How can i use IDSM-2 in inline mode for more than two VLANs?

can i use the IDSM-2 in inline mode to be ips to more than two VLANS
like this or it isn't
intrusion-detection module 5 data port 1 access-vlan 10,20,30,40,50
intrusion-detection module 5 data port 1 access-vlan 100,200
thank u all for your help

The IDSM-2 ports need to be configured as trunk ports with multiple vlans rather than as access ports.
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517eb.html#wp1068377
And instead of creating an inline interface pair by pairing Gig0/7 with Gig0/8 within the IDSM-2 configuration, you would create inline vlan pairs.
With an inline vlan pair you pair 2 vlans on the same interface.
You can have up to 255 inline vlan pairs on each interface (assumining you keep the total traffic from all of the pairs within the IDSM-2s performance limit of around 500Mbps)
How to create inline vlan pairs:
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517bb.html#wp1047852
The other aspect you need to be aware of is that not all IOS versions will support configuring the IDSM-2 data ports as trunk ports for inline vlan pairs.
Your best bet is to use 12.2(18)SXF4 or a later version on the 12.2(18)SXF train.
The 12.2(33)SR train does not currently support the trunk feature for the IDSM-2.

Similar Messages

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

Can I make a DVD that will go for more than two hours?

Hi,
I'm working in iDVD 08, version 7.0.1, and when I drop in video that lasts over an hour, I get a warning. The original videos are around 100 MB for each hour, and iDVD won't let me add more than two. It's saying my two 100 MB videos will fill the 4.2 GB of space on the DVD.
What can I do to have the videos stay at around 100 MB each, so I can put several of them on one DVD?
Any help is most appreciated.
Russ Conte

Russ,
iDVD isn't really designed to archive old highly compressed movie files.
DV video (for which iDVD was originally designed) runs about 13 GB per hour and iDVD mpg-2 compresses everything to fit a maximum of 120 minutes on a single-layer disc. (Your files are much more highly compressed than DV and perhaps are also smaller in image size.)
If you want to 'cram' a lot more content on a DVD (and don't care about the quality) you might want to look at VisualHub that claims to let you put up to 18 hours of content on a disc.
F Shippey

How can I use bridge to create web galleries with more than 10 images?

I am new to building web galleris for my website. When i try to load more than 10 images in a gallery , Bridge cuts off all images beyond 10. I am confident that I can do this if i can find the right settings

I am not at my PS computer right now, but I think the Preview only shows 10 images (for speed) but they will all be there in the final output.

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

How can I use my IPAD as a wifi for my IPHONE? Is that possible, How can I use my IPAD as a wifi for my IPHONE? Is that possible

Is there a reason you can't connect your iPhone to the same Wi-Fi network as your iPad?

How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

cd,
Insert the picture and position it as you desire
Make sure the picture is set to Floating in the Wrap Inspector
Arrange > Send Objects to Background
Regards,

How can i use the amp designer or pedalboard for software instruments in garageband 10

how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?

hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x

HT1386 how can i use my itunes music as ringtones for my contacts

how can i use my itunes music as ringtones for my contacts. I have a ton of music in my Itunes library, but cannot figure out how to set up my ringtones for my contacts.

http://techtips.salon.com/use-itunes-music-ringtones-iphone-3547.html

How can I get a E3000 or E4200 to manage more than 5 devices

How can I get a E3000 or E4200 to manage more than 5 devices? Come on Cisco, lets get real. EVERYONE has more than 5 devices to manage. The average family of 4 has 3 or 4 computers, 4 smart phones and at least a couple of tablets and maybe some TV or game consoles. Setting access control policies is a must for anyone who is a parent.
Does anyone know of a good router that has a reasonable set of access control features? I've always loved Cisco up to this point, but I'm frustrated by this significant limitation.

