How can i use JMSProducerStats interface
hello,
every application server implements the interfaces of javax.management.j2ee.statistics , how can i get the results of the methods given by those interfaces (such asJMSProducerStats ) on the runtime of the as.
Thank you.
You can access devices connected to the USB port, but not in the same way as you would a GPIB or RS232 device. There are no USB drivers like there is VISA for GPIB or serial. Rather devices that plug into the USB appear to the systen as some sort of standard resource like a printer, disk drive or IO board. LabVIEW then interacts with these devices as it would any other device of the same type.Look at it this way, if you have a USB daq device you will access it through MAX the same as if it were a plugin card. Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Similar Messages
-
How can I use USB interface in Labview?
Hi.
Does labview allow to USB interface?
I have been seen allowing GPIB and RS232.
I'm beginer at Labview and wanna use USB interface for my target system and pc.
I wanna know how to labview interfaces from target system to pc.
And if Labview doesn't provide USB interface module, how can I use USB?
Is using a USB at Labview hard to beginer?
Plz, answer to my quetion.
sorry, my English is very poor.
thx for reading my article.You can access devices connected to the USB port, but not in the same way as you would a GPIB or RS232 device. There are no USB drivers like there is VISA for GPIB or serial. Rather devices that plug into the USB appear to the systen as some sort of standard resource like a printer, disk drive or IO board. LabVIEW then interacts with these devices as it would any other device of the same type.Look at it this way, if you have a USB daq device you will access it through MAX the same as if it were a plugin card. Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
How can I use the color adjustments interface that shows up for camera RAW on jpeg files?
How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?
Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.
-
How can I use XMLBeans in a Web Services client?
How can I use XMLBeans in a standalone Java client with a Web Service?
I posted the message below earlier in the year, but have not yet been successful
in my
attempts.
regards
Eddie
Hi,
I'm trying to using XMLBeans to send a document to a web service from a standalone
Java client. I'm using the PurchaseOrder (easypo) example document, and the service
expects a parameter of type PurchaseOrderDocument. The client proxy class generated
by WebLogic Workshop, however, expects to send a parameter of type PurchaseOrder.
In the client, I can instantiate a PurchaseOrderDocument, and then obtain a PurchaseOrder
(e.g. pod.getPurchaseOrder() ), but the returned class is not compatible with
the PurchaseOrder type that the client proxy expects.
In a previous attempt (not using Workshop), the client would not compile because
it expected to send a non-abstract class with a public default constructor (presumably
a JAX-RPC requirement), and XMLBeans had generated an interface.
Any help would be greatly appreciated!
thanks & regards
EddieI have been experiencing similar problems with the HTML Editor and have managed to find an answer that should start to answer some of my questions. The Apex HTML Editor Standard is actually an HTML editor called FCKeditor. The FCKeditor has a Javascript API that can be found at http://docs.fckeditor.net/FCKeditor_2.x/Developers_Guide/JavaScript_API. Unfortuately this doesn't seem to give the whole answer and I found more at http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:49607.
I needed to get the text entered within my html editor standard (e.g. P1_MYTEXT) and use it within my javascript function. I did this by using the following script
<script language="JavaScript" type="text/javascript">
function showtext(){
var oEditor = FCKeditorAPI.GetInstance('P1_MYTEXT');
var editortext = escape(oEditor.GetXHTML(oEditor.FormatOutput));
alert(editortext);
</script>
Hope this helps.
Matthew -
HT4976 how can I use emoji keyboard on iPhone 3GS????
how can I use emoji keyboard on iPhone 3GS In wts app nd version ov this is 5.1.1(9B206)????????
Once the keyboard is connected, it should work with any app that uses the standard keyboard interface, so it will work with iWork.
br121: iWork was released for iPad quite some time ago, and updated for iPhone 4 recently.
Pages - http://itunes.apple.com/us/app/pages/id361309726?mt=8
Keynote - http://itunes.apple.com/us/app/keynote/id361285480?mt=8
Numbers - http://itunes.apple.com/us/app/numbers/id361304891?mt=8 -
How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.
How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
JorgeHi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni -
Can i use one interface to load data into 2 different tables
Hi Folks,
Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
Please give me advice
Thanks
Raj
Edited by: user11410176 on Oct 21, 2009 9:55 AMHi Lucky,
Thanks for your reply,
What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
can i load this source data into two staging tables by using single standard interface(some business logic is there)
If i can then give me some suggestion how to do that
Thanks in advance
Raj -
How can I use the versionning tool to make a coherent solution to export
how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjeekelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it. -
How can I use regular expression to open files of certain types in java?
