How can I use Drupal as a third party CMS with ATG E-Commerce Application?

Hi Friends,
We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
Regards,
Krishna.

I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041. It compares Today to the vacation elig. date and if they match, set a time type indicator to 1. I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours. Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage. In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

Similar Messages

How can I use iCloud calendars for third party webapps?

Hi, I thought of having my calendar on a page, where I also type in my AppleID and then be able to read (and write) new calendar-entries.
Is that possible? If so, how?

iCloud calendars are just industry standard CalDAV calendars, so assuming you have the programming knowledge to use the CalDAV protocol you can read/write to iCloud calendars.
These links may point you in the right direction:
http://www.quora.com/Will-Apple-iCloud-also-publish-an-API-to-read-write-the-cal endar-data
http://stackoverflow.com/questions/9751255/apple-icloud-calendar-api
Apple also has a specific iCloud section of their Developer site, but you need to be a registered developer to access it:
iCloud for Developers - Apple Developer

How can i clean off all my third party applcations

How can i clean off all my third party applacations from the internet?

Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are also several shareware utilities that can uninstall applications:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

How can I use Aperture 3 on my new iMac with Maverick?

How can I use Aperture 3 on my new iMac with Maverick?

Do you own a copy of Aperture, perhaps bought for another Mac?
If you have not bought Aperture, you need to buy it from the AppStore.
But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac. Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac. Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
Léonie

Can i use technical system type 'third party' for r3 system in idoc2file sc

Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
Rajesh

Hi,
<i> can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.</i>
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
<i>And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.</i>
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar.

How can i use isight camera to broadcast to web with Mac OS 10.4?

I am using an iBook G4 running OS 10.4 as a printer server. I have to do this to be able to print on my HP DeskJet 882c printer from computers running OS 10.6 and above (although I have not been able to get it to work with 10.8).
I can connect an iSight camera to the iBook via FireWire. Can I set that up to broadcast a video feed to a web site so I can visually monitor the area near the laptop and printer?

jrmnewtonma wrote: How can i use isight camera to broadcast to web with Mac OS 10.4?
You could use compatible older versions of QuickTime professional extensions for your Mac OS X version.
This professional quality software is very powerful, and it will certainly stream any video you need. However, it is not simple to use, so be prepared to do some research and study to get it configured and working.
To use your iBook with its OS X 10.4, you will need QuickTime Broadcaster 1.5.3
and Darwin Streaming Server (v5.5.5) (if you need streaming server functions.)
Although I have never used it, QuickTime Streaming Server 4.1.1 might be a useable substitute for Darwin.
Message was edited by: EZ Jim
Mac OSX 10.8.3

How can I use my Macbook as a dual monitor with my iMac?

How can I use my Macbook as a dual monitor with my iMac?

Then you want to use what's called Target Display Mode.
iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable
Target Display Mode And Thunderbolt

HOW CAN I USE FACETIME IN MY MAC TO SPEAK WITH MEXICO??

HOW CAN I USE FACETIME IN MY MAC TO SPEAK WITH MEXICO??

where are you located? in some middle eastern countries facetime is blocked by the government.

How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac? There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac? Thanks ...

Thanks again!
Hmmm ... I wonder. The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it). When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones. I will certainly try your solution - what do I have to lose? If they don't work, then I get new ones - or try something else.
Many thanks for your time!

How can I use the media Buttons on my M40X with WinAmp?

Hello
Today I got my M40X and i have a question.
There are 5 media Button left of the keybord (CD/DVD, Play/pause, Stop, <-/->)
Is it possible to use them with WinAmp?
In the Toshiba Assist i got the CD/DVD button used to start WinAmp (by use him to start a .exe) but the Play/pause...dont work. In the field media Apps the only Player i can choose is Win MP10 (I hate this piece of sh*t).
How can I use these Button with WinAmp?

Hello
As far as I know the Toshiba Controls were tested and designed only for Microsoft Media Player and WinDVD. How this topic says:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3621&messageID=11461#11461
I dont have any experience with WinAmp but I found useful info in this forum about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6673&messageID=24448#24448
Check this.
Bye

How can I use Apple Caching Service on a Network with Multiple Public IPs?

