How can i use ONE server 2012 to be DC for a domain on the WAN only.. NO LAN. and NO VPN..

I need to run an active directory that is on a WAN (Utah). a server 2012 standard will be the DC with 60Mbps internet speed both up and downstream.
approximately 100 clients/member systems will be all over the united states. NO VPN. only via internet. I can use SSL certificate for secure ldap.
I need this setup to use GPO for different permissions and policies instead of manually doing those on each windows 7 or 8 professional system.
Ideas??

Daniel,
I think since this will be the ONLY system that will be running as a DC providing ADDS and the Direct access server, i should follow this advice from the article you sent:
For users who never connect directly to the Contoso intranet or through a VPN, they must use the DirectAccess
Offline Domain Join process to initially join the appropriate domain and configure DirectAccess. When this process
is complete, the users log on normally and have the same experience as if they were directly connected to the Contoso intranet.
Because remember, no user will ever connect directly to the subnet where the server is. so do an offline join First and then start managing.. Only thing im worried about is: they keep saying that the direct access function has significantly improved in windows
8. hmmmmm many systems will be using windows 7 Pro 64Bit. Some windows 8.1 Pro 64bit. should i worry?

Similar Messages

How can I use a Counter in a Card 6601 for several times in the same VI

When I try to use a Counter two times for read and for write, I get always a error (no. 50103). What should that mean.

From the menu Help-->Explain Error...
"The specified resource is reserved. The operation was completed by ignoring or overriding the specified resource."
If you are using one particular counter for both read and write operations, you'll need to clear the read task before configuring the write task and vice versa. To clear the task in traditional NI-DAQ, pass in the task id to "Counter Control.vi" with a control code of 'reset'. When using DAQmx wire the task into "DAQmx Clear Task.vi".
Do you really need to use the same counter in both a read and write mode at various times? Are the other three all tied up? Maybe I or someone else can help more if you describe the app and/or post some example code.
-Kevin P.

How can I use one Add-on prior to another for specific MIME-types?

I'm using Shockwave Flash plugin to watch some videos on YouTube, StreamCloud, etc. It also handles .mkv and .mp4 files/streams. After installing VLC Web plugin to handle MIME-types like mp3/4, mkv additionally and prior to the Flash plugin, Firefox keeps using Flash to handle those types insted. I cannot find options to set the desired priorities. Only disabling the Flash plugin solves my problem, but also keeps me from watching Flash contents, which Is not acceptable.
Did I miss something or is this Firefox's fault?

If you type or paste '''about:plugins''' in the address bar and press Enter, you can see which plugins are associated which various content types.
I do not know how to prioritize one over the other for the same content type if the plugin settings (plugins often have an interface outside of Firefox to adjust their settings) do not allow that.
As for MP4, I don't think Flash normally would be selected. I suspect the website is specifying a Flash media player and streaming the MP4 through that. If you want to hide the Flash plugin from a particular website, you can use the Permissions tab of the Page Info dialog.
Click the padlock or globe icon in the address bar, then More Information, then Permissions. The top section of the Permissions panel should be "Activate Plugins". Here you can select Block for Flash for the current site. After reloading the page, does the media play using a different plugin?

How can i use one SQL statement to solve problem?

How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.

What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) || '01'
WHERE substr(f,
              -2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) ||
           DECODE(SUBSTR(f,
                         -2),
                  '00',
                  '01',
                  SUBSTR(f,
                         -2));

How can i use one iCloud Photostream on 2 devices?

Due to a bug (or feature) on iOS 8 i can't use the same icloud id on 2 iphones:
https://discussions.apple.com/thread/6536998
So how can i use ONE iCloud Photostream then on 2 devices?
Also, on OSX i can define only one Photostream.
So, how do you import pictures from 2 streams into iPhoto?
Familyshare is not usefull as the pictures are not in Original-Filesize!

Hi ..
Yes. " iPhone 6 or 6 Plus. iPad Air 2 or iPad mini 3"
Set up and use Apple Pay

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

Can we use SQL Server 2012 Web Edition as a witness server in mirroring?