Ok this is the problem I am facing:
I have a command line input of something like "/usr/foo/bar/*.html"
and there are multiple files in that folder that end with .html.
How can I use the input to go through/open all the .html files in Java?
Help would be greatly appreciated thanks!Or if you have to do it in java, check out the interfaces java.io.FileFilter and java.io.FileNameFilter
http://home.tiscali.nl/~bmc88/java/sbook/0128.html
class HTMLFilter implements FilenameFilter {
public boolean accept(File dir, String name) {
return (name.endsWith(".html"));
}Cheers,
evnafets -
I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?
If I recall, CTRL-D is EOF on most ASCII tables.
You'd probably have to use an escape sequence
or if you can use an unsigned 8-bit that might be
easier.
In article <[email protected]>, TLS
wrote:
> How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
> format) out the serial port of my computer?
>
> I am trying to write a vi that interfaces with a piece of OEM
> equipment that is set up to talk with a VT 100 terminal. I can't seem
> to locate the ASCII equivalent string (if there is such a thing) of a
> CTRL D. Is there a vi that emulates VT 100 commands? -
How can I use system call in kernel loadable module?
Hi,
I want to use system call (shmat, mmap,...) in kernel module.
When kernel module is loaded, it cause system error (undefined symbol name 'shmat', 'mmap').
How can I use system call in kernel module ?
Thanks in advance.
david jooYou cannot use system calls in the kernel modules.
Read 'Writing Device Drivers' answerbook - it lists the set of interfaces (known as DDI/DDK) that are supposed to be used instead.
Hope this helps...
--I. -
How can we use business object (e.g. crystal report ) in webdynpro abap
Hi All,
We all know that business object has been part of sap products.
But even though in SAP, I really don't know much about business object.
and how can we use the great function of BO and integrate into our development to make
user have much better function and user experience.
Do we have some learning material of BO?
Could someone share some material here?
Thanks and Regards
Aaron.One of the main ways that you can integrate some Business Objects content with WDA is via FlashIslands. If you are on 7.01 or higher, you have the option to use FlashIslands UI element. There are many tutorials on FlashIslands available on SDN. FlashIslands work well with Xcelsius content, since the output of Xcelsius is a Flex component. It is pretty easy to set the Xcelsius interface to External Connection and then write a wrapper Flex Component around the generated output, so that it can be used in the FlashIslands interface.
For Crystal Reports integration you will need NetWeaver 7.02 (comming early next year). We have integrated Crystal Reports as an output option in the Web Dynpro ABAP ALV and the Classic Dynpro ALV. You don't need to do any development to enable this. You can use two different SAP delivered Crystal Reports templates for the ALV output, or create and add your own templates.
Some of ther BOBJ integration is still in prototype and demo phase within SAP. For instance we have a data interface to send data to Explorer onDemand from any ABAP application. We have a prototype FlashIsland for WebI to run in place within Web Dynpro ABAP. Over future enhancement packages you will see increased integration opportunties with the BOBJ capabilites. -
How can I use Local SPAN with RSPAN ??
How can I use Local SPAN with RSPAN ??
I want to mirror traffics from ISP-A and ISP-B to Anomaly-detector module.
so I had configured like this...
C6500-A
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
monitor session 20 destination anomaly-detector-module 3 data-port 1
monitor session 20 source remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
C6500-B
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
end
but it was not working..
it wasn't any change of input packet hit count when
I'd enter a command 'show anomaly-detector module 3 data-port 1 traffic'
was upper configuration wrong..?
Can I use VACL configuration ?try to change "monitor session 10 destination remote vlan 1000 " to "monitor session 10 destination anomaly-detector-module 3 data-port 1 " on C6500-A
-
About note and how can be used?
