How can I use Elements as Edit in using a Lightroom?

How can I use Elements as Edit in in Lightroom using a Lightroom picture. I followed instructions: Photo/Add in/ and received in Elements a blanco screen instead of the picture selected in Lightroom. Please further instructions before ordering Elements 11.

Dear Andaleeb,
I have followed instructions as follows: In Lightroom I have installed Elements under extra plug inns. (on top of the screen reference is made to Photoshop and not Photoshop 11). Under photo, cmd-e does not work since Photoshop is colored gray. As I have Elements installed under extra plug-inns this is highlighted. BUT………..Clicking that, the picture selected does NOT appear in Elements. The screen remains being empty! How can I solve this?
Mr. F.K.A. de Haan
Op 4 mrt. 2013, om 14:50 heeft andaleebfatima1 <[email protected]> het volgende geschreven:
Re: How do I use Elements as a plug in for Lightroom? After plugging no picture appears in Elements!
created by andaleebfatima1 in Photoshop Elements - View the full discussion
Please ensure that you have added PSE Editor as external editor for Lightroom. See : http://www.photoshopelementsuser.com/html/integrate-lightroom-with-ele ments/
Thanks
Andaleeb
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5119785#5119785
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5119785#5119785
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5119785#5119785. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

How can I see previously ViewNX2-edited photos (raw) in Lightroom 3?

I recently bought Lightroom 3, and after importing my previously ViewNX 2-edited photos (in RAW, NEF), I saw that Lightroom doesn't show those changes. I can only see the photos in its original form.
Is there a way to import them to Lightroom 3 and see the changes made in ViewNX 2?
Thanks.

If you want your VNX2 adjustments to appear in LR, you'll have to export as TIFF or JPG from VNX2 and import that file into Lightroom.
Hal

How can I measure selected area of pixels using photoshop elements 12?

how can I measure selected area of pixels using photoshop elements 12?

Show the 'information' panel F8).
In the middle horizontal section, select 'pixels' on the left drop-down menu.
Use the rectangular marquee tool to select your area: the dimensions in pixels of the rectangle is shown under 'dimensions' on the right.
I think there are other ways to measure a line segment, but you could use the above measure by adjusting the rectangular marquee tools to both extremities of the segment,
- use the move tool to rotate the rectangle so that the diagonal measuring the segment is horizontal,
- move the rectangle to the left, and check validate, which creates another rectangle including the first one
- read the pixel dimension (L:) in the info panel like above.

How can we update data in LDAP server using PL/SQL.

Hi,
How can we update data in LDAP server using PL/SQL program.
Is there any sample code for refrence.
Thanks,
Tarun

Hi Justin,
Thanks for your help. You got my correct requirements.
Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
I have the following information:
the admin user and password,server info , port and ldap_base for admin.
I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
Please help me.
Thanks,
Edited by: james. on Jan 12, 2009 5:39 PM

How can I create a new entry without using LOV for foreign keys.

Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
How can I create a new employee without using LOV for the foreign key "job_id".
On the first page I would like to choose the job_title from adf read-only table.
After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
Regards M.Winkler
Edited by: user3541283 on 06.10.2008 03:44
Edited by: user3541283 on 06.10.2008 03:50

Hi,
usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
Frank

How can I get the File, Edit, View, Windows ect to show in Organiser

While on various tutorials they all show a
menu of file, edid, view ect in the top left hand corner of the screen, mine shows only a small square box that when clicked give you the option of restore, close minimise ect. How can I get the file edit menu to show. Should have said in Photoshop Elements 9.

Thanks Barbara that's done the trick

How can I get Elements 11 to open up in Organizer rather than Editor?

How can I get Elements 11 to open up in Organizer rather than in Editor?

Well, you can go to Window>Welcome and make your change there, but the welcome screen leaves a process always running, so you would do better to go into the Program Files or Program Files (x86) in windows or the applications folder on a mac and find the actual .exe/application for the organizer and make a desktop shortcut/dock icon and use that in the future to launch the organizer, avoiding the welcome screen entirely.

How can we set Entitlment to "Edit " functionality of Portlet.

Hi All,
I have requirement, where in default "Edit " functionality is used in a portlet.
Edit is mapped to JPF.
This "Edit" is for Administrators only.
I am wondering : Is there a way for setting Delegator Admin Entitlement for
this "Edit" functionality in portlet??
TIA,
RAM

Thanks Philip, pls do let me know how can it be applied to "Edit" - Prashnath
Bhat.
"Phil Griffin" <BEA> wrote:
There is no direct support for this. A workaround may be to recreate
the DA role as a visitor role and apply it to edit.
-Phil
"RAM" <[email protected]> wrote in message news:403c20f7$[email protected]..
Hi All,
I have requirement, where in default "Edit " functionality is usedin a
portlet.
Edit is mapped to JPF.
This "Edit" is for Administrators only.
I am wondering : Is there a way for setting Delegator Admin Entitlementfor
this "Edit" functionality in portlet??
TIA,
RAM

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

How can I deactivate Elements 7 so I can install it on a newer computer?

How can I deactivate Elements 7 on one computer so I can install it on a newer computer? I tried clicking the help button and then there is not a deactivate button.

It may not be necessary as you are permitted two activations.
Deactivate is only available under the Help menu in Full Edit, not from the Organizer menu.

How can I rename an established wireless network using airport extreme?

How can I rename an established wireless network using airport extreme?

Thanks for the info. On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Extreme
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window that appears
Edit/backspace out the Wireless Network Name and type in a new name that you want to use
Click Update at the lower right of the window
Wait a full minute for the AirPort Extreme to restart
Close AirPort Utility
The new network that you named will use the same network password that you set up originally.

How can I automatically close a dialog box using Javascript after I click the OK button to submit it?

How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
Thanks
Linda

JS can not interact with open dialogs in any way, unless it's a dialog
created in JS using the Dialog object.
On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]>

How can I create an csv/excel file using pl/sql and then sending that file

How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

968776 wrote:
How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
Whay do you want database (pl/sql) code to do these things?
Anyhow, you may be interested in :
{message:id=9360007}
{message:id=9984244}

How can I open and close private browsing using an IPAD mini in IOS 7?

How can I open and close private browsing using an iPad mini in ios7?

Tap the '+' to the right of the URL field to open a new tab, and at the bottom left of the screen there should be a 'Private' button - tap that and you can then go to the site that you want to go to

How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now

How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
Thanks....

Launch Keychain Access and click on Login in the left hand pane and then on Passwords. Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up. That will give you the ID no. and password.
OT

How can I use Elements as Edit in using a Lightroom?

Similar Messages

Maybe you are looking for