Hi All,
Can we use SQL Server 2012 Web Edition as a witness server in mirroring?
Grateful to your time and support. Regards, Shiva

Hi All,
Can we use SQL Server 2012 Web Edition as a witness server in mirroring?
Grateful to your time and support. Regards, Shiva
As Per BOL
We strongly recommend that the witness reside on a separate computer from the partners. Database mirroring partners are supported only by SQL Server 2005 Standard and later versions and by SQL Server 2005 Enterprise Edition and later versions.
Witnesses, in contrast, are also supported by SQL Server 2005 Workgroup and later versions and by SQL Server 2005 Express Edition and later versions. Except during an upgrade from an earlier version of SQL Server, the server instances in a
mirroring session must all be running the same version of SQL Server. For example, a SQL Server 2005 witness is supported when you are upgrading from a SQL Server 2005 mirroring configuration but cannot be added to an existing or new SQL Server 2008 or later
mirroring configuration.
A witness can run on any reliable computer system that supports any of these editions of SQL Server. However, we recommend that every server instance that is used as a witness correspond to the minimum configuration that is required for the SQL Server Standard
version that you are running. For more information about these requirements
http://technet.microsoft.com/en-us/library/ms175191.aspx#SwHwRecommendations
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Can I use one subscription of Acrobat Pro XI for my 3 different computers I use?

Can I use one subscription of Acrobat Pro XI for my 3 different computers I use?

[discussion moved to Acrobat Installation & Update Issues forum]

How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8

Dear Sir/Madam,
How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8.
Actually my problem is that When i am using Custom MessageBox in SelectionChangedEvent of LongListSelector,when i am click Open(Left Button) it's working fine and navigated correctly,But when i am Click the No(Right Button) then it stayed in same page
but all that page is in stuckup i mean that page is not working and not doing any event.
My C#.net Code
private async void userPageLongListSelector_SelectionChanged(object sender, SelectionChangedEventArgs e)
if (e.AddedItems.Count > 0)
if (userPageLongListSelector.SelectedItem == null)
return;
if (dbTenMin == null)
dbTenMin = new Database(ApplicationData.Current.LocalFolder, "tenMInDBSchema.db");
await dbTenMin.OpenAsync();
var res = (sender as LongListSelector).SelectedItem as _10Min._10MinClass.minUserPages;
var resIndex = (sender as LongListSelector).ItemsSource.IndexOf(userPageLongListSelector.SelectedItem);
string selectedPageName = res.userPages.ToString();
string selectedPageDesignUser = res.pageDesignUser.ToString();
int selectedIndex = resIndex;
CustomMessageBox messageBox = new CustomMessageBox()
Caption = "Message...!",
Message = "This form need offline datalist,Please load now.",
LeftButtonContent = "Open",
RightButtonContent = "No"
messageBox.Dismissed += (s1, e1) =>
switch (e1.Result)
case CustomMessageBoxResult.LeftButton:
string uidAndpwd = _10MinClass._10MinStaticClass.csUidAndPwd.ToString();
_10MinClass._10MinStaticClass.csDataListPageDetails = selectedPageDataDetailsForSchema.ToString();
_10MinClass._10MinStaticClass.csAllDataLists = offlineDataBaseDataListNam;
_10MinClass._10MinStaticClass.csNotCreatedSchemaNameOfDBList = notCreatedDataLists;
userPageLongListSelector.SelectedItem = null;
if (dbTenMin != null)
dbTenMin.Dispose();
dbTenMin = null;
NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
else
NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
break;
case CustomMessageBoxResult.RightButton:
break;
case CustomMessageBoxResult.None:
break;
default:
break;
messageBox.Show();
Same custom messagebox code working in Phone_BackKeyPress event i am writing the code in Right Button that e.OriginalSource.ToString(); then it is working fine.
But It is not working in Selection Changed Event in LongListSelector control in Windows Phone 8.
Please help me,as soon as possible.
Thanks & Regards,
SrinivaaS.

