How can I use Mac OS 10.4.11 and 10.5.5 back and forth?

I installed Mac OS 10.5.5 onto my G4 Sawtooth, which is running on an upgrade processor at 1.3 GHz and 2 GB RAM. The machine also has been running with Mac OS 10.4.11. I love both Mac OSs. But it is cumbersome to restart the machine back and forth. Is there anyway that I do not have to restart the machine for switching the Mac OSs?
Thanks.
Robert

I'll check with OWC and see what they say. I have an ACARD 6880M AEC Controller attached to two internal HD. It caused two Maxtor HD,on e after the other, click-to-death. Since that, I removed the ACARD and have been using one HD without any more "clicking" noise. I posted in the thread below about my experience. Nobody had similar experience. Nevertheless, if OWC feels that ACARD can work with both Mac OS 10.5 and 10.4 at same time, I may consider to put the ACARD back and place another HD in and see if it works.
http://discussions.apple.com/thread.jspa?threadID=1127045
Thanks.
Robert

Similar Messages

How can I use Mac OS in the IPAD2

How can I use Mac OS in the IPAD2?
I really want to use Mac OS in the IPAD2!!!!!!!

no ios is ARM based and all IOS devices have ARM cpu's
osx is x86 based (and older version are also powerPc based)
an os made for a cpu type can't run on another type of cpu

How can I use mac pro without signing in each time now that Ihave downloaded yosemite

Yosemite10.how can I use my mac pro without having to sign in each time?

You may need to unlock System Preferences by clicking on the padlock in the lower left corner.

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

How can I use Mac Mail to send a delayed mail?

I am trying to send a delayed email, meaning the email is not sent immediately
when the send button is pressed but at a pre-determined time.
I have looked through Google, tried different third party scripts available, including
Mail Scripts 2.10.3 by Andreas Amann, but none is supported under Mac OS X Lion.
I believe Mac Mail itself does not support this feature (to my disappointment),
but I read about using iCal and Automator to do my intended purpose.
However, I am not familiar with script-writing. If someone can provide me a
step-by-step procedure OR give me another way to do my intended purpose,
it will be highly appreciated.

I opened Airport Utility today and it appears to have been simplified to the point where you can't do much with it these days.
Yes, welcome to the Fisher Price toy box utility.. where nothing in the way of advanced usage is offered.
Is there a way to accomplish what I want to do that is reasonably simple?
You can put time controls onto the offending addresses.
But if the hackers know anything at all they know how to access the MAC address of the computer and change it.. so the effectiveness of this is limited.
Change the current setup and password.. You must use WPA2 Personal and I recommend you use a pure alphanumeric password, mix case and numbers of 20 characters or more for your situation.. do not give that password to anyone.. protect the admin password of the TC itself equally well but with a different password. And protect the physical access to the TC from anyone in your home.. because the fact is all security on the TC is an illusion if the TC has open access.
See how to find passwords here.
i forgot my password for my router, how can I change them.
So anyone can discover your passwords without your knowledge and leave no trace on your system.
If you make no progress.. I suggest replacement of the TC as the main router of your network.. you need something with controls.. and even better controls that allow you to block people.
The favourite one now is older Netgear WNDR3800 . .you might need to buy from ebay although a few new ones are still around.. alternatively the WNDRMACv2 is simply the same hardware in a white box.. instead of black.
Load gargoyle firmware onto it.. sorry if I even point to where you can find this info my post will be deleted.. I can say it.. just cannot help further.. so use google.. there are lots of posts and let me assure you this get combo.
You can continue to use TC at what it does best.. a dumb wireless AP and location for TM backups.

How can I use mac pro as a server?

I want to use mac pro as a server which 4-5 people can use it at the same time.
Our computers are all macbook or iMac.
I want to share files when I edit videos and photos with my coworkers at a time.
1. Can we connect each mac to mac pro and share our files as a big memory storage?
2. And what can we do with this sharing system as a server?
3. Lastly, how can 4-5 macbooks/iMacs connect to mac pro? Airdrop or other network exists?
Thank you for reading!

The short answer is: no, they can't use the server as a compute server.
That's not quite true, but setting the server up in this way is complicated.
A single user could log on to the Server via screen sharing, assuming that was enabled for them, but only one user at a time could do this.
Many users can log on to the server simultaneously using the command line (using the Terminal and ssh) but they would not have access to any graphical applications, just UNIX command line programs.
There is also a distributed system called Xgrid that ceased to be distributed or developed since 10.7, that allows you to set up particular compute tasks on the server. However, this is not at all like running Photoshop on the server instead of the local machine.

