HOW CAN I USE FACETIME IN MY MAC TO SPEAK WITH MEXICO??

HOW CAN I USE FACETIME IN MY MAC TO SPEAK WITH MEXICO??

where are you located? in some middle eastern countries facetime is blocked by the government.

Similar Messages

  • How can i use FaceTime on my Macbook Pro to iPhone 4?

    Hi,
    i've MacBook Pro (version 10.6.8) and iPhone 4 (version 4.3.5) so how can i use FaceTime on Mac as well iPhone 4 but tried so many times if i try to Facetime call from Mac to iPhone 4 its showing missed call on my iPhone there is no ringing tone try from iphone 4 to Mac same missed Facetime call indicated on Mac's FaceTime so settings also correct i cann't call to both devices so is there any invitation we need to be send to iPhone or Mac? please suggest me.
    Thanks in advance,
    Suresh Balakrishnan

    iOS: Using FaceTime

  • How can i use facetime over wifi on my iphone 4?

    how can i use facetime on wifi on my iphone 4?

    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    iOS: Using FaceTime

  • How can i use isight camera to broadcast to web with Mac OS 10.4?

    I am using an iBook G4 running OS 10.4 as a printer server.  I have to do this to be able to print on my HP DeskJet 882c printer from computers running OS 10.6 and above (although I have not been able to get it to work with 10.8).
    I can connect an iSight camera to the iBook via FireWire.  Can I set that up to broadcast a video feed to a web site so I can visually monitor the area near the laptop and printer?

    jrmnewtonma wrote: How can i use isight camera to broadcast to web with Mac OS 10.4?
    You could use compatible older versions of QuickTime professional extensions for your Mac OS X version.
    This professional quality software is very powerful, and it will certainly stream any video you need.  However, it is not simple to use, so be prepared to do some research and study to get it configured and working.
    To use your iBook with its OS X 10.4, you will need QuickTime Broadcaster 1.5.3 
    and Darwin Streaming Server (v5.5.5) (if you need streaming server functions.) 
    Although I have never used it, QuickTime Streaming Server 4.1.1 might be a useable substitute for Darwin.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • How can I use FaceTime between 2 I-Pads sharing the same email account

    How can I use FaceTime between 2 I-Pads sharing the same email address

    Cstearns-
    I only have one iPad, but was able to add myself to the list of Favorites.  When I tried to call, I was not available!
    You should also take a look at the Skype App for iPhone.  It works on the iPad, where you can choose 2X to expand the display.  I haven't tried to add myself to Skype, but have been able to have it connected on both my computer and the iPad at the same time.
    You might also consider getting a second address from G-Mail, just for use with FaceTime.
    Fred

  • How can i use FaceTime in my iPhone i can't find it on contacts

    how can i use facetime i cant find it in the contacts

    where are you located? in some middle eastern countries facetime is blocked by the government.

  • Hi how can i use imessage from my mac

    hi how can i use imessage from my mac , i tried to text message to one of my contact name but it said the number is not registered with imessage so how can i registered all my contacts to the imessage . thanks

    The person you try to contact has to register his number/his appleID with iMessage.

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • How can I use Aperture 3 on my new iMac with Maverick?

    How can I use Aperture 3 on my new iMac with Maverick?

    Do you own a copy of Aperture, perhaps bought for another Mac?
    If you have not bought Aperture, you need to buy it from the AppStore.
    But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac.  Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac.  Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
    Léonie

  • How can I use Drupal as a third party CMS with ATG E-Commerce Application?

    Hi Friends,
    We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
    Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
    Regards,
    Krishna.

    I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041.  It compares Today to the vacation elig. date and if they match, set a time type indicator to 1.  I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours.  Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage.  In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

  • How can you find out if your mac is infected with the flash back virus

    how can you find out if your mac is infected with the flash back virus?

    F-Secure's Flashback removal tool - http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_k.shtml - supposedly also works on OSX 10.5 and earlier.
    05 Apr 2012 How to Detect and Protect Against Updated Flashback Malware - http://tidbits.com/article/12918 - detection methods for multiple browsers and general information
    Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

  • How can I use my Macbook as a dual monitor with my iMac?

    How can I use my Macbook as a dual monitor with my iMac?

    Then you want to use what's called Target Display Mode.
    iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable
    Target Display Mode And Thunderbolt

  • How can i use facetime in my ipad

    How can I use face time on my iPad?

    Where did you buy the iPad? The UAE government does not allow the use of FaceTime, so iPads bought in the UAE do not have FaceTime and it can't be added when used in another country.
    If you bought the iPad in a country allowing FaceTime, the app will be on the iPad. However, it's possible that if you update the iOS in the UAE, the app may disappear.
     Cheers, Tom

  • How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

    How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac?  There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac?  Thanks ...

    Thanks again!
    Hmmm ... I wonder.  The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it).  When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
    I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones.  I will certainly try your solution - what do I have to lose?  If they don't work, then I get new ones - or try something else.
    Many thanks for your time!

  • How can I use the media Buttons on my M40X with WinAmp?

    Hello
    Today I got my M40X and i have a question.
    There are 5 media Button left of the keybord (CD/DVD, Play/pause, Stop, <-/->)
    Is it possible to use them with WinAmp?
    In the Toshiba Assist i got the CD/DVD button used to start WinAmp (by use him to start a .exe) but the Play/pause...dont work. In the field media Apps the only Player i can choose is Win MP10 (I hate this piece of sh*t).
    How can I use these Button with WinAmp?

    Hello
    As far as I know the Toshiba Controls were tested and designed only for Microsoft Media Player and WinDVD. How this topic says:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3621&messageID=11461#11461
    I dont have any experience with WinAmp but I found useful info in this forum about this theme:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6673&messageID=24448#24448
    Check this.
    Bye

Maybe you are looking for

  • Mic problem wiv x

    i have the fatality fps sound card. my problem is wiv the mic jack at the rear of the card. i need to use this instead of the one on the front panel as when playing battlefield 2 it defaults to the connection on the back of the card. however i need t

  • Why does my mouse pointer have a "no" symbol attached?

    My mouse pointer has the   symbol attached. I can move the pointer, but it does not do anything. It's like it is frozen.

  • How do I gift a book from ibooks?

    How do I gift a book from ibooks?

  • Help please: How to create  a frame? (not as you think)

    You probably know lots of sites are built with frames, and I do not mean the normal frame in flash, I mean a frame to another URL. I was wondering, can I create such frame in a flash file? Thank you, Gal. Please replay if you did not understand somet

  • Oracle 9 table names are not case sensitive

    Sorry about the trivial question, but I noticed that when I am creating table in Oracle their names is always upper case. Example: CREATE TABLE MyTable (i NUMBER(5)) CREATE TABLE MYTable (i NUMBER(5)) CREATE TABLE MyTABLE (i NUMBER(5)) CREATE TABLE M