What happens if you leave the implementation for LeftButton empty as well , does the page gets stuck in that case also, if you press left button?
i.e.
CustomMessageBox messageBox = new CustomMessageBox()
Caption = "Message...!",
Message = "This form need offline datalist,Please load now.",
LeftButtonContent = "Open",
RightButtonContent = "No"
messageBox.Dismissed += (s1, e1) =>
switch (e1.Result)
case CustomMessageBoxResult.LeftButton:
break;
case CustomMessageBoxResult.RightButton:
break;
case CustomMessageBoxResult.None:
break;
default:
break;
messageBox.Show();
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

How can I use an American credit card to pay for a membership from outside the US?

How can I use an American credit card to pay for a membership from outside the US? My payment page is set up for Japanese credit cards. I can't change to the US store, because the "Select a Store" page just jumps to the "Products" page.
Has anyone else had this problem? Any help would be much appreciated!

Hi Batt5721,
Welcome to Adobe Forums.
The address and the country on the Credit Card should match the billing address then only payment would be possible.
Thanks
Garima

Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?, Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?

Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?, Ethiopia doesn't figure on the countries list. How can I use Itunes store in Ethiopia?

If there is no iTunes Store in your Country... Then there is no iTunes Store you can use...
iTunes Store: Which types of items can I buy in my country?

How can I upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials?

I have just installed Windows Server 2012 Essentials on my Home Network (from the installation DVD). I have done absolutely no configuration Installing Server 2012 was an oversight; I meant to install Server 2012 R2 Essentials.
I tried to correct by installing R2 from its DVD, hoping it would do an upgrade. That didn't work.
Is there a simple way to make it possible to install the correct OS?   For example, can I just demote the existing server and remove any roles that were installed, so that the R2 disk will install over top of the existing installation?
Alternatively, is it safe to just reformat the partition and install R2?
http://technet.microsoft.com/en-us/library/dn408635.aspx seems to imply that this is OK.
David Pike, P.Eng, MCITP

Hi Larry.   Thanks for the reply. It didn't work, but I don't believe you are wrong. Rather I think there is something weird in my system. I'm marking your reply as answer.
Some background: I'm repurposing an older PC (Compaq SR1614X) as a home server, to manage my home network, use as a gateway to my Azure server, and to help my Server 2012 training (on MVA). I've been messing with it for nearly two months,
on and off. From the start, I've had trouble installing the server 2012 software (see previous threads August-27 and August-16
), but when I got to the point that I could install Server 2012 Essentials, I thought I could upgrade to Server 2012 R2 Essentials exactly as you suggest. That was where you helped me a lot, i.e. you confirmed that my expectations were reasonable.
So when it didn't work, I spent most of yesterday trying various different procedures. I got tantalizingly close, but still no cigar.
I can install any Windows Client and Server 2012 Essentials, but the R2 Essentials installation never finishes; it goes into an "error 0x000000C4" boot loop. At first I wondered if it was because I was installing a server over a
server, but you confirmed that's not the issue. I later verified that I cannot install R2 over Windows 7 either, whereas R1 over Win7 is fine. I can only surmise one of two problems:
I have a bad installation disk
There is a hardware issue
I plan to eliminate (1) by creating a new disk from a new download. I have verified that the latest ISO file and the one I have been using have identical byte counts,
For (2), I had suspected that the problem was that the older system has no UEFI, but since R1 installs OK, I am discounting that. Today's effort: to eliminate the DVD drive, I will try booting from a Flash Drive. To eliminate
the hard drive, I will try installing to a different drive.
I am hoping you can help with one more thing. When I run setup.exe with the /noreboot option, I have a better chance of success. The option suppresses the first reboot only, but that one (after "Expanding the setup files") always
fails, so suppressing it gets me almost to the end of the install. Is there a way to modify setup.exe so the it always runs with the /noreboot option?

How can I use one photo twice in a slideshow

I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
How can I use this one particular photo of her several times in the slide show.
I have tried copy/past and that does not seem to work.
Thanx in advance

I would just duplicate the picture several times and keep inserting duplicates ...

How can i use ONE server 2012 to be DC for a domain on the WAN only.. NO LAN. and NO VPN..

Similar Messages

Maybe you are looking for