How can I use the pulse train from a 6602 to trigger an niFGEN and niSCOPE on each rising edge of the pulse train?

Hello,
Here is my application: I need to use a 6602 counter/timer to generate a pulse train of certain frequency and duty cycle. On each rising edge of this pulse train, I need to output an arbitrary waveform on Ch. 0 of an niFGEN (5422) AND acquire data from CH. 0 of an niSCOPE (5124). I also need to synchronize the niFGEN and the niSCOPE to the same clock used for the pulse train (6602/ctr0). This process needs to continue until the user stops the system.
I can generate the pulse train using the 6602 just fine using ctr0, but the pulse train shows up on OUT0 by default. When setting up the niFGEN and niSCOPE to trigger on rising/positive slope edge, OUT0 is not an option for either device as a source for the digital rising edge (pulse train). The main options for both are PFI0-3 and RTSI lines.
Questions:
1.) Is there a way that I can direct the pulse train to a location (such as an RTSI line) where BOTH the niFGEN and the niSCOPE can use it as a start trigger for each rising edge? I noticed in MAX that a route can be made between ctr0's internal output and a trigger line and others. If this is a solution, could you please explain how to accomplish this?
2.) Once I configure the niFGEN and niSCOPE to be triggered on a digital rising edge, how can I effectively have this happen for every rising edge from the pulse train? In other words, can I just initiate the FGEN outside of the while loop and it will generate a waveform for each rising edge it sees at the source until the while loop is exitted?
3.) Is setting a reference clock for the niFGEN and the niSCOPE the same thing as synchronizing both devices using the same clock that generated the pulse train? It is not clear to me the difference, and why it would necessarily be useful.
Images of my current front panel and block diagram are attached. If you would rather have the actual VI's just let me know. Any help and/or explanation on this is greatly appreciated. Thanks in advance.
Attachments:
Front_Panel_Control.jpg ‏278 KB
Block_Diagram_Control.jpg ‏263 KB

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

How can I use a Lookup task to lookup from my SQL Result set and have a join

So in my Control Flow, I have an Execute SQL Task which gets my Table result set. I then have a Foreach Loop Container that iterates through the result set and a Data Flow. The first task in the Data Flow is an OLE DB Source SQL Command that retrieves data
columns associated with my result set. I then do a Derived Column so I can SUBSTRING from one of my data columns and now I want to perform a Lookup to my Application Database.
How do I code my Lookup task to utilize my SQL Result set variable and match on it? I cannot use the GUI for the Lookup task as my Lookup has to have some JOINS in it.
Thanks for your review and am hopeful for a reply.

Can you expand on that? I'm sorry but I am new and a novice to the SSIS world and I want to do this as best I can and as efficiently as I can. Are you saying that Rajen's way suggested above is the way to go?
A little background....external data from a 3rd party client. I'v staged that external data to a SQL Server staging table. I have to try and match that data up to our database using SSN, DOB, and Gender...and if I can't match that way then I have to try
and match by Name. I need to make sure that there is only one and only one account for that match. If I cannot match and match one and only one, then I'll create rows on a DataAnomaly Table. If I do match, then I have to check and make sure that there is only
one and only one Member span for that match. Similarly handle the data anomaly and then check and make sure there is a "Diabetes" claim and similarly handle the DataAnomaly accordingly.
That's where I'm at. Sooooo are you saying to use Rajen's suggestion? I don't think I can do that because I need multiple SQL tasks and I cannot connect multiple OLE DB Source tasks.
Any help and suggestions are greatly appreciated.
Thanks.

How can I use iCloud to sync to just my account on my iMac and not to my husband's account?

I have an iMac using OS X 10.7.5. I have separate accounts for myself and my husband. I also have an iPhone and an iPad. How do I get iCloud to sync my account with my iPad and iPhone without syncing with my husband's account on the iMac?

If you are using the same AppleID you cannot, just create seperate AppleID's and you should be OK.

HT4993 How can i use my iphone in other country. I´m from USA and i can´t use my iphone in peru. the only message that i see in mu phone is NOT SERVICE. What can i do?

Hello, im in vacation in peru but im from usa and i can´t use my iphone. i already call my line service to actived my phone and they said that everithing is ok but i´m still with out service. Can same one help me to be able to use my iphone. Thank you in Advance!!!!
Sincerely,
Katty Hall

yes, i´m using the same service via roaming. I already call SPRING, and they told me that roaming is actived, but i´m still with out service

How can I use the same master catalog in Lightroom 5 on my PC and Mac?