Hi guru's
Application area
Causing note
Note text
Note version(s)
In Support Package
Note Version
Application area
Solving Note
Note text
Note Version
Priority
PM
1702698
Call horizon in days - Correction interface
0001 to 9999
SAPKH60022
1
PM-PRM-MP
1953397
IP17 : dump when processing big amount of data
1
Correction with medium priority
PM-PRM-MP
1789684
Mismatch between setlement rule and planning plant
0001 to 9999
SAPKH60023
1
PM-PRM-MP
1953997
Message IP343 is raised incorrectly
1
Correction with medium priority
PM-PRM-TL
1618758
IA10, IA17: Wrong data is displayed
0001 to 9999
SAPKH60021
2
PM-PRM-TL
1967534
IA10: Performance problem when lot of tasklists are processed in Diaplay Multi-level tasklist
1
Correction with medium priority
PM-PRM-TL
1665112
Enhancing the call horizon - interface note
0001 to 9999
SAPKH60022
1
PM-PRM-MP
1890025
Call horizon in days - change documents are missing
1
Correction with medium priority
PM-PRM-TL
1804473
IA17: Long text truncated when printing task lists
0001 to 9999
SAPKH60024
3
LO-MD-MM
1832789
DIMP: Follow up note 1804473
1
Correction with high priority
PM-PRM-TL
1808918
IP16 doesn't select all maintenance plans
0001 to 9999
SAPKH60024
1
PM-PRM-MP
1953397
IP17 : dump when processing big amount of data
1
Correction with medium priority
PM-PRM-TL
1811570
IP16 doesn't select all maintenance plans (interface note)
0001 to 9999
SAPKH60024
2
PM-PRM-MP
1953397
IP17 : dump when processing big amount of data
1
Correction with medium priority
PM-WOC
1759689
Header long text line length - missing text IW3x
0001 to 9999
SAPKH60023
2
PM-WOC-MO
1875327
Short text corrupted when long text contains special char.
1
Correction with medium priority
PM-WOC-LE
1664071
IW38/IW39: Estimated Costs are displayed incorrectly
0001 to 9999
SAPKH60021
2
PM-WOC-MO
1678480
Syntax error in Enhancement /OLC/SAPLICO1_OLC
1
Correction with medium priority
PM-WOC-LE
1812697
IW37N: Release of an order doesn't change operation status
0001 to 9999
SAPKGPAD23
1
PM-WOC-LE
1958073
Changes to the list transactions IW37N and IW38 - 2
1
Correction with medium priority
PM-WOC-LE
1812697
IW37N: Release of an order doesn't change operation status
0001 to 9999
SAPKGPAD23
1
PM-WOC-LE
1957961
Changes to the list transactions IW37N and IW38 - 1
1
Correction with medium priority
PM-WOC-LE
1822976
IW37N: Header fields of the order are not updated
0001 to 9999
SAPKGPAD24
2
PM-WOC-LE
1957961
Changes to the list transactions IW37N and IW38 - 1
1
Correction with medium priority
PM-WOC-LE
1822976
IW37N: Header fields of the order are not updated
0001 to 9999
SAPKGPAD24
2
PM-WOC-LE
1958073
Changes to the list transactions IW37N and IW38 - 2
1
Correction with medium priority
PM-WOC-LE
1822976
IW37N: Header fields of the order are not updated
0001 to 9999
SAPKGPAD24
2
PM-WOC-LE
1877495
IW37N: Changing multiple orders does not work
1
Correction with medium priority
PM-WOC-MN
1569664
Action box in a PM/CS notification is not called correctly
0001 to 9999
SAPKH60021
2
PM-WOC-MN
2019716
Fehler bei Meldungsanlage über Folgeaktion zur Maßnahme
1
Correction with medium priority
PM-WOC-MN
1756952
Maintenance view T355E_W: Runtime error RAISE_EXCEPTION
0001 to 9999
SAPKH60023
2
PM-WOC-MN
1908372
Define Response Profile: Error message SV 033
1
Correction with medium priority
PM-WOC-MO
1694834
Correction: "Document assignments for maintenance order"
0001 to 9999
SAPKH60022
1
PM-WOC-MO
1775663
Maintenance order screen sizes
5
Correction with high priority
PM-WOC-MO
1695763
Missing object lists, dump for notif. creation from order
0001 to 9999
SAPKH60022
7
PM-WOC-LE
1741839
IW37N: Revision level not updated automatically in the list
1
Correction with medium priority
PM-WOC-MO
1733309
Runtime error in IBAPI_ALM_ORDER_POST
0001 to 9999
SAPKGPAD22
2
PM-WOC-MO
2011849
IBAPI_ALM_ORDER_POST löscht Meldungsvariablen, die in BAdI WORKORDER_UPDATE gesetzt wurden
1
Correction with medium priority
PM-WOC-MO
1773410
Basic Order View: Cost element is not filled for an ext oper
0001 to 9999
SAPKGPAD24
2
PM-WOC-MO
1971482
Basic order view operation detail: Error message IW 113
1
Correction with high priority
PM-WOC-MO
1817536
BUS2007 and BUS2088: Attribute Notification not supplied
0001 to 9999
SAPKH60024
1
PM-WOC
1901669
BUS2007/BUS2088: Notification attribute is not supplied
1