Fuggedaboutit. Cisco apparently has retreated from the more advanced Internet Access Policy (IAP) to leave users with their paltry Parental Controls (PC) instead. For example the E4200v1 had IAP+PC, and the E4200v2 has only PC.
And good luck trying to find a E4200v1. I spent the last week, ordered 3 of them from different sources, and every one of them was a V2 inside of a V1 box, even the last one I ordered directly from Linksys!
That's a very bizarre marketing scam they're pulling there. The sad thing is that I actually want to keep using their product line, but they are doing their best to push me away.
I too am now regrouping and looking for a competitor who does 2 things well:
(A) High performing dual-band wireless access point, w/ pswd-protected guest-mode
(B) Reliable & fairly full-featured Internet access control (parental control)
My basic requirements for "B" are:
(1) Allow restrictions by IP or better yet MAC address (Cisco PC's hostname list didn't work for me)
(2) Device list of at least 12 devices (obviously family size varies but Cisco's 5 is a joke)
(3) Restricty by days of week and time of day (hourly or half-hourly would be nice)
(4) Restrict by URL's and keywords, at least 12 per device or policy/rule
I wonder if there's a home router whose stock OS, meets these requirements. Otherwise I may have to look into using DD-WRT or similar.

How can I set up my mail page to show more than ten emails at a time?

How can I set up my mail page to show more than ten emails a time?
== This happened ==
Every time Firefox opened
== I first started using firefox

There doesn't seem to be a setting in preferences to how many emails I can view at one time.

HT201318 can you use a itunes card to pay for more storage for the cloud

I was wondering can you use an Itunes card to pay for more icloud space.

No. iTunes Store only.
"An iTunes Gift Card lets you shop for anything at the iTunes Store " > http://store.apple.com/us/browse/home/giftcards/itunes/gallery

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
200

How can i use exisitng user data(Id, password) for user mapping

Hi All,
For User mapping , we can import user mapping data for many users from user administration. and for each user
we can maintain mapping data in the standard format.
eg:
[User]
uid=user2
$usermapping$:BCE:user=ext_user2
$usermapping$:BCE:mappedpassword=password
i am clear till this point.
this all works if we know the userid and passowrd on the system 'BCE'.the passwords on the system 'BCE', are encrypted . so there is no chance for me to know the passwords.
so how can i use the existed userid/passowrd on the system 'BCE' for the mapped user and mapped password on the portal while doing usermapping.
Thanks in Advance,
Lakshmi

Hi,
I think this should work.
1. Setup SSO with SAP logon tickets first. How to do this is described many places, e.g. http://help.sap.com/saphelp_nw04/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
This SSO will not work at first, because the username is different in the back-end system. So what you need to do is to get the back-end username into the ticket (don't need a password because that is done by the SAP logon ticket)
2. Create a portal component which uses the usermanagement API to create a usermapping which only consists of the username and a blank password. You can do this manually I think if you have no reference system defined.
IUserMappingService umap =(IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
//this is the currently logged in user. You might another user
IUserContext user = request.getUser();
//Get the existing data (think it can be null)
IUserMappingData userMapping=umap.getMappingData(systemAlias, user);
HashMap map = new HashMap();
                         map.put(IUserMappingService.UMAP_KEY_USER, backEndUserName);
//add blank password               map.put(IUserMappingService.UMAP_KEY_PASSWORD, "");
//store the values                    userMapping.storeLogonData(map);
Voila, this should allow you to do SSO using SAP logon tickets, but with another name that you use against the portal. I am uncertain if this will work if you have multiple usermappings in the sap logon ticket
PS since the sap logon ticket is issued at logon time, you need to relogon to get the changes done by the code
Regards
Dagfinn

How to close open POs which are open for more than two month

I am new to MM please somebody help me with this
Thank you

there is NO STD SAP program which will help u closing the open PO (more than two months)
you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
Another way to set the final invoice indicator in invoice tab
system will allow you to post the further invoices but all be blocked.
somebody need to go and verify the blocked invoices and take necessary action
This is again a manual activity, there is no such STD setting or T code exist
Another way is you can create a program with the help of abaper
built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
hope this will help you

How can i use IDSM-2 in inline mode for more than two VLANs?

Similar Messages

Maybe you are looking for