How can I use Anquet or similar mountain mapping software on my iMac?

As a keen hillwalker I would like to be able to use Anquet or similar maps - at present I use well-worn OS 1:50,000 maps but would like to print out relevant maps for whatever hill I'm doing, and possibly also get into using a GPS.
According to the Anquet website their software doesn't work on Macs. I don't want to switch to PC but might have to. Any way round the problem without costing too much?

you could try looking at this-
http://ipod.about.com/od/ipad/qt/sync-photos-to-ipad.htm
Basically
>open itunes
>go to ipad device screen
>photos tab
>you should get the option to sync folders containing pictures from your mac
>select the folders you wish to sync
>hit sync button

Similar Messages

Can I use ISYS Ordnance Survey (UK) map software on my iMac G3 (OS 10.3)?

I have found mapping software on the UK Ordnance Survey website which supposedly works on Macs (most of this type of product eg Anquet apparently only works on pcs)
However when I enquired if it would work on my iMac G3, OS 10.3, the reply I got said that they weren't Mac experts but many of their users are running on Macs and "the options depend on the chip set on the Mac" and that "the results are great once you get the right emulation"
How do I find out what chip my iMac has? The Apple website only seems interested in selling me new stuff.
What is "emulation"? How can I find out what's needed for particular software?
The software seems to be just what I want - maps which I can print, 3D pics of area on map, hillwalking route-planning, etc, but it's expensive and I don't want to buy it and find it's no use on my Mac.

Sorry, if your computer came with 10.1.5, you can't install an earlier OS on it. If you are in the US, call Apple Customer Relations 800- 275-2775 and ask the for your instal discs.
If, as I suspect, you are in Germany, call your local Apple store and talk to them.

How can I use my Macbook as a dual monitor with my iMac?

How can I use my Macbook as a dual monitor with my iMac?

Then you want to use what's called Target Display Mode.
iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable
Target Display Mode And Thunderbolt

How can I use my old imac24" 2008, with my. New iMac 21,5" as a monitor? What camble do I need ? new iMac

How can I use my old mac 24" as a second monitor? What cable do I need?

https://discussions.apple.com/docs/DOC-6351 may offer some techniques.

How can i using datasource in toplink's map file

In the TopLink map :
<toplink:login xsi:type="toplink:database-login">
<toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</toplink:platform-class>
<toplink:user-name>test</toplink:user-name> <toplink:password>C23487CFA591952D44310804F3D591CB</toplink:password>
<toplink:sequencing>
<toplink:default-sequence xsi:type="toplink:native-sequence">
<toplink:preallocation-size>1</toplink:preallocation-size>
</toplink:default-sequence>
</toplink:sequencing>
<toplink:driver-class>oracle.jdbc.driver.OracleDriver</toplink:driver-class>
<toplink:connection-url>jdbc:oracle:thin:@192.168.0.1:1521:testdb</toplink:connection-url>
<toplink:bind-all-parameters>true</toplink:bind-all-parameters>
</toplink:login>
How can i modify it using datasource?

The login information stored in the map file is good for direct connection and design time login information.
For your runtime login information I would use the sessions configuration (sessions.xml). It provides complete deployment configuration:
   <session>
      <name>my-session</name>
      
      <project-xml>META-INF/employee-basic.xml</project-xml>
      <session-type>
         <server-session/>
      </session-type>
      <login>
         <datasource>jdbc/TopLinkDS</datasource>
         <uses-external-connection-pool>true</uses-external-connection-pool>
         <uses-external-transaction-controller>true</uses-external-transaction-controller>
      </login>
      <external-transaction-controller-class>oracle.toplink.essentials.transaction.oc4j.Oc4jTransactionController</external-transaction-controller-class>
      <enable-logging>true</enable-logging>
      <logging-options>
         <log-exceptions>true</log-exceptions>
         <print-thread>false</print-thread>
         <print-date>false</print-date>
      </logging-options>
   </session>Doug

How can I use apple remote with Mountain Lion? Any Front Row alternative?

