How can I use international data on a prepaid sim (not vzw roaming) with the Galaxy s3?

This has been incredibly frustrating.  I am in the middle of a trip to Europe.  Before I left, I confirmed with VZW CSR's that my s3 LTE phone is fully unlocked and that I could buy a local sim and use it while in Austria.
Aside -- I can't use VZW global services on their network -- cost notwithstanding -- because I  hit some device limit when I bought my wife an iPad, and VZW required a deposit for it.  No big deal, EXCEPT that here three months later I learn that VZW accounting prohibits global roaming if you account has a deposit.  So fine, VZW doesn't want me to pay them a dollar a minute and $20/100MB.  No problem, I can get a drei (3) prepaid card for 10 euros that has 1000 minutes and 2 GB of data.
So, I do.  I activate the card, and voice and sms work fine.  No data.  No joy.
Step 1.  I call samsung.  Samsung, after about an hour of claiming it should work, decides that it is because VZW has some sort of software block.  Not surprising, since the software is actually from VZW.
Step 2.  Call VZW.  After a great deal of ****  VZW says you have to go back to the drei store.
Step 3.  Return to drei.  Store rep discovers VZW software will not recognize their access point name (APN), and will not let you enter it.  They verify on a different s3 that the sim is fine.  With my VZW sim, I can see the VZW APN's, but because I don't have global services turned on, no joy.
Step 4.  Do some web digging.  Discover that this APN thing is a known bug.  Web sites (like the CSR in the transcript) suggest rooting or jailbreaking is the only workaround -- which I don't want to do.  But here I sit in Austria, with no data on a top of the line VZW phone and an account with seven different lines. 
So, how do I resolve this?  Take the phone back, because there is clearly a defect?  But if it's software, I'll have to get an escalation to get a different phone.  Is there a fix?  Sue for false advertising?  Better yet, start a class action -- there sure seem to be a lot of us in this boat based on web searches.
<< Transcript removed to comply with Verizon Wireless Terms of Service >>
Message was edited by: Verizon Moderator

OK, I have to throw VZW some props here.  I went to the store where I bought my phones, and explained the problem I was having with international travel and the s3.  The store put me into an iphone5 for free as a warranty exchange -- apparently they know the APN issue is a serious one and they said there was a big lawsuit about it.  It cost me a bit for power adapters and such, and a few paid apps, but the iphone has (reportedly) no issues with international travel and local sims.
Way to go, VZW. Mark this one up for responsive customer service.

Similar Messages

  • HT1338 How can i use my data on windows or mac when i use one of them in the same time?

    Hi,
    i have a Mac book with 2 operating system, ( Windows& mac). How can i use my data on windows or mac when i use one of them in the same time?
    Thank you

    The following article(s) may help you.
    Resolving duplicate calendars
    Resolving duplicate contacts

  • HT204053 How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

    How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

    You cannot delete the account from the server (partly to prevent the username from becoming available again and some-one else using it to pretend to be you).. Having disengaged your devices from it, go to http://icloud.com and delete any data in there such as contacts and calendars. Then just ignore it.

  • How can I use dns-sd to set up a priner to work with AirPrint?

    How can I use dns-sd to set up a priner to work with AirPrint?
    The priner is an HP LaserJet 1200 connected to the network with an HP JetDirect.

    Some of the third-party apps like "handyPrint" are able to configre the HP JetDirect to work with AirPrint.
    I am trying to work up my own solution.
    SyBB

  • Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?, Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?

    Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?, Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?

    If there is no iTunes Store in your Country... Then there is no iTunes Store you can use...
    iTunes Store: Which types of items can I buy in my country?

  • How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ?  iDVD Manuals that I have read seem to avoid explaining that export process.  Any advice will be greatly appreciate

    How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ?  iDVD Manuals that I have read seem to avoid explaining that export process. I'm using Aperture 3, Mac OS X (10.7.5), on a Any advice will be greatly appreciated.  Anthony Zasadney, Bolingbrook IL.

    Export the slideshow from Aperture as a .mov file and import it into iDVD.

  • How can I change my iphone username to update apps and download anything with the new email I have today?

    how can I change my iphone username to update apps and download anything with the new email I have today?

    Before you make an apple ID with the new email, go to appleid.apple.com.  login with your old email and password. change your old email to your new one. Now you can use your new email as your apple id, but beware if you go through the process of creating a new appleid with your new email address you will not be able to attach your old account to your new email.

  • HT1386 My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    You need to update to 10.6.8 using Software Update.

  • How can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS?

    how can i get my logic3 istation (ip106) to charge my ipod 4gen with the latest iOS? i had recently bought it for my ipod to play and charge my ipod

    Is it compatible with iOS 5.0.1? Some users have reported that after updating to iOS 5/5.0.1 their dock no longer worked.
    Have you contacted the manufactuer?

  • How can i active my i phone on other sim card didnot come with and in anther country

    how can i active my i phone on other sim card didnot come with and in anther country

    It will not work with an egyptian SIM unless it is first unlocked first by Vodafone UK. Only Vodafone UK can unlock your phone. Contact them.

