How can I use EOS 6D RAW files with Aperture 3.2.4?

The EOS 6D RAW support for Aperture requires Aperture 3.4 or later. I tried to update to Aperture 3.4 but that requires OSX 10.8.3. I am stuck with OSX 10.6.8 for a while because I use Adobe CS5.5 and it is not compatable with newer OSX. So i do not seem to have a path for 6D RAW support. I can use my EOS 20D RAW files just fine. What is it about the 6D RAW file that necessitates OSX 10.6.8 or Aperture 3.4?

The common way is to try converting to DNG and then use the DNGs with Aperture. The drawback (other than the format conversion) is you lose camera specific optimisations with the DNG (mostly noise reduction tweaks for specific ISO values and colour tweaks).
In the past it would have been easy to edit a few config files to get Aperture to recognise new cameras with similar sensor tech as existing cameras, but this data is now encoded so can't be changed. It is a bit frustrating when you know there is nothing special about the sensor and Aperture would be able to process the data just fine.
Andy

Similar Messages

HT4007 I have just transferred all my raw, jpeg & tiff files into LR4 and using to opportunity to delete old raw files to free up disc space. How can i completely remove a raw file from my msc disc??

I have just transferred all my raw, jpeg & tiff files into LR4 and using the opportunity to delete old raw files to free up disc space. How can i completely remove a raw file from my mac disc??

I'd be careful here: LR references files. It can copy them, like from an SD card to your hard drive, but it doesn't necessarily make duplicates. So when you say you "transferred" those files "into" LR it just means you referenced existing files. And if you delete those they're gone, unless you've made copies. LR does not import files by copying them into a managed library like Aperture does.

How can I use an old XMP file on a new set of images??

I have an older XMP file that contains settings used to retouch some previous images in a particular way. I'd like to apply those same settings to a new set of images. How can I use that older XMP file on a new set of images in Lightroom?
The contents of the XMP file are as follows:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40
">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
   <crs:Version>6.0</crs:Version>
   <crs:ProcessVersion>5.7</crs:ProcessVersion>
   <crs:WhiteBalance>Custom</crs:WhiteBalance>
   <crs:Temperature>4700</crs:Temperature>
   <crs:Tint>+4</crs:Tint>
   <crs:Exposure>-0.35</crs:Exposure>
   <crs:Shadows>5</crs:Shadows>
   <crs:Brightness>+50</crs:Brightness>
   <crs:Contrast>+25</crs:Contrast>
   <crs:Saturation>-8</crs:Saturation>
   <crs:Sharpness>25</crs:Sharpness>
   <crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
   <crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
   <crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
   <crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
   <crs:VignetteAmount>0</crs:VignetteAmount>
   <crs:ShadowTint>-1</crs:ShadowTint>
   <crs:RedHue>0</crs:RedHue>
   <crs:RedSaturation>0</crs:RedSaturation>
   <crs:GreenHue>0</crs:GreenHue>
   <crs:GreenSaturation>0</crs:GreenSaturation>
   <crs:BlueHue>0</crs:BlueHue>
   <crs:BlueSaturation>0</crs:BlueSaturation>
   <crs:FillLight>0</crs:FillLight>
   <crs:Vibrance>+5</crs:Vibrance>
   <crs:HighlightRecovery>24</crs:HighlightRecovery>
   <crs:Clarity>+8</crs:Clarity>
   <crs:Defringe>0</crs:Defringe>
   <crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
   <crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
   <crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
   <crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
   <crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
   <crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
   <crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
   <crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
   <crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
   <crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
   <crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
   <crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
   <crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
   <crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
   <crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
   <crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
   <crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
   <crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
   <crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
   <crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
   <crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
   <crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
   <crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
   <crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
   <crs:SplitToningShadowHue>138</crs:SplitToningShadowHue>
   <crs:SplitToningShadowSaturation>13</crs:SplitToningShadowSaturation>
   <crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
   <crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
   <crs:SplitToningBalance>0</crs:SplitToningBalance>
   <crs:ParametricShadows>0</crs:ParametricShadows>
   <crs:ParametricDarks>0</crs:ParametricDarks>
   <crs:ParametricLights>0</crs:ParametricLights>
   <crs:ParametricHighlights>0</crs:ParametricHighlights>
   <crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
   <crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
   <crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
   <crs:SharpenRadius>+1.0</crs:SharpenRadius>
   <crs:SharpenDetail>25</crs:SharpenDetail>
   <crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
   <crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
   <crs:GrainAmount>0</crs:GrainAmount>
   <crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
   <crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
   <crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
   <crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
   </crs:ToneCurve>
   <crs:CameraProfile>Adobe Standard</crs:CameraProfile>
   <crs:CameraProfileDigest>3DA8CE4A626CE36A1D0C55BF157793C9</crs:CameraProfileDigest>
   <crs:HasSettings>True</crs:HasSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>