Hi All,
I recently upgraded from Snow Leopard to Mountain Lion.
All great except for my Apple Remote control.
Before, I could effectively control my iMac media with Apple Remote by using Front Row (music, photos, videos, good integration with iTunes and iPhoto).
Now, as I understand, Front Row is expired.
So, my Apple remote still works but with very limited options (just music, forward, backward and volume), and it's a real pity.
Any of you Guys know how to restore Front Row?
Otherwise maybe suggest an alternative (sth similar, should allow iMac media control by Apple Remote)?
So far I tried to restore all Front Row files by a Time Capsule Snow Leopard backup (as indicatred on some other Communities).
To restore was easy, but then, no way to launch it.
Any advice will help!
Thanks in advance/all the best.
Marco

Thanks Klaus1 for your prompt answer, although I went again through a dated discussion.
I also got the feeling that somehow they want to push Apple TV..
But, respectfully speaking towards our Friends at Apple, is it fair to promise what you don't deliver?
I have choosen apple because I percive it's different.
At currently published link: http://store.apple.com/uk/product/MC377Z/A/apple-remote
they do promote the following:
Apple Remote with Mac
The Apple Remote gives you total command of your music, photos, videos and DVDs from anywhere in the room. It works with Front Row - a menu-based, full-screen interface - to make accessing the digital content on your Mac as simple as navigating your iPod. When you press the Menu button, your desktop fades and the sleek, Front Row interface takes its place, to give you control over your music in iTunes, your photos in iPhoto, the videos in your Videos folder and your DVDs. Turn up the volume. Shuffle. Skip to the next chapter on your DVD. Play a slide show, a home video that you made in iMovie, even a film trailer.
Compatible with Apple products introduced in 2005 or later that have a built-in infrared (IR) receiver. Not compatible with MacBook Pro with Retina display.
Cost for this is 15£ (19€).
Now, I have iMac and Mac Book Pro (no retina display) both with Mountain Lion installed, and I understand both of them are not compatible with Front Row.
Actually I adore apple tv and I got 2 at home nicely working on 2 different TVs.
So I accomplished twice their wish of selling this product to me.
Why shall they deceive me (and many others, as I read) by killing a still promised service?
Should I read all forums before buying a trusted-brand-product like apple, to ensure that id does what declared?
Don't get me wrong, I'm an enthusiast user of the whole apple family, since many years, and still I am.
Just politely complaining for this decision, which creates to Many an easy avoidable disservice.
Cheers
Marco

How can I use Boot Camp in Mountain Lion to mount Windows XP?

I would like to use Windows XP on my 2009 13" MBP in Boot Camp? I have tried and it only asks for Windows 7 and when I use XP it says unable to install.
1. Is this usual?
2. If so, is there a work around?
I do not have Windows 7 nor will I purchase it. I want to use this computer primarily as Widows XP as my new 2012 MBP is for Mac! Please help!
Thank you!

I concur with dalstott with the following additional information:
1. I am currently typing on my 2009 MBP. I installed Windows XP in Bootcamp soon after I purchased it. I then upgraded it to Snow Leopard and then later to Lion, and Lion is what I run today.
Bootcamp continues to function with Windows XP installed. I also have Parallels 7, and, as one of the features of Parallels, I am able to use the Bootcamp partition to run Windows XP within Parallels, as well, for concurrent use of Windows XP and Mac OS X Lion (saving me the duplication of hard disk space if I had to have both the Bootcamp partition and the very large file that Parallels would create for Windows XP).
2. There may well be a way for you to install Bootcamp and Windows XP in Mountain Lion without restoring Snow Leopard:
This method requires access to a WIndows 7 upgrade disc, but you do not need the serial number and you never actually upgrade to WIndows 7 (stop after Step 8):
User Tip: BootCamp - Install Windows XP & then Windows 7
NOTE: Although the author of this User Tip suggests that it will work on all Macs running Mt. Lion, if you read the thread, you will see that others have had problems, and my post suggesting that this method will only work if the Mac could originally install Bootcamp with Windows XP such as yours and mine.
3. While searching for tip #2, I also came up with this suggestion:
Installing WinXP on Lion or above without BootCamp
Good luck and be sure to come back and let us know what works for you!

How can I use Microsoft Office on two user accounts on one IMAc?

Dear all,
I have installed Microsoft Office 2011 on my IMac which I have recently bought. I did this on the (at that time) only user account in place: the administrator account.
A little time after this my wife and I decided it would be much easier to us to make an additional user account on the same computer for my wife (also with administrator rights), so we could have our own settings, desktop preferences etc. So now we have two user accounts/profiles on one Imac, so far so good.
But when my wife signs in on her account, she is not able to use Microsoft Office . Office seems to be only available to the user account on which it has been installed initially: 'my' account.
Can anyone help us out here and tell us how we can make Office available to my wife's user account as well? I understand that the licence of Office is restricted to one computer, but what about two accounts on the same IMac? I mean, it is still one computer, one 'home', one family etc.
We would appreciate your help here!
Kind regards,
Jurjen

As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications. There is no additional licensing required for additional user accounts on the same Mac.
Each user account is able to run the Office apps. The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder).

