How can I use my 2nd TC HD as an attached (non TM) drive?

I am using my 2nd TC to extend my wi-fi network and would like to use its HD as a SuperDuper back up volume whilst retaining TM backups on the No 1 TC. Any suggestions please.

Both of your Time Capsules should show up under the SHARED heading when you open Macintosh HD or the Finder from the dock.
Can you see them?
If yes, then SuperDuper should be able to as well....if you have the full featured version of SuperDuper (not free).

Similar Messages

How can I use my 2nd gen iPod nano in my car?

My car has a CD player, no cassette player and I was wondering what accessories anyone recommends to use my 2nd gen iPod nano in my car?? Send link if you have one. Thanks!

Various methods are listed here.
http://www.pcmag.com/article2/0,1759,1866732,00.asp

How can I use Time Machine with my existing network attached storage drives

I am a new mac user switching over from windows and have an extensive amount of existing equipment including 2 network attached storage devices (Buffalo Technologies). I would like to use these with Time Machine, but can not figure out how to do it. When I enter time machine setup it does not show these drives while the Finder does.

As of right now we are all SOL unless you own a Time Capsule. At the very least I wish apple would offer some kind of trade-up if they are not going to release a software update.
It really doesn't make any sense why we can't do this with a standard AEBS. Any fix should just be a matter of software, and while technically apple covered its butt with that little "subject to change" disclaimer on the leopard preview page, pulling it at the last minute and expecting those who believed their advertisement to buy another device that does the exact same thing for more money is just wrong. Give us a break apple, tell us your at least working on a fix, its the right thing to do.

How can I use Easylock to lock a folder in a Sony Microvault drive?

Can anyone tell me how to use Easylock to lock a holder in a Sony Microvault USM8GU with password? Or how to lock the entire microvault with password?

Hello,
Are you referring to this specific example or calling Java code in general? I don't have any examples that demonstrate Java code explicitly, but there are several examples of calling C DLL's. If you take another look at the link mentioned above:
How Do I Integrate Java with National Instruments Software Products?
http://digital.ni.com/public.nsf/websearch/BEE812007BA2A9B486256BC80068A49A?OpenDocument
It mentions using JNI and a wrapper DLL in C. Calling C DLL's in LabVIEW is a fairly common practice. This manual should provide all the instruction you need:
Using External Code in LabVIEW
http://digital.ni.com/manuals.nsf/webAdvsearch/8D930295FFBF9F7686256D2C00624728?OpenDocument&vid=niw...
Good luck & happy coding!
Charlie S.
Visit ni.com/gettingstarted for step-by-step help in setting up your system

How can i use a second router to replace verizon fios router?

Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How can i use my tv as the 2nd monitor

hi, how can i use my tv as the 2nd monitor, for example pull a video from desktop to tv for windows7, the computer is hp omni 120 all in one. because i have a cable for it that connects to the tv but i dont know how to connect the pc to the tv. i tried to go on the 'change screen resolutions' but that didnt help. thanks

Hi,
Here is it specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03343048#N1221
You can only see:
Front:
1 - Screen area
2 - Microphone array
3 - Webcam camera
4 - Stand
5 - Speakers
Back:
1 - Optical disk drive (actually right)
2 - Stand
3 - Kensington lock slot
4 - Power button
5 - Memory card reader and other I/O on left side
6 - Motherboard back I/Os (specific I/Os are model dependent)
7 - Activity indicator
8 - Power connector
9 - LAN (ethernet)
10 - Four USB 2.0 ports
11- Audio port (actually left side)
Left:
1 - Hard drive activity indicator
2 - Memory card reader activity indicator
3 - Memory card reader
4 - Two USB 2.0 ports
5 - Microphone jack
6 - Audio port
Right:
1 - Optical disc drive
The only hope is "6 - Motherboard back I/Os (specific I/Os are model dependent)" area:
Please check area 6 above. As mentioned in my previous reply: Most likely your machine has no video out port.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My iphone 4s is 2nd ...then i format..the phone want old user id...how can i used that iphone back because i dont know the id?

My iphone 4s is 2nd ...then i format..the phone want old user id...how can i used that iphone back because i dont know the id?

There is no other solution - as you have already been told, if you don't have that user id and you cannot contact the previous owner of that id for the phone, then there is absolutely nothing that you can do. You have a useless brick that you can't use.
Nothing else to do.

How can i use the same cursor in a loop fro multipletimes.

I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
I am sending the code which i have written in When-Button-Pressed-Trigger...
declare
     sid number;
     pid number;
cursor csid is select distinct(site_id) from cyber_ppt;
cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
     stdt varchar2(10);
     eddt varchar2(10);
     nom number;
     stmonth varchar2(10);
     edmonth varchar2(10);
     cjan number:=0;
     cfeb number:=0;
     cmar number:=0;
     capr number:=0;
     cmay number:=0;
     cjun number:=0;
     cjul number:=0;
     caug number:=0;
     csep number:=0;
     coct number:=0;
     cnov number:=0;
     cdec number:=0;
     i number:=1;
begin
     open csid ;
     loop
     fetch csid into sid;
          exit when csid %notfound;
          message(sid);
     open cpid;
     loop
     fetch cpid into pid,stdt,eddt ;
     exit when cpid %notfound;
     message(sid||'-'||pid);
     stmonth:=substr(stdt,4,3);
     edmonth:=substr(eddt,4,3);
     nom:= months_between(eddt,stdt);
while i <= round(nom)
     loop
     stmonth:=substr(stdt,4,3);
if stmonth='JAN' then
          cjan:=cjan+1;
elsif stmonth='FEB' then
          cfeb:=cfeb+1;
elsif stmonth='MAR' then
          cmar:=cmar+1;
elsif stmonth='APR' then
          capr:=capr+1;
elsif stmonth='MAY' then
          cmay:=cmay+1;
elsif stmonth='JUN' then
          cjun:=cjun+1;
elsif stmonth ='JUL' then
          cjul:=cjul+1;
elsif stmonth ='AUG' then
          caug:=caug+1;
elsif stmonth ='SEP' then
          csep:=csep+1;
elsif stmonth ='OCT' then
          coct:=coct+1;
elsif stmonth ='NOV' then
          cnov:=cnov+1;
elsif stmonth ='DEC' then
          cdec:=cdec+1;
end if;
     stdt:=add_months(stdt,1);
     i:=i+1;
     end loop;
     end loop;
     end loop;
     end;