  • How can I use MY data in the GLV_GigaLabVIEWMemoryStoreAndBrowse.vi?

    Hello everyone,
    As I use large data files (500MB) and need to be able to view them in graphs, I was reading this arcticle about Managing Large Data Sets, and found the GLV_GigaLabVIEWMemoryStoreAndBrowse.vi example in the "Fast Data Display with Decimation" section of it. It is exactly what I need, but, of course, with my data... So, how could I rearrange this file to be able to see not it's own data, but the data I acquired with the TDMS Writer (1D array of waveform data)?
    Thanks,
    Rafael

    There are several options, but I would recommend using the already existing file as your data buffer.  This will replace the internal data structures (queue or functional global) for the main data, not the decimated preview.  I would do it as follows:
    Replace the number of points front panel control with a path control called Filename.  This will allow you to specify your file.
    Modify the command enum so Change NPoints is Change Filename (only needed for us humans).
    In the Value Change event (top loop) for Filename (create one if it is not already there, delete the nPoints one if it is still there), stuff the command queue with Change Filename.
    Create a local shift register in the bottom task handler loop (similar to the one in the traditional memory store and browse) to hold your file reference.
    In the Change Filename frame of the task handler, close the file reference (if it is valid) and open a new file reference using the TDMS functions (use the file name terminal to read the file name).
    Replace all instances of reading or generating the main data with the corresponding TDMS function using the new file reference.  For example, in the Change Filename case, replace the Sine Wave.vi with a TDMS Read.vi which reads the corresponding subset.  Make your chunk size 65,000 points for best speed.
    I have never done this with TDMS (only because I stopped working with file I/O before TDMS was invented), but have done it with raw binary, NI-HWS, and HDF5.  All worked well, so you should have no problems.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • How Can One use XML data into our Java Program

    I have an Java Program and an XML file contaning data. I want to parse the xml data and use into my Java Program. How can I do so.

    Check out the org.xml.sax.XMLReader class.

  • How can I use my Treo 700wx thru Verizon to connect my laptop to the internet?

    I've seen many people do this.  Do I need a special cord? How can I make this happen rather quickly?  I'm leaving in a few hours for a road trip and would like to be able to make this happen.  What kind of set up is involved on the phone?  I currently have an unlimited data plan on my account thru Verizon.
    Thanks in advance for any help and advice you can give.
    DT. 
    Post relates to: Treo 700wx (Verizon)

    Hello, I wanted to let you know there is a Support Base Article about this.  You can find it by going to kb.palm.com and searching for article number:  44981.
    This article will tell you everything you need for it and how to do it.
    This article is also specific to Verizion

  • How can I use my computer as a Headset device for my phone with Bluetooth?

    Hello, Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP, even though it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer. I am currently using the latest version of the Toshiba stack [v8.00.12(T)], I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not seem to communicate with my internal and external (USB) Bluetooth. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Attached: Device type selection
    Attachments:
    Untitled.jpg ‏120 KB

    It's not possible. You can use the iMac as a display for the MBP,  but the reverse is not possible. The MBP does not have Target Display Mode as a feature and no third-party app nor hack can enable something that doesn't exist. The only way to accomplish this will be one of the network solutions.
    Regards.

  • How can I use JSF 1.2 components in NetBeans 5.5.1 with VWP

    I need to use requiredMessage and converterMessage, but they are available in JSF 1.2. How can I create a Visual Web Application Project which uses JSF 1.2?
    Thanks

    i tis due to version compatablity prob,,
    ur wsad will not support struts1.2.4..
    regards
    shanu

Maybe you are looking for

  • Can't open Dawsonera protected file on latest version of Adobe

    Everytime I try it says 'An error occurred while performing the operation. Contact and administrator if the problem persists' I tried uninstalling it and reinstalling it but to no avail. Please help as I need to look at this ebook for coursework.

  • Looking for an insert statement to insert into a table around 500 rows

    Hi  Gurus, Your help is greatly appreciated !!, I need to have a query to insert into the mer_spec_feature table with the following , Please sugesst apart from the Utl_file ,input thing as the data is differnt in the regions and am lokking if it work

  • How to sort data in Matrix report

    I've used Report6i and create report in Matrix format.I want the report to display data in sorting by data in cell. Anyone pls help me. --it's show this applicant_id/score Score 08002 400 08003 200 08004 700 08006 653 08008 560 08010 800 -- but i wan

  • CPU alert w/ Firefox - computer slowing, stalling - why? fix?

    Am getting Alert - high CPU usage generated by FireFox - system slowing down, stalling. Is there a quick fix? HELP

  • Best procedure to avoid phishing

    Accessing certain sites like banks and others vulnerable to phishing, which are the best and correct steps to take to avoid it ? Just clearing cache is enough ? I noticed that the famous lock showing a secure site is not shown in my Safari pages ? Ho