How can I use my rMBP as a secondary display for my iMac using thunderbolt?

Based on this thread, it's not possible: https://discussions.apple.com/message/19207767
But, I'm stubborn and refuse to believe that. Maybe they've released a software update (e.g., in Mountain Lion) that has since made this possible? Maybe there is an app that allows for this?
Note that I don't want a solution that involves network hacks... this is at work, and I'd rather not slow down the network for others. And I'm not interested in the reverse setup (i.e., using my iMac as a secondary display for my rMBP).
iMac: 27-inch, Late 2012. NVIDIA GeForce GTX 660M 512 MB. OS X 10.8.4.
rMBP: Retina, Mid 2012 (15" I think). NVIDIA GeForce GT 650M 1024 MB. OS X 10.8.4.

It's not possible. You can use the iMac as a display for the MBP, but the reverse is not possible. The MBP does not have Target Display Mode as a feature and no third-party app nor hack can enable something that doesn't exist. The only way to accomplish this will be one of the network solutions.
Regards.

How can I use loop in graphical message mapping

The source input XML is like:
<bookstore>
<book>
       <item1>xxx</item1>
       <item2>yyy</item2>
</book>
<book>
        <item1>zzz</item1>
       <item2>www</item2>
</book>
</bookstore>
I want to create an output XML like
<output>
   <item>
        <item1>xxx</item1>
         <item2>yyy</item2>
    </item>
   <item>
        <item1>xxx</item1>
         <item2>www</item2>
    </item>
   <item>
        <item1>zzz</item1>
         <item2>www</item2>
    </item>
   <item>
        <item1>xxx</item1>
         <item2>yyy</item2>
    </item>
</output>
That means I want to do permutation and combination for all <item1> <item2> under <book>.
Of course I can write a customer function to do it, but I want to basically use the buildin functions to do the graphical message mapping for this.
Any idea? thank you.

well, I'm not very clear of those 2 English words
What I want is to list all possible combination of item1 and item2 (and in fact, we have item3, item4, ....etc).
example
input:
<item>
          <item1> 111 </item1>
          <item2> 222 </item2>
          <item3> 333 </item3>
</item>
<item>
          <item1> aaa </item1>
          <item2> bbb </item2>
          <item3> ccc </item3>
</item>
I want to get
<item><Item1>111>/item1> <item2>222</item2> <item3>333</item3> </item>
<item><Item1>111>/item1> <item2>222</item2> <item3>ccc</item3> </item>
<item><Item1>111>/item1> <item2>bbb</item2> <item3>333</item3> </item>
<item><Item1>111>/item1> <item2>bbb</item2> <item3>ccc</item3> </item>
<item><Item1>aaa>/item1> <item2>222</item2> <item3>333</item3> </item>
<item><Item1>aaa>/item1> <item2>222</item2> <item3>ccc</item3> </item>
<item><Item1>aaa>/item1> <item2>bbb</item2> <item3>333</item3> </item>
<item><Item1>aaa>/item1> <item2>bbb</item2> <item3>ccc</item3> </item>

How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac? There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac? Thanks ...

Thanks again!
Hmmm ... I wonder. The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it). When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones. I will certainly try your solution - what do I have to lose? If they don't work, then I get new ones - or try something else.
Many thanks for your time!

How can I use QT pro automator actions in Mountain lion?

I am using mountain lion with 2012 late iMac and recently I bought QT pro.
And I try to use automator actions with QT pro, but there are only actions for QT 10 player.
How can I use QT pro actions in automator?

I have the exact same problem.
I have an US keyboard but when I press the button with tilde I get this: § or this ±
This looks like british keyboard to me

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

HT5437 How can I use apple TV to connect my computer to the tv screen as an external monitor?

How can I use apple TV to connect my computer to the tv screen as an external monitor?

Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario

Can I use, and how can I use voice control with my iPad 2?

Is it possible to use the voice control with my iPad 2? If so, how can I use it? Since there is no siri for iPad yet, I'd like to use something similar to it and I've seen this built in voice control before but I was not sure if it's possible with the iPad.

Not yet, however you can download the new google app. This offers voice seeking on the net.

How can I use Anquet or similar mountain mapping software on my iMac?

Similar Messages

Maybe you are looking for