try this /* untested */
DECLARE
sid           NUMBER;
pid           NUMBER;
CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
stdt        VARCHAR2(10);
eddt        VARCHAR2(10);
nom         NUMBER;
stmonth     VARCHAR2(10);
edmonth     VARCHAR2(10);
cjan         NUMBER:=0;
cfeb         NUMBER:=0;
cmar         NUMBER:=0;
capr         NUMBER:=0;
cmay         NUMBER:=0;
cjun         NUMBER:=0;
cjul         NUMBER:=0;
caug         NUMBER:=0;
csep         NUMBER:=0;
coct         NUMBER:=0;
cnov         NUMBER:=0;
cdec         NUMBER:=0;
i            NUMBER:=1;
BEGIN
FOR rec IN csid
LOOP
                  sid := rec.csid;
FOR cRec IN cpid(sid)
LOOP
                 pid := cRec.pc_id;
                 stdt := cRec.st_dt;
                 eddt := cRec.ed_dt;
stmonth:= SUBSTR(stdt,4,3);
edmonth:= SUBSTR(eddt,4,3);
nom:= months_between(eddt,stdt);
WHILE i <= round(nom)
LOOP
          stmonth := SUBSTR(stdt,4,3);
IF stmonth='JAN'
THEN
         cjan:=cjan+1;
ELSIF stmonth='FEB' THEN
         cfeb:=cfeb+1;
ELSIF stmonth='MAR' THEN
          cmar:=cmar+1;
ELSIF stmonth='APR' THEN
          capr:=capr+1;
ELSIF stmonth='MAY' THEN
          cmay:=cmay+1;
ELSIF stmonth='JUN' THEN
          cjun:=cjun+1;
ELSIF stmonth ='JUL' THEN
          cjul:=cjul+1;
ELSIF stmonth ='AUG' THEN
          caug:=caug+1;
ELSIF stmonth ='SEP' THEN
          csep:=csep+1;
ELSIF stmonth ='OCT' THEN
          coct:=coct+1;
ELSIF stmonth ='NOV' THEN
          cnov:=cnov+1;
ELSIF stmonth ='DEC' THEN
          cdec:=cdec+1;
END IF;
         stdt:=add_months(stdt,1);
         i:=i+1;
END LOOP;
END LOOP;
END LOOP;
END;

I can not find my playlists on apple tv. How can I use my playlists from itunes on apple tv ?

I can not find my playlists on apple tv. How can I use my playlists from itunes on apple tv ?

Hey luisathome,
Thanks for the question. The following resource outlines how to setup Home Sharing between your Apple TV and computer:
iTunes 11 for Mac: Play items in your iTunes library using Apple TV (2nd generation or later)
http://support.apple.com/kb/PH12153
Thanks,
Matt M.

Can I use a 2nd monitor with my HP TouchSmart 310-1020?

can I use a 2nd monitor with my HP TouchSmart 310-1020?

http://h30434.www3.hp.com/t5/TouchSmart-PC/how-to-hook-up-a-second-monitor-on-an-hp-touchsmart-compu...
Kate has some great information in answer to this question.
Take a look.
GeorgeFN
GeorgeFN
I work on behalf of HP.

How can I utilize a 2nd Airport Extreme to extend a network but not WIFI, only hardwired?

Hi All. Need your help figuring this out. The location of the cable line in my home causes a bit of an issue for my internet dependant electronics. My computers have no problem connecting over Wifi but certain peripherals require an ethernet connection as Wifi is not an option for them. I have prepared this quick diagram to explain my perfect set up. I have a current gen Airport Extreme and a Previous gen as well. How can I set my 2nd Airport to receive the Wifi from my main airport, but then only serve as a router, not extend the WIRELESS network. Only provide a hardwired network. In other words, I know how to "extend network" with airport utility, but then the 2nd airport also casts its own wifi network and causes problems. I only want the one single Wifi network. The 2nd router should only be providing ethernet connectivity.
Is this even possible? Both Airports are running the most updated firmware. Any advice would be greatly appreciated!!!

With a properly configured extended network both AirPorts will be broadcasting the "same" Wi-Fi network. This shouldn't impact wired clients at all. The other advantage of using an extended network is that your older AirPort Extreme's Ethernet ports will be enabled for wired clients.
At present the only other option would be to connect the older Extreme to the newer one using an Ethernet connection between them. Then disable the older Extreme's Wi-Fi radios.

How can you add a 2nd i Tunes account on the same computer?

How can you add a 2nd i Tunes account to the same computer?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

How can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?

If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.

How can I use one photo twice in a slideshow

I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
How can I use this one particular photo of her several times in the slide show.
I have tried copy/past and that does not seem to work.
Thanx in advance

I would just duplicate the picture several times and keep inserting duplicates ...

How can I use my 2nd TC HD as an attached (non TM) drive?

Similar Messages

Maybe you are looking for