How can I use most of the features of firefox 5 without changing the appearance of my browser?

I just downloaded the new version of firefox, and everything seems great except for the new layout and the change in general appearance. It is less streamlined and more distracting. I do not like the blocky look of the buttons or the lack of division between sections. Is there a way to keep the changes in the way firefox 5 works without the change in appearance?
If there is not, how can I reload the old version of firefox until one I like better is released?

See items 1- 10 in
You can make Firefox 4.0.1 and '''Firefox 5.0''' look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]
I would try to stick with the silhouette gray/black buttons, but since it already bothers you at least stick to a theme or style limited to the ones on the toolbars (not the dialogs, which would be too wasteful) see item #48
* [https://addons.mozilla.org/firefox/addon/strata-xp/ Strata XP] (Theme (buttons), 13.3KB), replaces silhouette toolbar icons with color. Icons are smaller and perhaps less distinguishable.

Similar Messages

  • I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever?

    I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies?
    Thx

    Barbara Hunt wrote:
    Would it be possible for me to download iTunes in Parallels and get the files into that and then onto my iPod?
    Yes, you can download iTunes for Windows using Parallels. If planning on making purchases here and/or authorizing already purchased tracks (from your Mac iTunes library), you are permitted to authorize five (5) computers as per iTunes Store terms of use, regardless of computing platform. No need to create a separate new iTunes Store account.
    However, judging from what you would like to do, your best bet would be to convert the WMAs to AAC/MP3 in iTunes-Windows (iTunes-Mac cannot import WMA files), and drag the files from the Parallels window to your desktop to add to the iTunes-Mac library. (as the iPod itself is currently linked to your iTunes-Mac library)
    Hope this helps,
    Steve

  • How can i use AME for the new OAF page.

    Dear all,
    I have developed a new OAF page and registered under Employee Self Service.
    How can i use AME for the approval process.
    Appreciate your ideas?
    zamora

    I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
    Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
    Let's look at the workflow and putting an OAF Page as notification.
    As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
    In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
    If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
    Hope this gives some idea.

  • How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/

    How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/

    It sounds like you are talking about the cloning tool?
    Tool looks like this:
    Then when selected you can change the size of the brush and using Alt (windows) and Command (Mac) to select your region you want to copy then start to create you cloned image.
    Hope this helps?

  • How can I use Method in the bean

    Hi every one
    please I made a method in for example employees entity "EmployeesImpl"
    the name of method getmax() it return number
    how can I use it at the bean
    for eaxmple when I want to press button give me the value from this method
    sorry Iam still beginner
    thanks in advance

    Thanks sir for your response
    my version
    oracle jdeveloper reales 1 (11,1,1,4,0)
    I use business component
    I make method
    this metod wrote at enitity "EmployeesImpl"
    public Number getMax() throws JboException
    PreparedStatement stat=null;
    ResultSet rs=null;
    try {
    String sql="select max(EMPLOYEE_ID)+1 from EMPLOYEES";
    stat=getDBTransaction().createPreparedStatement(sql, 1);
    rs=stat.executeQuery();
    if (rs.next()) {
    return new Number (rs.getInt(1));
    } catch (Exception e) {
    // TODO: Add catch code
    //e.printStackTrace();
    throw new JboException("error");
    } finally {
    try {
    rs.close();
    stat.close();
    } catch (Exception e) {
    // TODO: Add catch code
    //e.printStackTrace();
    // oracle.jbo.domain.Number
    return new Number (1);
    I made a jsf page
    and I put button at the page
    I want when press the button give me message contain the number which come from previous metod
    thanks my dear

  • I got an iPhone 4 while I was living in Japan. How can I use it in the states now that I live here?

    I was using an iPhone 4 while I was living in Japan. How can I use it in the states now that I live here? It is a perfectly good phone and I don't want to use it only as an iPod and camera.

    That's one option. The other is to sell it (you can probably get close to what you paid for it) or trade it in and get a new unlocked phone directly from an Apple store. That way you can use it in the US, and also in Japan when you return there.

  • How can i use or embed  the ' C'  language in java

    thanks a lot friends for your suggestion on using 'c' language to implement the control of the keyboard ie. to prevent a key stroke of : ctrl+alt+delete keys from closing a running java application. i was advised that it won't be possible to implement this with java language, the use of 'C' language was suggested. i then wish to ask the following:
    1. how can i use 'C'language in a java program and be able to compile to program so that the resultant program can help me prevent the closing of my java-application when the user of the application presses the following keys : ctrl+alt+delete. i don't even know the c language at all. how can i start and how can i combine the resultant code with java.
    2. i'm thinking of creating an application that retrieves information from a database, like microsoft sql or oracle, and displays the resultant data from a table, say STUDENT TABLE, in a java application using the JTable class. i don't even know how to use this JTable but i've seen it used and know it will suit what i have in mind.
    3. how can i make the table dynamic, ie. how can i make the table to immediately register / show the result of an update to the 'STUDENT' table in the database.
    4. THANKS FOR YOUR HELP IN ADVANCE. i will most appreciate it if you can give me a sample code or a site where i download one. once again thanks.

