How can i use OCCI for Mac OS X 10.6.2

Hi All!!!
Where i get documentation how install and develop in xCode - Objective-C?
Thanks for answer

Click here and follow the instructions, or use a product such as ScreenRecycler over a network.
(126809)

Similar Messages

  • How can I use OCCI for oracle8.1.6?

    my database is oralce8.1.6 for solaris8.
    I want to develop database application by OCCI .
    But only oracle9i has OCCI.
    How can I do?
    Where can I get OCCI ,and how can I use it for oralce8.1.6?
    thank you very much!!

    OCI is available for all versions of Oracle including Oracle
    7/8/8i etc. However it is not installed by default with these
    versions. I am assuming that the default 9i installation
    includes OCI. You should be able to install OCI for other
    versions through one of the development platforms e.g. ProC/C++
    etc.

  • HT3748 since upgrading to Mountain Lion, my Mac Mail no longer works well w/exchange email; so, I have had to switch back to outlook. Now, how can I use outlook for mac's calendar and contacts with icloud?

    Since uprgading to Mountain Lion, my mac mail no longer works with my exchange email properly. I finally gave up and moved back to outlook for mac, but now my new issue is using outlook calendar and contacts with icloud; possible?

    Sorry but I'm really not to sure what I have. I'm not good with knowing my computer model. All I know is that its a MacBook running with Leopard. I got my computer last year so I suppose its fairly new. Is there a place on my computer where I can check to see what it is (sorry to be so dumb with my own mac)
    And everything else works fine. I love Safari. It's just my mail that doesn't work. Here's the message that pop up several times.
    "The MobileMe IMAP server “mail.mac.com” rejected the password for user “akcastaldo”
    Please re-enter your password, or cancel."
    The only problem here is, even though I enter my password it doesn't do anything. It makes that message go away for about 3-5 mins. After that it pops right back up. And I can't even go into my preference and change my email password. So I don't know what to do.

  • How can i use my ipod mac address to find it?

    simply put, i left my ipod at work. they missplaced it, now i need to locate it... p.s. its only a 3rd gen 32 gig so its not ios 7 campatible ,icloud only works if you have the device and download cloud on to it(and icloud is turned on).....not looking for opinions just looking for options such as: how can i use my ipod mac address to find it?       i do have the mac address

    You cannot.
    If you did not set up find my pod on the iPod itself, then it cannot be tracked.
    Sorry

  • How can i download office for mac from a disc to my macbook air?

    how can i download office for mac from a disc to my macbook air?

    You have four options that I know of.
    1) Use an external DVD drive that will work on the MBA. (Apple's external Superdrive for MBA)
    2) Use a remote disk connection, using another Mac with a DVD drive, and sharing the drive with the MBA.
    3) Download Office from Microsoft's website, and then use only the registration code that came with your DVD purchase to authorize the registration.
    4) Copy the contents of the Office DVD to a USB flash drive, using another computer. Then install from that flash drive.
    Maybe someone else has an idea, if none of the above will woek for you.

  • How can I use TopLink for querys that have two and more tables?

    I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
    Thank you for see and answer this question.

    You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
    Zev.
    check out oracle.toplink.expressions.Expression in the 10.1.3 API

  • How can i use AME for the new OAF page.

    Dear all,
    I have developed a new OAF page and registered under Employee Self Service.
    How can i use AME for the approval process.
    Appreciate your ideas?
    zamora

    I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
    Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
    Let's look at the workflow and putting an OAF Page as notification.
    As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
    In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
    If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
    Hope this gives some idea.

  • How can i use RTFEditorKit for JTextField.

    hi all,
    how can i use RTFEditorKit for JTextField.
    thanks in advance
    daya

    Don't cross post. This is a Swing related question and you have already posted in the Swing forum:
    http://forum.java.sun.com/thread.jspa?threadID=619619&tstart=0

  • How can I use Siri for IPhone?

    How can I use Siri for IPhone?

    Siri only works on the iPhone 4S or iPhone 5. If you have one of those devices, turn it on in Settings > General > Siri.
    If you need more info than that, ask in the Apple forums.

  • How can I use music for ringtones on my iphone 4?

    How can I use music for ringtones on my iphone 4?

    You can take any MP3 file that it 40 seconds or less and change the file extension to M4R. Then drag it into iTunes. It will appear under Ringtones and transfer over next time you sync,

  • How can install java sdk for mac os x 10.6.8

    How can install java sdk for mac os x 10.6.8?

    Deanwdd wrote:
    I mean to update Quicktime for Mac Os X 10.6.8...
    If you're running 10.6.8, Apple menu > Software Update. What version of QT do you have?

  • I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it for copying files on it on mac? I don wanna use it on windows again.

    I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it on my mac for copying files on my passport? I don wanna use it on windows again.

    If you're not going to use the drive on a Windows machine, you should use Disk Utility (Applications>Utilities folder) to erase the drive and format it as "Mac OS Extended (Journaled)" with a single GUID partition (default):
    Good luck,
    Clinton

  • How can I use an old Mac as a monitor for a Mini?

    My sister has an old iMac, circa 2006, that can no longer be updated, so she's considering getting a Mini and somehow using the old iMac as a monitor. Is this possible? I found a very old post that referred to ScreenRecycler, but this appears to be a defunct or out of date product. She has a wifi network, so I'm wondering if that can be used, both for initial setup of the Mini and for normal use, or if an ethernet connection is preferable.

    so she's considering getting a Mini and somehow using the old iMac as a monitor. Is this possible?
    No.

  • How can i use dlls for running rtc3?

    how can i use the dll libraries to use for the rtc3 software?

    amolchoudhary wrote:
    can anyone please help me???
    How? You provide almost no useful information.
    What is rtc3?
    Why do you think you have to use DLLs?
    What did you try so far that hasn't worked?
    What is it you want to accomplish?
    You see what you ask here is just about the same as if someone would ask you to tell them what screw he needs to fix his car.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How can I use XSQLRequest for processing in-memory XMLDocument

    How can I use class XSQLRequest for processing in-memory XSQL?
    What should i pass in URL parameter value for constructor XSQLRequest(XMLDocument p0, URL p1)?
    Could you write the some examples?

    Here's one example of doing this:
    String xsqlPage = "<page connection='demo' xmlns:xsql='urn:oracle-xsql'>"+
                      "  <xsql:set-page-param name='username' value='{@u}'/>"+
                      "  <xsql:set-page-param name='password' value='{@p}'/>"+
                      "  <xsql:query bind-params='username password'>"+
                      "    select 'Authenticated' from dual"+
                      "    where 'SCOTT' = UPPER(?) /* username */"+
                      "      and 'TIGER' = UPPER(?) /* password */"+
                      "  </xsql:query>"+
                      "</page>";
      DOMParser d = new DOMParser();
      d.parse( new StringReader(xsqlPage));
      XSQLRequest req = new XSQLRequest(d.getDocument(),null);
      StringWriter sw = new StringWriter();
      PrintWriter errors = new PrintWriter(sw);
      Hashtable h = new Hashtable(2);
      h.put("u","scott");
      h.put("p","tiger");
      req.process(h,output,errors);
      output.println(sw.toString());

Maybe you are looking for