How can I use ken burns end transition frame to set cropping size for next segment?

I am trying to figure out how to trivially take a large frame view, in a clip, and use a Ken Burns transition to "zoom" into a new view, and then grab the ending "frame" location and size and set that as the clipping rectangle in the next segment.  It seems like I should be able to just select the end fram view, type CMD-C to copy, and then select the next segment, choose "Clip", and type CMD-V to paste that "rectangle" as the clip.  This doesn't work, so I am looking for another way.  There's nothing in the popup menus or the main menus that I can find.
Is this possible?

I am afraid there is no easy way to this with Ken Burns. A better way may be to animate the Crop tool instead, using keyframes.

Similar Messages

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • How can i use my iMac (purchased Dec2011 - Lion OX) as a monitor for my pc laptop? Iwould need a cable approx 1 meter in length.

    How can i use my iMac (purchased Dec2011 - Lion OX) as a monitor for my pc laptop? Iwould need a cable approx 1 meter in length.

    apple sell an minidisplayport to hdmi cable have have to use
    so you have to subtract it's lengh from the cable to connect to if it
    cable being  approximately1meter in lengh
    guide how you do it
    http://macs.about.com/od/usingyourmac/qt/using-target-display-mode.htm

  • How can I use the "gcc compiler and emacs editor" in Solaris 8 for Intel?

    I installed Solaris 8 for Intel to my desktop computer.
    After the installation, I found I couldn't use the companion software (the software CD included in the Multilinugal Media Kit for Solaris 8) - especially the emacs editor and gcc compilers.
    I certainly installed the companion software to my computer. And I can identify that those softwares are
    really installed to my system. In order to check out whether I installed them or not, I went to the "System Administrator" and opened the "Solaris Product Registry", in which I identified that all the files in
    the companion software were succesfully installed in my computer.
    However, when I open terminal or console box and tries to use those
    software, the system responds that "there is no emacs or gcc."
    Why I cannot use those things?
    Did I install the companion software wrong?
    I really don't understand why I can't use them.
    For your reference, I saw the directories "/usr/bin" and "usr/ccs/bin"
    too.
    In /usr/bin I typed
    #as
    and no such command.
    In /usr/ccs/bin
    #as
    and also no such command
    was what I had as a response.
    If I installed the companion software CD correctly and if they are installed somewhere in my computer,
    where I can find them and how I can use those softwares?
    Lastly, whenever I try to connect to my ISP via telnet mode, I see this
    message.
    "Try to connect ...
    connected to ***.***.***.*** (IP address of my ISP)
    Closed by foreign hosts."
    Is there any one who knows why this happens?
    Thanks for reading my question.

    gcc and emacs install in /opt/sfw. You should change your path statement to include /opt/sfw/bin and should obtain the FAQ from sunfreeware.com. The FAQ answers all your questions.
    I have installed gcc and gtk and am using both at this time.
    [email protected]

  • HT3819 How can you use Home sharing to play music on an xbox 360 for example thats connected to the same WiFi network?

    My console is running under the same WiFi service as my itunes, iphone, and all the content i have saved in my library. How can i link, perhaps through HomeSharing, my content from my phone or computer to my xbox console?

    You can't.  Homesharing allow to share your iTunes content over Apple's devices.  XBox isn't made by Apple but Microsoft.

  • How can I use two sequences w/ different frame rates

    I shot wedding (on Sony Z5) initially (1st tape) in DV widescreen (29.97/ 30 fps) but tapes 2, 3 & 4 were shot 1080p24 fps  Big mistake; now obvious.
    Edited all in FCP 6. On trying to cut & paste sequences together I get " cannot nest sequences with different editing timebases".
    I have 23 min.intro/ ceremony sequence as stand alone QT mov now. How can I best convert that and/or merge it w/ the rest ( 62 min. 24 fps  sequences), or perform other action to unite the diff  frame rates into one, w/ best looking quality for the DVD/ bride & groom? Trying to beat Xmas deadline...
    Thanks in advance! Happy Holidays to all.
    3 Ghz Intel Core 2 Duo / 8 GB / OS 10.6.8  FCP 6.0.6

    I went back and forth on this.
    Ordinarily, I'd conform to the format that the majority of the footage was shot in. But if you're going to DVD, and it's going to be compressed to 480 anyway, then why not down convert the 1080 footage to 480?.  At the same time, I would imagine re-timing the 24 (23.98?) to 29.97 would look reasonably consistent with the 29.97 SD.
    This could be done in FCP, but I think Compressor will produce a better result. The adjustments you need are in the Settings menu in the Encoder (with Audio set to pass through), Geometry (720x480 16:9 Anamorphic), and Frame Controls (Resize Filter set to Best).
    This will not be a short encode, so I would first test a short section to double check your settings and sound sync are right, and to compare against the quality of tape 1.
    Good luck.
    Russ

  • How can I use the burn/dodge tool in pencil mode?

    help please?

