How can I use footage shot with a phone app?

I have shot footage on my phone using a filtered app called Majicam.  When I play it in premiere it plays as a green screen. Do I need to alter something about the footage in order for Premiere to recognise it? Please help.

hi there.  when i converted the file to mp4 it worked.  so thanks for that!!  bit of a pain to have to do that with so much of my footage tho.  maybe i should change my app. 
just one more question if you have the time. im new to premiere. my source monitor doesnt always play in real time.  it stops and starts a bit.  i have 2G ram macbook.  any idea why it might be happening?
thanks so much again

Similar Messages

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • How can i use "icloud backup" with ios 4.2.1?

    How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

    You cannot.
    It requires ios 5.
    Your iphone can only go to 4.2.1

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

    Hi!
    I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
    Then I import it into OSB and make it work and the service works normally in the single node.
    But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
    So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
    Thank you!

    Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

  • How can i use MS word with MAVERICK

    how can i use MS word with MAVERICK?  None of the MS Office applications work with new IOS!!!

    What version of Microsoft Office Mac are you running?  You probably just need to update it to the latest release:
    http://www.microsoft.com/mac/downloads?pid=Mactopia_Office2011
    Office 2011 Mac's latest version is 14.3.8 for instance.

  • How can one use Mission Control with two monitors?  Please bring Spaces back

    How can one use Mission Control with two monitors.  With Spaces I could treat each space as a single desktop.
    SyBB

    I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
    Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

  • How can I use Local SPAN with RSPAN ??

    How can I use Local SPAN with RSPAN ??
    I want to mirror traffics from ISP-A and ISP-B to Anomaly-detector module.
    so I had configured like this...
    C6500-A
    vlan 1000
    name RSPAN
    remote-span
    monitor session 10 source interface Gi5/1 - 2 rx
    monitor session 10 destination remote vlan 1000
    monitor session 20 destination anomaly-detector-module 3 data-port 1
    monitor session 20 source remote vlan 1000
    interface GigabitEthernet1/13
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1000
    switchport mode trunk
    no ip address
    C6500-B
    vlan 1000
    name RSPAN
    remote-span
    monitor session 10 source interface Gi5/1 - 2 rx
    monitor session 10 destination remote vlan 1000
    interface GigabitEthernet1/13
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1000
    switchport mode trunk
    no ip address
    end
    but it was not working..
    it wasn't any change of input packet hit count when
    I'd enter a command 'show anomaly-detector module 3 data-port 1 traffic'
    was upper configuration wrong..?
    Can I use VACL configuration ?

    try to change "monitor session 10 destination remote vlan 1000 " to "monitor session 10 destination anomaly-detector-module 3 data-port 1 " on C6500-A

  • How can i use jpg extension with forms 10g and webutil

    I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
    image jpg and image item has no jpg extension .
    How can i use jpg extension with forms 10g and webutil ?

    You can use the JFIF image format for jpg files.

  • How can i use 3D Features with 256 VRAM

    How can i use 3D Features with 256 VRAM

    Well, in theory you *could* install Photoshop CS6 version 13.0 and not update it.
    Is your video card replaceable?  They don't cost that much.
    -Noel

  • How Can i use Html frames with  simple JSP???

    How Can i use Html frames with simple JSP???
    Actually i am creating an application in which i have used Index.html as frame.
    Noew i am trying that if i click on a link of one frame(say menu frame) the \result shoul come to some other frame(say frame named mainwindow).
    Hoe can i do like this???
    Anand Pritam

    Well i am using..
    < Base target="mainwindow">
    But it is no working is there some other way??

  • How can I use the ScrollTablePane with kodo ?

    How can I use the ScrollTablePane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.

    Marco-
    I am not familiar with any "TableScrollPane" classes. Can you clarify
    whether this is some 3rd party custom component, or something you have
    written?
    Note that we do not provide any pre-build graphical data components with
    Kodo, but we do intend to provide some examples in the future.
    In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
    >
    How can I use the TableScrollPane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.--
    Marc Prud'hommeaux
    SolarMetric Inc.

  • How can I use the TableScrollPane with kodo

    How can I use the TableScrollPane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.

    Marco-
    I am not familiar with any "TableScrollPane" classes. Can you clarify
    whether this is some 3rd party custom component, or something you have
    written?
    Note that we do not provide any pre-build graphical data components with
    Kodo, but we do intend to provide some examples in the future.
    In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
    >
    How can I use the TableScrollPane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.--
    Marc Prud'hommeaux
    SolarMetric Inc.

  • How can i use iTunes 10 with my ipad that has ios7

    how can i use iTunes 10 with my ipad that has ios7

    jpbblues wrote:
    how can i use iTunes 10 with my ipad that has ios7
    You cannot. You need iTunes version 11 for iOS 7.
    iTunes free download from www.itunes.com/download

Maybe you are looking for

  • How do I transfer an itunes card from an old apple id to my new apple id?

    I recently had to update my apple id and password because I no longer have that account. I had an itunes card on the old apple id and after changing my id it's not there anymore...can I transfer this? Does this also affect my purchases?

  • Windows Mail App: Links appearing as plain text.

    Some of my emails are not properly displaying web links through my Yahoo account.  For example:  I am personally subscribed to a website known as Slickdeals (http://slickdeals.net), and none of their Deal Notifications have active links within the Ma

  • Poriblems with Server Side Include

    I amtrying to convert to Spry Menus using SSI. into a template.  been beating my head against the wall on what can go in and what can't in an include fil but that turns out not be my big problem when in using Dredamweaver CS5   and  do a server side

  • Random Lync Phone Edition Disconnections - Sometimes does not sign back in

    We recently had a user who reported that his Lync Phone (Polycom CX600) was signed out when he came in first thing in the morning and it was sitting at a sign-in error page.  The phone then was having problems signing in.  We had to factory reset the

  • 7.0.1 Updater install problem

    Hi We are running CF MX 7.0.0.91690 on a MS Windows 2000 SP4 Server, and am having problems installing the 7.0.1 Updater. A few seconds after double clicking on the Updater the install process stops with no error message. Has anyone else had the same