How can i use one dtd inside another dtd

Hello friends,
I have read some where that one DTD can be imported into another DTD but idont remember how to do it.
My question is suppose we have a DTD say xyz.dtd and i am writing a new DTD say abc.dtd, and lets assume that in abc.dtd i have to declare some of the elements of xyz.dtd, so iwant to import xyz.dtd into abc.dtd.
Can anybody please give me a solution for this.
Thank you,
sridhar.

something similar to this.
// This is abc.dtd
<!ELEMENT MESSAGE_NODE (MSGHEADER, MESSAGEBODY)>
// Include the DTD for the Message Header
<!ENTITY % MSGHEADER SYSTEM "xyz.dtd">
%MSGHEADER;

Similar Messages

How can i use one datatable inside the other?

Hi all,
i need help ... i have this page that shows information from a relational table... for example a mapped table "Countries" that has a java.util.Set inside named "Cities" and i would like 2 know how can i do this using jsf...
The display would be like this:
Brasil
Rio de Janeiro
Sao Paulo
USA
New York
Washington
New Orleans
And Goes on... So i guess it would be a dataTable inside the other, right? but i dunno how to do it...
Thanks for any info. cya

this is somehow a messy example. But just focus on the var attribute of outer datatable and how value attribute of inner datatable is referencing it.
<h:dataTable id="table1" value="#{pc_City_state.listofstates.states}" var="varstates" styleClass="dataTable">
               <h:column id="column1">
                    <f:facet name="header">
                         <h:outputText styleClass="outputText" value="StateName" id="text2"></h:outputText>
                    </f:facet>
                    <h:outputText id="text3" value="#{varstates.stateName}" styleClass="outputText">
                    </h:outputText>
               </h:column>
               <h:column id="column3">
<f:facet name="header">
</f:facet>
          <h:dataTable id="table2" value="#{varstates.cities}" var="varcities" styleClass="dataTable">
                                   <f:facet name="footer">
                                   </f:facet>
                                   <h:column id="column4">
          <f:facet name="header">
          <h:outputText styleClass="outputText" value="CityName" id="text6"></h:outputText>
          </f:facet>
          <h:outputText id="text7" value="#{varcities.cityName}" styleClass="outputText">
          </h:outputText></h:column>
          </h:dataTable>
</h:column>
</h:dataTable>

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support

How can i use one SQL statement to solve problem?

How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.

What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) || '01'
WHERE substr(f,
              -2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) ||
           DECODE(SUBSTR(f,
                         -2),
                  '00',
                  '01',
                  SUBSTR(f,
                         -2));

How can i use one iCloud Photostream on 2 devices?

Due to a bug (or feature) on iOS 8 i can't use the same icloud id on 2 iphones:
https://discussions.apple.com/thread/6536998
So how can i use ONE iCloud Photostream then on 2 devices?
Also, on OSX i can define only one Photostream.
So, how do you import pictures from 2 streams into iPhoto?
Familyshare is not usefull as the pictures are not in Original-Filesize!

Hi ..
Yes. " iPhone 6 or 6 Plus. iPad Air 2 or iPad mini 3"
Set up and use Apple Pay

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

How can i use iphoto pics on another mac across network for screen saver?

how can i use iphoto pics on another mac A across the home network for the screen saver on Mac B?
within iPhoto i can see the mac A's shared library AOK on Mac B but Mac A's library doesn't show up in the screen saver list on Mac B ;-(
tia
Barry

That's exactly what I tried to do, but the iPhoto librry doesn't show up in the pulldown menu. If I click "Choose Folder", the iPhoto library is greyed out and unable to be selected.
For some reason, iPhoto is an option in the pulldown library on my older iMac but not on my MacBook Pro. What gives?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

My slide presentation (with sound) is done. How can I change one song from another?

My slide presentation (with songs) is done. How can I change one song from another?

Do you still have your Aperture Slideshow project? Then open the slideshow and select the one of the green audio file clips in the film strip that you want to replace. Press the "delete" key and drag another audio file from the Media Browser directly onto the slide, where the sound should start.

New to LABVIEW. How can I use one analog channel to trigger acquisiton of a signal on another analog channel?

I am new to using Labview and have been tasked to write data acqusition program for my company. We are attempting to log 6 machines, each with their own asynchronous trigger (I can't use one trigger for all 6 machines). I have the idea to use (for example) ai0 for the measurement and ai1 for the trigger (for one machine), yet I see nothing in the documentation on how this is done. I have tried playing around with the DAQ express VI (I am using Labview7) but still don't see a way to have the setup I am looking for. I'm sure this is a relatively easy question, but I'm unsure where to go to look for an answer. Any helpful pointers or guidance in the right direction
would be very helpful!

If what you want to do is start the acquisition of channel 0 when channel 1 reaches the trigger condition and not start channel 2 until channel 3 reaches it's trigger condition, then no, you cna't do that unless you have multiple daq devices. What can be easily done is continuously acquire all channels and monitor your trigger channels. When the trigger condition is met, then perform the analysis/logging. On the Analyze>Waveform Monitoring palette is the Basic Level Trigger Detection function. Use one for each trigger channel and have it return either the index or relative time of the trigger occurance. This value can then be used to idex that portion of the measurement channel that you're interested in.

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

How can I use my array in another method.... Or better yet, what's wrong?

I guess I'll show you what I am trying to do rather and then explain it
public class arraycalc
int[] dog;
public void arraycalc()
dog = new int[2];
public void setSize(int size)
dog[1] = size;
public int getSize()
return dog[1];
This gives me a null pointer exception...
How can I use my array from other methods?

You have to make the array static. :)
Although I must admit, this is rather bad usage. What you want to do is use an object constructor to make this class an object type, and then create the array in your main class using this type, and then call the methods from this class to modify your array. Creating the array inside the other method leads to a whole bunch of other stuff that's ... well, bad. :)
Another thing: Because you're creating your array inside this class and you want to call your array from another class, you need to make the array static; to make it static, you must make your methods static. And according to my most ingenious computer science teacher, STATIC METHODS SUCK. :D
So, if you want to stick with your layout, it would look like:
public class arraycalc
     static int[] dog;
     public static void arraycalc()
          dog = new int[2];
     public static void setSize(int size)
          dog[1] = size;
     public static int getSize()
          return dog[1];
}But I must warn you, that is absolutely horrible code, and you shouldn't use it. In fact, I don't even know why I posted it.
You should definitely read up on OOP, as this problem would be better solved by creating a new object type.

How can I use one photo twice in a slideshow

I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
How can I use this one particular photo of her several times in the slide show.
I have tried copy/past and that does not seem to work.
Thanx in advance

I would just duplicate the picture several times and keep inserting duplicates ...

HT4623 how can i use one i5 in oman which is bought from australia?

how can I use my i5 in oman which is bought from Australia?

Hi,
I put new sim card (omantel -prepaid) but some msgs. is came.( The sim card that you currently have installed in this phone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the I phone.Please insert another SIM card from a supported carrier or request that this I phone be un locked by your carrier.Please contact Apple for more information ).

How can i use one dtd inside another dtd

Similar Messages

Maybe you are looking for