I’m pretty sure Adobe NEVER intended for someone to copy an XMP file from one photo to another outside of LR as a way to replicate settings.   You can make a preset from a photo, as discussed, or if you don’t want to do that, copy-paste the settings from a representative photo that you initially select to one or more new photos. You could have a special LR folder that holds standard photos to copy/paste from. Of course creating a Develop preset from the representative photo is the “normal” way to handle such situations, but maybe you have hundreds of different situations to copy settings from and don’t want to create presets for each one, but I’d argue that you could create a complex folder hierarchy for your presets and still have them findable without that much problem.
As far as the mystery about why some photos show Reset and some show From Metadata, is the Process Version (down in Camera Calibration) of the photo before reading the settings the same between the two situations? And in general, are these virgin photos newly imported into LR or have some been modified in LR, already? Does an XMP file already exist for any of these, where that XMP is being overwritten by your external-to-LR copying? Or do you have auto-write-XMP enabled and your hand-copied XMP is getting overwritten by LR, automatically, before you have a chance to read in anything?

How can I view my 6D raw files before I open them in post processing?

How can I view my 6D raw files after I load them on my computer & before I open them on a post processing Program?
I have no problem doing that with my 1DX,1DIV or 5Dmk III. This problem exist with any sdhc card I use on the 6D, but not on any other camera with the same cards.
Solved!
Go to Solution.

Your computer doesn't have camera RAW support installed for a 6D. RAW isn't really a standard-format... it's more of a concept. Every individual camera has it's own unique RAW format (even though they all have the same .CR2 extension).
Each time a new camera comes out, companies that make RAW processing software will make an update available that adds that camera. You'll need to get that update and install it.
Tim Campbell
5D II, 5D III, 60Da

How can i open Nikon D610 RAW files in Element 12 ?

How can i open Nikon D610 RAW files in Element 12 ?

You need the ACR 8.3 plug-in to open D610 NEF files.
Check what Help / About Plug-ins / Camera Raw reports for the version number.
If it is something less than 8.3, update to the ACR 8.3 plug-in using Help / Updates from the Editor. If that says there are no updates, then uninstall and re-install and try again.
If it is already ACR 8.3 then the files are likely corrupted by using an obsolete version of Nikon Transfer or ViewNX with them.
You can fix that corruption using a utility from the following webpage, where 14-bits is likely what you’d want to specify, and only use Nikon utilities that are as new as your camera:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

To test how can we use the opt 'logical file name' to name the file based

Hi Sir/Madam,
to test how can we use the opt 'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.

Hi Vishali,
In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
Rest of the process is same as that of extraction from local file.
Regards,
Durgesh.

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

How can I use a Verizon iPhone 5 with US Cellular?

How can I use a Verizon iPhone 5 with US Cellular?

You can't. Doing so is not supported.

I purchased a iphone i USA. How can i use this iphone in india with vodafone.

I Purchased a iPhone 5s in USA. How can I use this phone in India with Vodafone.
<Edited By Host>

First, the iPhone would need to be unlocked. That would depend on where you bought it. Next, the North American phone would not work with all of the networks outside of the US. Also, the warranty for the device is only good in the US, so if you have a problem with the phone, you would need to bring it back to the US to an Apple Store. Where did you purchase the phone?

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

What application can you use to open a file with the .acc extension?

What application can you use to open a file with the .acc extension?

http://www.fileinfo.com/extension/acc

How can I use my photoshop elements 10 with windows 8 upgrade

How can I use my photoshop elements 10 with my windows 8 uograde

All versions of PSE except versions 1, 3, 5 & 6 will work with Windows 8.
Microsoft Windows 8 compatibility.

How can I transfer my edited RAW files to a flash drive?

I have 30 RAW files (NEF) from a holiday party that I have edited, and would like to give to a friend for further editing. We both work on Macs. I selected the 30 photos in Bridge, went to "Copy to" and selected the flash drive. The raw files along with their xmp files show up. But unfortunately when I bring up the files on the flash drive using the "View as Cover Flow" option in Preview, they show up in the original RAW form - as if I'd just downloaded them off my camera again - without edits.
Many people have mentioned exporting and DNG conversion. With regard to the first: when I select photos, right click, and go to "export to" my only option is "hard drive". Once I select that, nothing appears to happen. No new folders or files seem to appear in my hard drive. With regard to the second: I am nervous about losing information via the DNG conversion. I want to make sure my friend has all the information pertaining to each photo in the event that she needs to do a more significant round of second edits.
How can I achieve this transfer? Also, should the fact that my friend plans on using Lightroom for edits bear any significance on my decisions? Thank you...

The Save as DNG is not in Bridge, It is only available in Camera Raw.
Open your file in ACR, at the lower left click the SAVE IMAGE button. From there you can select several different formats.
Select DNG and adjust the options. You can also embed the original raw file inside the DNG (but gives larger file size)
It's not clear if you are opening the files directly from the flash drive or saving them first to the hard drive.
I would recommend always saving files to the hard drive, eject the flash drive, and then open from there rather than directly from flash drive
We've all had flash drives that go bad or act wonky.
Not trying to work on the files while they still reside on the flash drive is just one less problem to worry about.
Good Luck

How can I use EOS 6D RAW files with Aperture 3.2.4?

Similar Messages

Maybe you are looking for