I have been using a PC with a Sinology NAS for picture storage. The master catalog has been generated from this PC. I would like to use the same catalog on my Macbook Pro. Is there a way to sync the two computers using one common catalog?

Some users have a shared catalog on an external hard drive, which if portable can be carried around. I’ve never use network storage; but in theory it could work if all the file paths were identical on both machines.
The alternative is to use a travel catalog. I dpo this on my Macbook Pro using a 128gb SD card. It means I can then process, edit photos and add metadata etc. When I get home, I import the travel catalog to Lightroom on the Windows PC to combine it with the master catalog.
Here is a video tutorial which demonstrates the use of a catalog on location.
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-use-lightroom-5- on-location/

How can I use QuickTime to make a screen recording that has both video and audio?

How do use QuickTime to make a screen recording that can be saved with both video and audio together?

do you know of any software that would record a QT movie playing on my Mac screen with both audio and video?
I have used Ambrosia's Snapz Pro X ($69) for years, but they are currently upgrading their Kext (Kernel Extension) software for changes inroduced by the Lion release so it might not be your best bet at this time. I also use ScreenFlow but it is a combination capture and editing utility which runs $99 and may include more features than you may need or will use. Have also tried Screenflick ($29) which, to some extent, appears to have a functionality somewhere between that of Snapz Pro X and ScreenFlow. It is a bit more complicated to set up but for the price might be the best bargin at this point. All three can capture the entire screen or a portion thereof, with or without mic/line and/or system audio. (Or at least they all will as soon as Ambrosia updates its Kext routine.)
Here is a URL link posted by QTKirk three days ago to an article that recaps of a number of currently available third-party screen capture apps from around the world several of which may interest you: http://mac.appstorm.net/roundups/utilities-roundups/10-screen-recording-tools-fo r-mac/

How can I use Paypal only when I check the box "pay with Paypal" and not when I check "pay cash" or "pay on my bank account number"

Hello,
Thanks for your time if you can help me solving this problem.
I have used Fromscentral for a long time now and it's really working fine but I can't find a solution for a simple problem I'll try to explain below.
Ok, My students can check which subscription they want :
1 art class 25€
3 month subscription 250€
6 month subscription 500€
When they have made that choice (only one) they can proceed and pay by Paypal.
But what happens if they want to pay their subscription at the studio in cash or if they want to wire the money on my bank account?
Well, it's not possible to select either of those two options and by doing so inactivate Paypal.
That's the problem.
Thanks to let me know how to do this
Phil

Hi,
In this scenario, I would suggest you to create another form for the cash and wire payments. This form can be embedded to the current form you have, students who wants to pay via cash or wire transfers; they can click on the link and fill their application separately.
Unfortunately, it is not possible to disable Paypal; using the conditional form elements.
Regards,
Nakul

How can I use Automator or AppleScript to get text from a web page and paste it in execl?

I don't know how to make scripts or complexed automator workflows... that's why I'm asking.
I'm trying to make a simple app or script to ask me what text to extract from a web page, like name, address and phone number of a web page and paste each one of these data in the righ cell of excel.
I was thinking to promt a request from automator or an applescript to ask me which text to extract from the page or to look throught the HTML of the page to search for specific html tags, from which extracting text and then importing it, or paste it to the specified execl cell. Name in the name cell, address in the address cell and so on.
Can somebody help me to make this script?
If you know an alternative, like a software that already do this or another language to use, please tell.

Try holding down the alt key as you mark the text to be copied. You can then copy columns to table text.

How can I use an external USB drive on my Macmini with Boot Camp and Lion/Windows 7?

I have a MacMini (Last model with a disk drive). The Mini has Lion and Windows 7 installed using Boot Camp. I want to attach a 350GB, USB, HP Personal Storage Device (Hard Drive) to the computer and be able to use it in both Lion and Windows 7 mode. The USB drive is formatted for Windows 7. I only want to use it for storage and back-up purposes for both operating systems. It would be nice if I could access the total disk from either system without having to reboot to change operating systems to view Windows 7 files and reboot again to view Lion files. Can anyone offer any guidance or any informational websites to help me? Thank you for any help!!

Yes, you’ll be able to do that.
(116841)

How can I use Mac OS 10.4.11 and 10.5.5 back and forth?

Similar Messages

Maybe you are looking for