    I don't believe you can the pencil tool per se with the actual dodge/burn tools, but you could make a
    new layer (Layer>New>Layer), fill with neutral color and set the blend mode to overlay or softlight (depending on how strong you want the effect)
    Then use the pencil tool to paint with black for Burn and white for Dodge on the new layer.

  • How can i use airplay with apple tv on a set of audio speakers?

    hello there,
    i've got a problem with my stereo apple tv combination.
    my TV does support HDMI so i can use my apple tv on my HDTV. only my audio is being played on my internal speakers of my HDTV. I do have a set of speakers. but it doesn't support optical audio out. so i was wondering if its possible to use an Airport Express en plug my speakers in there. then wirelessly send the audio from my apple tv to my Airport/speakers. do any of you think that thats possible?? cause i really can't find another way to transfer my audio to my speakers...
    Thanks alot!!

    Unfortunately you can't send audio from the Apple TV to an airport express, but you can send audio from your mac/pc to the airport express via iTunes/Airplay, you could also send audio from an iPod/iPhone to the express. The express supports both optical and 3.5 mm in a unified port.

  • How can I use an iPhone 4S with a device which is made for an iphone5?

    I own an iPhone 4S and an iPod, I just purchased an alarm clock which has a sync adapter made for the new iphone 5 which has a different size sync. Is their anything I can buy that will allow the two devices to work together or do I need to return the alarm clock?

    Thank you so much for the quick answer, It really stinks that Apple switched from the 30pin to the lightning adaptor. I paid a lot of money for my iPad 2, iPod 4 th and iPhone 4 s. It's not like I can afford buying new devices every couple of years. Apple devices are more expensive than any other brand, thanks for nothing Apple.

  • How can i use apple tv and iTunes movies with component video cables for an older receiver and projector?

    i have an older yamaha receiver and projector both without hdmi inputs but component video instead. I would like to get apple tv and start renting movies through iTunes but apple tv only supports hdmi and ive read that iTunes has codes to prevent the use ot analog cables with movies. Is there a way to adapt hdmi to component video for both apple tv and iTunes easily?

    Yes, HDMI is the only supported method. Also, with converters you will run into issues with HDCP (which will prevent you from streaming DRM content from iTunes etc) as well as resolution.

  • How can i use AdobeSpellingFramework.swc library to draw squiggly line below word for RichEditable?

    Written in Squiggly Release Notes:
    AdobeSpellingFramework.swc
    A class that facilitates the drawing of squiggly lines below words for various text components.
    Im not using squiggly spell check egine bcause it is not supporting arabic language.
    Rest of the work i have completed, i just want to draw squiggly lines below word.
    Please help me.....Thanks

    Did you ever get an answer for this ?

  • How can i use one SQL statement to solve problem?

    How can i use one SQL statement to solve the question below?
    For a Table named A, there is a column named F(char type).
    Now select all the records where F like '%00' and update their F value to '%01'
    Just one SQL statement.Do not use PL/SQL block.
    How to do that?
    Thanks.

    What is the data volume for this table?
    Do you expect lots of rows to have '%00' as their value?
    Following two statements come to mind. Other experts would be able to provide better alternatives:
    If you have index on SUBSTR(f, 2):
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) || '01'
    WHERE  substr(f,
                  -2) = '00';If most of the rows have pattern '%00':
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) ||
               DECODE(SUBSTR(f,
                             -2),
                      '00',
                      '01',
                      SUBSTR(f,
                             -2));

  • How can I use apple gift card in the Philippines . It says it's only applicable in US storefront

    How can I use my gift card in the Philippines  when it says for US Storefront only

    You cannot use that card. iTunes gift cards are only valid in the country of original purchase.

  • How can I use the battery and let it be perfectly healthy?

    Hello everybody!
    I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
    I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
    (Right now I'm performing the battery calibration)
    I'd like to know how can I use the battery and let it be perfectly healthy.
    For instance,
    1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
    2) I usually use to calibrate the battery once a month... Is it a good thing?
    Thanks!
    Andrea

    Everything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
    http://discussions.apple.com/thread.jspa?threadID=1764220

  • How can i use JavaScript in Struts

    Any one can please tell me how can i use simple java script in Struts framework
    like
    <script language="javascript">
    function call()
    alert("You Are In call()")
    </script>
    </head>
    <body>
    <form ..... >
    <input type="button" value="CHECK" onclick="return call()" >
    </form >........
    ok this i can use in normal jsp
    but how can i use same in Struts framework
    Thanks in advance

    This forum is for JSF, not Struts. Your best bet to get your question answered, is to post to the struts user mailing list.

Maybe you are looking for