Correction with high priority
PM-WOC-MO
1818999
IW32: Environment display for field RESBD-POSNR impossible
0001 to 9999
SAPKGPAD24
2
PM-WOC-MO
1931707
Some buttons not working in the component overview
1
Correction with high priority
PM-WOC-MO
1819505
IW32: No check on WBS element and network activity in order
0001 to 9999
SAPKH60024
2
PM-WOC-MO
2005929
EAM order: Assignment of network activity is reset
1
Correction with medium priority
PM-WOC-MO
1825733
BAPI_ALM_ORDER_GET_DETAIL: Runtime error CONVT_NO_NUMBER
0001 to 9999
SAPKH60024
2
PS-COS-PLN-CAL
1841113
CNECP_MAINTAIN: ECP data not updated for operations
1
Correction with medium priority
PM-WOC-MO
1853340
Calculation key not determined if work center is changed
0001 to 9999
SAPKH60024
3
PM-WOC-MO
1897140
IW31: Control key not passed to the dummy operation
1
Correction with medium priority
how can we manipulate it and how they effect on our sap and how can be used it
best regards
AtulAtul,
The first thing to check whether you already have them installed - ask your ABAP/Basis Team.
If not, you then need to determine whether they are include in any hot packs that you may be installing in the near future - again ask your ABAP/Basis Team..
Lastly - and probably most difficult - check whether you actually need them..
Also be aware that these notes may require that other notes be installed first (i.e. prerequisite notes).
PeteA -
How can I using functions implicit in dll file in java code ?
How can I using functions implicit in dll file in java code ?
I'm developing a program that interfacing with fingerprint hardware.
I have the finger print already, and I have to the SDK that have all functions for managing this fingerprint.
These SDK functions are represented in dll files.
I want to know how can I use these functions in java code .
I looked on this link of sun forums :
http://forum.java.sun.com/thread.jspa?threadID=305171&messageID=1215613
but I don't Understand the meaning of native code.
Thanks for help.please please please please please please please please help me:
After reading a lot of articles, tutorials, and overviews about JNI (Java Native Interface)
I found that these steps
1. Develop the Java code
2. Compile the Java code to a class file
3. Generate the header file
4. Implement the native method
5. Create the shared library or DLL
6. Run the Java program
Is the common steps in JNI development
The most powerful link was
http://java.sun.com/docs/books/jni/html/start.html
and
http://www.netbeans.org/kb/55/beginning-jni-part2.html
and the pdf oh this link
http://www.ibm.com/developerworks/edu/j-dw-javajni-i.html requiring IBM registration to download it.
But I have already the DLL, and want to the stright forward way to use its functions by java code only.
I don not to write any C++ code .
Is this possible???????????????????????????????
The name of these dll is �zkemsdk.dll�
It developed by ZKSOFTWARE company for managing a finger print �NP1500A�of
http://www.napcogulfsecurity.com/finger_print.asp
thanks for help
Maybe you are looking for
-
I have an Iphone 3 and all of a sudden the speaker no longer works on the phone. I have gone into settings and played around with the volumethere, but that made no difference. Is there something else I should be doing?
-
Why I'm still getting this message error:
Unsupported path(s): /apple-touch-icon-precompressed.png, /apple-touch-icon.png" Details: Mac OS X 10.10.2 Adobe Edge Animate CC V. 2014.1.1
-
I'm trying to set up an internet pay and go account with BTyahoo. However, once I've connected, my ibook won't go to the registration page... it just says "Security Failure. Data Decryption Error" BTYahoo say it must be a mac problem but I've no idea
-
What's the deal with DVI and Thunderbolt displays?
I have up and until now only ever had a MacBook, I planned on getting an iMac desktop but that didn't work out. However, now I am set on getting a Mini, but I remember there was a lot of comotion with the display connector and was hoping someone coul
-
I am new to adobe so forgive me if I should know answer ? lifecycle
I am trying to make a form in Lifecycle which will have multiple document. I may not print all of the pages all of the time so i need some infomation like persons name to be on all of the forms? I am hoping I can set it up so once I type the name on