    Good luck disabling Ctrl+Alt+Del! I've read quite a bit about it, and at least on Windows 2000 (not sure about NT) or higher, disabling it is next to impossible. Problem is CAD is a system command, and the OS doesn't even send the keys to the active program. Ctrl+Alt+Del is handled by the GINA (Graphical Identification and Authentication) DLL installed on the system. You'll have to write and export the functions you need and change the GINA DLL used by the system to your own. Bear in mind that any small mistake in the dll can cause you to lose access to your computer if you haven't taken precautions!
    On Windows 95/98, disabling Ctrl+Alt+Del is fairly easy as you just have to write some simple native code to fool the system that a password protected screensaver is running.
    I've provided a link regarding winlogon and GINA here, but you've been forewarned!
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/security/winlogon_and_gina.asp

  • How can I use comma in the return values of a static list of values

    Hi all,
    I want to create a select list (static LOV) like the following:
    Display Value / Return Value
    both are "Y" / 'YY'
    one is "Y" / 'YN','NY'
    I write the List of values definition is like this:
    STATIC:both are "Y"; 'YY',one is "Y";'YN', 'NY'
    However, it is explain by htmldb like this:
    Display Value / Return Value
    both are "Y" / 'YY'
    one is "Y" / 'YN'
    / 'NY'
    I tried using "\" before the ",", or using single or double quote, but all these do not work:(
    How can I use a comma in the return values?
    Thanks very much!

    "Better still, why not process the code of both Y with 2Y and one is Y with 1Y? "
    Could you please explain in detail? thanks! I am quite new to htmldb
    In fact I have a table which has too columns "a1" and "a2", both the values of these two columns are "Y" or "N". AndI want to choose the records that both a1 and a2 are "Y", or just one of a1, a2 is "Y".
    So I write the report sql like this:
    "select * from t1 where a1 || a2 in(:MYSELECTLIST) "
    Thus, I need to use "," in the LOV, since expression list in IN(,,,) using ",".
    Any other way to implement this?

  • How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

    It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again.  If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp.  However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it.  If I try to drag it to a new sequence, it just says no.  If I click "Create Sequence from Clip" it creates an empty sequence.
    So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis?  is this possible?  For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit.  That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over.  If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio?  Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

    I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
    You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
    So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
    So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow. 
    If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s) 
    You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
    (If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
    P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

  • Got an iPhone 3G, but can't use most of the features in South Africa-HELP!

    Hi there.
    I got my iPhone about 4-5 months ago in South Africa. I love the hardware, I love the way it looks, what you can do with it, etc. But there's one thing I find really really annoying, and that is the fact that I can't use the phone features that users in other countries have access to.
    No, I haven't run into any technical problems.
    The problem is that we have hardly anything available in our iTunes store. I invite you to switch your iTunes browser to the South Africa store and check it out... Yup, that's right, we have no music, movies, TV shows, podcasts or audiobooks. So what do we have? Some apps... yep some, but from the looks of it a greatly reduced list. Many apps I've found links to on the net, which people recommended, are simply not in our store. Even free apps, for example Google Earth.
    But the most glaring omission is the Games category... yep, not a single game available to South African users.
    So, to get an iPhone here requires a 2 year contract and another $300 on top of that for the 8GB version, so it surely isn't cheap... and yet I can't even make a custom ringtone because only music downloaded from the iTunes store can be used... I could do that on my very first Nokia phone which was a dinosaur w.r.t. technology compared to the iPhone.
    I honestly don't understand it...
    So, what help do I need?
    I need to find out who I can contact at Apple to reason with regarding the content of our iTunes store. I find it unacceptable that people who hack their phones have a FAR better experience than people who do the right thing. So, if you work at Apple and read this or you know someone at Apple that could perhaps help me find the correct person/people to talk to about this, then please please send me a mail with the appropriate details. My email address is [email protected] (yes, I'll even post my email address on a public forum )
    I don't think I am being unreasonable to expect a good level of service for a high end product, and at this point I am really unhappy with the service. Not the customer support etc, in fact the people I've had contact with are helpful, except that they cannot provide me with the information I need.
    If you can help, then thank you very much.
    Take care.
    - Emile

    Hi there.
    Thank you neuroanatomist for the info on creating a ringtone. I'll try it.
    I should perhaps have mentioned that I have tried all the official channels, including contacting support and sending feedback over the last couple of months. The support people sympathise but can't really help me and I haven't received anything w.r.t. the feedback I have sent, more than once.
    I'm now turning to the other users in the hope that someone can get me into contact with a person/people inside Apple that might be able to shed more light on this.
    I've already contacted our local distributors and my mobile phone provider and they have told me that it is Apple and only Apple who decide what is available in the store.
    W.r.t. licensing etc, I suspect that there may be some legalities involved here, however it's not like we are on a different planet - we get the same DVDs and movies and TV programs here as everywhere else - just not on the iTunes store... So once again everything points back to Apple and not to local laws. As far as I know our laws w.r.t. media are pretty standard and mostly based on UK law, but I am no legal expert.
    I would even be happy to get a "we know it's not great, we're working on it", or a "it may take some time, but hang in there" ... but I haven't even been able to get that... which is extremely frustrating.
    Take care,
    Emile.

