How Can i Use /db2/ DBSID /saptemp* tablespace in DB2 9.5
Hi Guys,
I have installed a new system DB2 and at the time of installation i defined 1 mount point as /db2/SID/saptemp1 but it is not being used. I have two queries ?
1. How can i use /db2/SID/saptemp1 tablespace in DB2 at the time of installation ?
2. How can i use /db2/SID/saptemp1 tablespace in DB2 after the installation?
Please mention the note number if available for same solution.
Thanks in Advance....!!!
Regards,
Hello,
with newer SAPINST versions, tempoary tablespaces are created in the /db2/SID/sapdata(n) filesystems.
To answer your questions:
1) This depends on the SAPINST version, but usually there is an option that lets you create the tablespaces manually. Check if there is an Option in the SAPINST dialog "Create Tablespaces with SAPinst.". If you deselect it, you can create them manually.
2) The procedure would be to create a new temparay tablespace in your preferred filesystem(s), to drop the old one and optionally to rename the new one to the old name.
Regards, Hans-Juergen
Similar Messages
-
How can free + used space tbs size, can someone explain
Hi Gurus
Can someone explain this, How can free + used space in a tablespace can be greater than size of a tablespace. What am I missing here . Thanks a lot .
I am on 10.2.0.1, HP-UX
14:38:52 SQL> select owner,sum(bytes), sum(BYTES) /1024/1024 "MB" from dba_segments where tablespace
name='USERDB1ADATA' group by owner;
OWNER SUM(BYTES) MB
USERDB1A 839680000 800.78125
1 row selected.
14:40:42 SQL> select bytes, BYTES /1024/1024 "MB" from dba_data_files where tablespace_name='USERDB1
A_DATA';
BYTES MB
3758096384 3584
1 row selected.
14:40:42 SQL> select sum(bytes) , sum(BYTES) /1024/1024 "MB"from dba_free_space where tablespace_nam
e='USERDB1A_DATA';
SUM(BYTES) MB
3067412480 2925.3125
1 row selected.
14:40:43 SQL> select 839680000 + 3067412480 "used + free space" from dual;
used + free space
3907092480
1 row selected.
New DBAGood point, Howard, about the recycle bin. So I cleaned up, recreated the table, filled it, dropped it but did not purge it, and ...
SQL> create table test.x tablespace test as select * from dba_objects where 1=2;
Table created.
SQL> insert into test.x select * from dba_objects;
12617 rows created.
SQL> commit;
Commit complete.
SQL> drop table test.x;
Table dropped.
SQL> with
2 dbf_size as (select sum(bytes) size_
3 from dba_data_files where tablespace_name='TEST'),
4 dbf_free as (select sum(bytes) free_
5 from dba_free_space where tablespace_name='TEST'),
6 dbf_used as (select sum(bytes) used_
7 from dba_segments where tablespace_name='TEST')
8 select size_, free_, used_, (size_ - free_ - used_) left_
9 from dbf_size, dbf_free, dbf_used
10 /
SIZE_ FREE_ USED_ LEFT_
5242880 5177344 2162688 -2097152
SQL>and then I played around with my SQL and came up with
WITH
dbf_size AS (SELECT SUM(bytes) size_
FROM dba_data_files
WHERE tablespace_name='TEST'),
dbf_free AS (SELECT SUM(bytes) free_
FROM dba_free_space
WHERE tablespace_name='TEST'),
dbf_used AS (SELECT SUM(bytes) used_
FROM dba_segments
WHERE tablespace_name='TEST'),
dbf_fbin AS (SELECT SUM(bytes) fbin_
FROM dba_segments
INNER JOIN
dba_recyclebin
ON (tablespace_name=ts_name
AND segment_name=object_name)
WHERE tablespace_name='TEST')
SELECT size_, -- tablespace size
free_, -- free space reported
used_, -- segment space used
fbin_, -- segment space in recycle bin
(size_ - free_ - used_ + fbin_) left_ -- 64K overhead per data file
FROM dbf_size, dbf_free, dbf_used, dbf_fbin
/which does
SQL> WITH
2 dbf_size AS (SELECT SUM(bytes) size_
3 FROM dba_data_files
4 WHERE tablespace_name='TEST'),
5 dbf_free AS (SELECT SUM(bytes) free_
6 FROM dba_free_space
7 WHERE tablespace_name='TEST'),
8 dbf_used AS (SELECT SUM(bytes) used_
9 FROM dba_segments
10 WHERE tablespace_name='TEST'),
11 dbf_fbin AS (SELECT SUM(bytes) fbin_
12 FROM dba_segments
13 INNER JOIN
14 dba_recyclebin
15 ON (tablespace_name=ts_name
16 AND segment_name=object_name)
17 WHERE tablespace_name='TEST')
18 SELECT size_,
19 free_,
20 used_,
21 fbin_,
22 (size_ - free_ - used_ + fbin_) left_
23 FROM dbf_size, dbf_free, dbf_used, dbf_fbin
24 /
SIZE_ FREE_ USED_ FBIN_ LEFT_
5242880 5177344 2162688 2162688 65536
SQL> alter tablespace test add datafile 'C:\ORACLE\ORADATA\XE\TEST2.DBF' size 5m;
Tablespace altered.