Hello!
I help manage a network of ~4000 clients for a small liberal arts college in Michigan. I'm looking into the possibility of implimenting Apple Caching Server for our network.
We have one 400mbit pipe out to the internet, and all of our clients are given public-facing IPs to the internet. A caching server would be great, especially on update days. All wireless clients are on the same subnet, which is where I'd like the server to be serving the cached copies.
I have installed Mavericks on a fresh machine, downloaded OS X Server 3.0.3, and attempted to start the caching service. This is what I get.
Unable to start service.
Caching cannot be run on a public network. Consult documentation.
How can I get this up and running?

The way the Caching server works is that the server will be accessing the Internet and when doing so traffic will be coming from it via a particular public IP address. Usually this will not be the address of the server itelf but your router as for most networks NAT is used. In this by far more common scenario the client Macs (and likely iOS devices) will be going through the same router and hence show up via the same public IP address.
If the client request is the same as the address registered via the Caching server then Apple redirect the request via the Caching server.
The setup would look something like this -
           Internet
                |
            Router (with NAT)
                |
(LAN)     +------Caching Server-----Client devices
With this setup because everything is using the same public IP address Apple can reasonably assume everything is on the same network and trigger a redirection to your Caching server.
If you try a setup like the following with the Caching server having its own public IP it will not work because the Caching server and client devices will have different public IP addresses
           Internet
               |
           Router (no NAT)-------------------+
               |                                      |
            Firewall (with NAT)       Caching Server
               |                                      |
               |                                      |
(LAN)     +-----Client devices-----------+-----------
Your configuration as described is more like the following
           Internet
               |
           Router (no NAT)
               |
(LAN)     +------Caching Server-----Client devices
With yours not having NAT each device has its own public IP address including the Caching server and Apple cannot redirect traffic as it thinks they are on different networks.

XCode: How can I use dictionary controllers for 2 dict's with a common key?

I have two dictionaries, both with the same key. Using Interface Builder I can build for each dictionary a two-column table, but I did not find out how to connect their keys so that selecting a line in one table automatically selects the corresponding line in the other table.
Does there exist a binding between the two controllers that solves the problem? If so, how can it be established?
(First I tried to use only ONE table - with 3 columns. This appeared to me the best way. But again I could not establish the appropriate binding.)

Hans,
You may want to post your question in the following group.
http://discussions.apple.com/forum.jspa?forumID=727

How can I use the function keys in a GUI with swing?

I'm wondering how do you declare you want an action to happen when a user uses a function key or any key for that matter. How can you specify something frame wide or for that matter for a specific jtextbox?

you need to use an accelerator
setAccelerator(javax.swing.KeyStroke.getKeyStroke(java.awt.event.KeyEvent.VK_A, java.awt.event.InputEvent.SHIFT_MASK | java.awt.event.InputEvent.CTRL_MASK)

How can I use a U.S. iTunes gift card with Cdn registration?

System does not recognize U.S. code on gift card on the Canadian site and I do not know how to cancel my Canadian registration so that I can set up a U.S. registration. I have addresses in both countries so it appears I should be able to register and buy songs when I have gift cards in both U.S. and Canadian dollars and depending on which country I am in.

Gift card are country specific. You can not use any country's gift card in another country.
You cannot buy from another country's itunes store either.
You may be able to sell your itunes card to someone in the U.S. and buy a Canadian itunes card.

How do I use Thunderbird to send third-party email through Verizon SMTP?

What exact settings do I need to select in Thunderbird for outgoing email in order send email? I have a third-party email address, not Yahoo or Verizon.
Based on other posts, I have set:
server name: outgoing.verizon.net
port: 587
CHECKED 'use name and password'
username: entered verizon username
use secure connection: 'no'
When I try to send email, I get prompted for password multiple times, then ultimately get "Send Message Error" - 'Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.verizon.net failed...'

Your verizon.net password is not necessarily the same as your .com password. I have downloaded Thunderbird and tested send/receive using the verizon.net outgoing server and it works just fine, so it is something in the settings you are using.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

How can I use Drupal as a third party CMS with ATG E-Commerce Application?

Similar Messages

Maybe you are looking for