How can I use my PSE 9 after PSE 11 uninstall killed it?

Hi,
no thanks to Adobe's "This version is no longer supported" policy I end up here - I am VERY upset but I hope it does not show.
I got the PSE 11 as a trial to see if it would have improvements I'd need but I decided not to buy it. Most annoying for me was that PSE 11 registered as "the official PSE" version - so whenever I use Edit in Photoshop Elements in Lightroom I got the PSE 11 version ... great design chooice, to have a TRIAL take over a regular full installation.
Now that the trial is over I decided to uninstall it, hoping to have my trusty PSE 9 as default editor. But, woe to me, as soon as I had PSE 11 uninstalled and tried to start PSE 9 I got an error ...
"Unable to continnue because of a hardware or system error. Sorry, but this error is unrecoverable"
Great - so I uninstalled PSE 9 via System Control and reinstalled it from DVD. First thing I noticed ... it no longer installed Photoshop Elements executable - you know, the one where you have to choose at start between Edit and Organize. All I could find was the actual PhotoshopElementsEditor.exe. It didn't install the Organizer either ... so something is VERY, very wrong.
And when I actually start the PhotoshopElementsEditor it get's to the point of "Reading Workspace Modes" before it pops the same error message as before ...
Great ... now ... does anyone have any idea how to get me out of that mess?
(Just in case someone from Adobe is reading that ... you may not support PSE 9 any longer but you fail to mention that installation and uninstallation of PSE 11 CAN render prior installations unusable ... in case I don't find a solution to get my PSE 9 up and running again this should provide enough leverage ....)
Thanks in advance to any helpful souls out there,
HtFde

It seems that uninstall of PSE11 didn't go fine. Can you please refer to following KB article to make sure that PSE11 has been uninstalled succesfully and then try installing PSE9.
http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-11.html

Similar Messages

How can I use FRF function after i have collected the raw data?

I have collected a set of raw data from a vibrational test. I didn't save the FRF results. I was wondering if i can do a FRF post data analysis. Maby by using a modified verison of the FRF (SVXMPL_Baseband FRF (Simulated).vi found in the NI example finder with sound and vibration toolkit) to read my data (two columns: Stimulus, Response) knowing that i have saved the settings (i.e. sine wave, sample rate, frequency resolution....). This example porgram from NI generates the signal on its own and doesn't allow me to import data.
thank you
cheers
Wafa
PS. the test cannot be repeated, i have modified my program that it can now save the FRF results.

I figured it out...removed the data generator in the stimulation and used my saved data (after lots of modification) into the program...works perfectly now...

How can we use this Windows Genuine page ?

How can we use this page after the Firefox developers remove the "Enable Java" option?
Now I've downloaded this tool to check whether the Windows Genuine or not! But kept get the error message while installing the application!

The javascript option is NOT disabled by developers.
*Maybe this helpful explanatory article is worth reading <br />http://kb.mozillazine.org/JavaScript_is_not_Java
Maybe it helps if you give the links to the tool and pages you are talking about, along with a screenshot of any error messages.
* [[How to make screenshots]]
* [[How do I create a screenshot of my problem?]]
Background info on what I understand you may be interested in: WGA.<br /> (WGA is renamed Windows Activation Technologies & I have also heard it mentioned Windows Genuine Article)
* http://en.wikipedia.org/wiki/Windows_Genuine_Advantage
* http://support.microsoft.com/kb/892130 ''" Description of Windows Genuine Advantage (WGA)"''

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?

Did you check the help page for Correct Camera Distortion and Process multiple file
Correct Camera Distortion: http://helpx.adobe.com/photoshop-elements/using/retouching-correcting.html#main-pars_headi ng_5
Process multiple files: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

How can I use aperture after receiving the full adobe suite? It won't allow me to use it.

How can I use aperture after receiving the full adobe suite? It won't allow me to use it. I receive a dialogue box which states previews are not allowed in aperture and the application is shut down.

Aperture is Apples version of Lightroom. This has nothing to do with Adobe. Ask on a Apple forum. You won't find many people here using this program.
Mylenium

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Retore the device from your iCloud or iTunes backup.
iOS: How to back up and restore your content - Support - Apple - http://support.apple.com/kb/HT1766

I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

I am using iPhone 5 & 4S with iOS 7.02. May I ask how can my preset alarm ring after I switched off completely my iPhone & how to solve it? Thank u!!

http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
user guide

How can I install my copy of PSE on my netbook which doesn't have a disc drive?

How can I installl my copy of PSE on my netbook which doesn't have a disc drive?

Another user just asked this same question. Please see the response at http://forums.adobe.com/thread/1041098.

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

My ipad tells me that my icloud email is already used. That is true. The one whom it is assigned to is me. How can I get it back after deleting it?

My ipad tells me that my icloud email is already used. That is true. The one whom it is assigned to is me. How can I get it back after deleting it?

Deleting an email account for the the mail app will not have any effect on ther AppleId and its use for other services. You need to delete the old ID and set up the new one for other services suxch as FaceTime, App store, etc.
It sounds like you are trying to set up a new ID rather that just adding your old one back in. Or maybe I'm missing something.

How can I use Elements as Edit in using a Lightroom?

How can I use Elements as Edit in in Lightroom using a Lightroom picture. I followed instructions: Photo/Add in/ and received in Elements a blanco screen instead of the picture selected in Lightroom. Please further instructions before ordering Elements 11.

Dear Andaleeb,
I have followed instructions as follows: In Lightroom I have installed Elements under extra plug inns. (on top of the screen reference is made to Photoshop and not Photoshop 11). Under photo, cmd-e does not work since Photoshop is colored gray. As I have Elements installed under extra plug-inns this is highlighted. BUT………..Clicking that, the picture selected does NOT appear in Elements. The screen remains being empty! How can I solve this?
Mr. F.K.A. de Haan
Op 4 mrt. 2013, om 14:50 heeft andaleebfatima1 <[email protected]> het volgende geschreven:
Re: How do I use Elements as a plug in for Lightroom? After plugging no picture appears in Elements!
created by andaleebfatima1 in Photoshop Elements - View the full discussion
Please ensure that you have added PSE Editor as external editor for Lightroom. See : http://www.photoshopelementsuser.com/html/integrate-lightroom-with-ele ments/
Thanks
Andaleeb
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5119785#5119785
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5119785#5119785
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5119785#5119785. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can I use photoshop Elements 8 to make a DVD to play on a regular TV-DVD? [was:DVD-CD-r]

How can I use photoshop Elements 8 to make a DVD that will show on a regular TV-DVD set-up

You can't do this in PSE by itself. I'm assuming you have windows, so output your slideshow as a wmv file and then use Premiere Elements to finalize the disc, if you have that. If not, use whatever you do have (if you can burn DVDs, you have software). Even windows dvd maker will do this.

How can I use my photoshop elements 10 with windows 8 upgrade

How can I use my photoshop elements 10 with my windows 8 uograde

All versions of PSE except versions 1, 3, 5 & 6 will work with Windows 8.
Microsoft Windows 8 compatibility.

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay

How can I use my PSE 9 after PSE 11 uninstall killed it?

Similar Messages

Maybe you are looking for