SQL> WITH
2 dbf_size AS (SELECT SUM(bytes) size_
3 FROM dba_data_files
4 WHERE tablespace_name='TEST'),
5 dbf_free AS (SELECT SUM(bytes) free_
6 FROM dba_free_space
7 WHERE tablespace_name='TEST'),
8 dbf_used AS (SELECT SUM(bytes) used_
9 FROM dba_segments
10 WHERE tablespace_name='TEST'),
11 dbf_fbin AS (SELECT SUM(bytes) fbin_
12 FROM dba_segments
13 INNER JOIN
14 dba_recyclebin
15 ON (tablespace_name=ts_name
16 AND segment_name=object_name)
17 WHERE tablespace_name='TEST')
18 SELECT size_, -- tablespace size
19 free_, -- free space reported
20 used_, -- segment space used
21 fbin_, -- segment space used in recycle bin
22 (size_ - free_ - used_ + fbin_) left_
23 FROM dbf_size, dbf_free, dbf_used, dbf_fbin
24 /
SIZE_ FREE_ USED_ FBIN_ LEFT_
10485760 10354688 2162688 2162688 131072Message was edited by:
Hans Forbrich
Cleaned up the script and tested with second data file added to verify LMT overhead. -
How can I use multiple row insert or update into DB in JSP?
Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing. -
How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.
"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks -
how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?
If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.
-
How can I use one photo twice in a slideshow
I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
How can I use this one particular photo of her several times in the slide show.
I have tried copy/past and that does not seem to work.
Thanx in advanceI would just duplicate the picture several times and keep inserting duplicates ...
-
How can i use microsoft word on ipad 2
how can i use the microsoft application on my ipad 2?
The Pages app is also compatible with MS Word. Unlike some of the others mentioned, the document is actually stored on the iPad as opposed to 'the clouds'. Again, most of those mentioned are cut down versions of MS Word.
Stand back and look at this constructively; do you need to regularly access to the document from more than one computer/device without the need to keep amending your document on your computer and sending it to your iPad? If so, Documente to Go etc may be the best choice. -
How can I use the credit on my account instead of credit card to buy apps?
I have a gift card credit on my account but when I want to buy an app it takes me to my credit card details. How can I use my credit on my account instead of credit card?
You shouldn't have to put in a credit card, no, but from time to time the iTunes Store seems for some reason to try to insist on one. If just confirming your mailing address doesn't stop it from complaining, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
How can i use one SQL statement to solve problem?
How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET f = SUBSTR(f,
1,
length(f) - 2) || '01'
WHERE substr(f,
-2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET f = SUBSTR(f,
1,
length(f) - 2) ||
DECODE(SUBSTR(f,
-2),
'00',
'01',
SUBSTR(f,
-2)); -
How can i use one iCloud Photostream on 2 devices?
Due to a bug (or feature) on iOS 8 i can't use the same icloud id on 2 iphones:
https://discussions.apple.com/thread/6536998
So how can i use ONE iCloud Photostream then on 2 devices?
Also, on OSX i can define only one Photostream.
So, how do you import pictures from 2 streams into iPhoto?
Familyshare is not usefull as the pictures are not in Original-Filesize!Hi ..
Yes. " iPhone 6 or 6 Plus. iPad Air 2 or iPad mini 3"
Set up and use Apple Pay -
Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
ThanksIt is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.
-
How can I use same account in 2 iphone with diff contact list?
how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out. -
How can i use my ipod on 2 computers without deleting my music
how can i use my ipod on 2 computers without deleting my music on ipod?
See here: Using iPhone, iPad, or iPod with multiple computers
B-rock -
How can I use home sharing between our iphones (create playlists from both accounts at once)
How can I use home sharing between our iphones, so that we can create playlists with songs from both of our libraries? We share a Macbook Pro (separate accounts) and each have the new iphone, but when I have my iphone and try to create a new playlist, I can only grab songs from one account. Is there a way to create a playlist using both accounts since we are sharing?
Does it have to be created within iTunes first on our Mac?The short answer: because Home Sharing isn't designed for sharing apps, and apps aren't designed to be shared.
The longer answer: Think of it like this...
You download some music in iTunes. With Home Sharing, another user can listen to it by streaming it over the network. But the data itself is on your computer. If you turn off the computer or take it off the network, the other user can't access it.
But if you send another user the app, they aren't just streaming the data- they installed it on their iOS device. Because they weren't the one that purchased it, such a transfer could easily be considered "piracy" or "stealing," and nobody likes that (least of all, Apple).
When iTunes sees this app, it obviously recognized it, as if saying, "Hey, how did you get this app on your device, if I have no record of you purchasing/downloading it from the iTunes store?"
post edited to correct spelling errors -
How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library
read this
https://discussions.apple.com/message/20429789#20429789
Maybe you are looking for
-
Anyone have list of issues fixed in 8.01? thanx...
Hi all (happy holidays) Anyone have list of issues fixed in 8.01? thanx... ps: I'm on a G5 and was hoping that 8.01 runs noticeably better now.... SvK Message was edited by: S v K
-
Unable to create the Invoice list
Hi We are recently went to go live. We have an issue related to the Invoice list. The issue is like this.......... 1. User wasnot maintained the information in Payer master data(Invoice list date & invoice dates). 2. He created the sales order, deli
-
Will Restore in Leopard Disk Utility reliably copy a drive with bootcamp?
I have a drive partitioned part OS X and part Bootcamp (with Windows XP installed). If I use Apple's Disk Utility to 'Restore' the drive (to copy the drive to a larger drive) will this work reliably for bootcamp as well as the OS X content? Presumabl
-
i have a 2nd generation ipod touch im getting the screen repaired. is it possible for apple to send me a 4th or 3rd generation ipod touch, say if they ran out of 2nd generation ipods?
-
KW Repositories are not displaying
hi I am not getting the list of Repositories in the system at Content Administration -> KW Content. Please help me what is the problem and solution thanx in advance regards kantha