  • Can't use most of the apps i need.

    Hello fellow apple users.
    iPad 1
    iOS 5.1.1
    At the time i bought the iPad, i paid for a insurence from the store (not apple care). After 3 years my iPad fell few weeks ago and i offered it for repair. After 2 weeks i got a replacement iPad 1. After installing some of my most used apps, i came to a conclusion around 1/3 of the apps i wanted to install needed a higher iOS version then i had. I looked into the iPad and couldn't update it too a higher version. So at this moment i can't use alot of apps (including some i bought). Already talked to someone from the support and they said they can't do anything for me. The only thing i could do was buy a new iPad or call the companies from the not working apps. The last one is very stupid in my opinion because already 4/9 apps i tried to install didn't work and i dont like paying lots of money for calling all those companies and accomplish nothing. Is there any solution for this problem. I don't know what to do at this point. The iPad i have now is fast enough for me and works great besides all the importent apps i cant use and i dont feel like buying another iPad if this one works very well.
    Is there anyone who can help me with this problem?

    Try this similar procedure that a user did on an iPad 1 to get Netflix.
    https://discussions.apple.com/thread/5753106?tstart=30
    On your iPad go to the Purchased tab in the App Store app and see if you can download an older compatible version of it.
     Cheers, Tom

  • How can I use airplay in the classroom?

    I want to use my iPhone in the classroom via airplay.  How do I do this without having to pay for an airport express?  Can I not just mirror the images wirelessly?

    Hi
    To use airplay you need an airplay capable device such as Apple TV and an iPhone that is 4s or higher, mine is only 4 so I can't access airplay. Once both the Apple TV and phone or iPad are connected to the same wireless notwork you will be able to mirror your screens.
    I hope this helps.

  • How can I use WebGLview in the iBook widget template in iAd producer?

    Recently I am trying to use iAd producer to create a iBook Author widget. What I need is to show a 3D .obj file in it. How can I do that? Is WebGL supported in the iBook Author template?

    Per iAd Producer help (https://help.apple.com/iadproducer/mac/5.0/index.html?localePath=en.lproj#/iade7 39fa44):
    Available in ad projects only.
    It was noted during an iBooks Author / iAd Producer seminar I attended that iBooks had not enabled WebGL content, so I encourage you to request support from Apple:
    http://www.apple.com/feedback/ibooks.html
    Alternatively, iBooks Author can present .obj files natively in their own widget:
    http://www.apple.com/ibooks-author/gallery.html#gallery-interactive-3d
    Obviously, the presentation is limited to the object and not any of the other interesting things you might be able to do with HTML and a WebGL object.
    Does that help?

  • What is User flag and how can i use it with the mails?

    Hi.
    i do wana know what is meant by user flag and how it is different from System flag.?
    can i use user flag to distinguish the mail. in my application?
    Thanks,
    Dushyant Kumar

    System flags are defined by the IMAP spec and every server has to support them.
    User flags are defined by the application. Different IMAP servers may have different
    limitations on user flags.

  • How can I use eCompanion in the Author mode with the visual editor in Firefox?

    Our college uses eCompanion, but the current platform on works with the visual editor in the XP version of the Windows operating system. Online Chat help said that using Firefox with the Xihna Here plugin was a successful work around. I am unable to find information about the above listed plugin. I need help.

    I have been experiencing similar problems with the HTML Editor and have managed to find an answer that should start to answer some of my questions. The Apex HTML Editor Standard is actually an HTML editor called FCKeditor. The FCKeditor has a Javascript API that can be found at http://docs.fckeditor.net/FCKeditor_2.x/Developers_Guide/JavaScript_API. Unfortuately this doesn't seem to give the whole answer and I found more at http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:49607.
    I needed to get the text entered within my html editor standard (e.g. P1_MYTEXT) and use it within my javascript function. I did this by using the following script
    <script language="JavaScript" type="text/javascript">
    function showtext(){
    var oEditor = FCKeditorAPI.GetInstance('P1_MYTEXT');
    var editortext = escape(oEditor.GetXHTML(oEditor.FormatOutput));
    alert(editortext);
    </script>
    Hope this helps.
    Matthew

Maybe you are looking for