How can i use original audio track in video editing for iPad 2?

I am struggling to understand how the video editing apps work for iPad 2, and specifically, to understand why all the editing apps I have looked at explain how you can make these terrific video clips by ADDING audio tracks from iTunes, or. From the audio library. I just want to use the original audio on the tape? Is that so strange? Today I took a video clip of my daughter singing with her guitar. I wanted to shorten the length a bit, so I downloaded a couple of Visio editing apps. When I pulled the clip out of my Camera Roll storage into the video editing screen, there was no sound at all,though there were ways to add other sounds ( for .99cents) most frustrating is that nowhere, does Apple explain this. The tutorials just show someone editing a video of their friends ( with no sound) And adding text and music, as if it's normal not to include the actual sound that originally accompanied the video clip. Seems like i wouldn't be the only customer who would prefer to hear my daughters own voice Ina video of her singing, and would like thisexplainedbefore I started downloading editing apps. If it can't be done, couldn't This be posted?

I am not understanding your question, or your complaint, if it is a complaint.
I movies takes a video clip, including its audio track.
You have the option of mutimg it, or of importing some other sound from your music library, or narrating. What other option do you want?

Similar Messages

How can I use ALL audio tracks in multiclip editing?

I want to be able to use all audio tracks after the multiclip cut.
It's only a two camera shoot, but I want to be able to use the ambient room sound from the second camera ... and control its level (in relation to the master audio track on the first camera) AFTER the cuts are made.
Is this possible in multiclip editing? And how does one go about it?
Apologies. I've spent an hour or so in the manual, and it isn't clear ... or I'm just not finding the right reference.
All ears,
Ben

Sorry if I'm steering you down a path you don't want to go or even if there's a better way but I wouldn't be ding complex audio mixing anywhere near the multiclip interface. Export your reference movie or nest the multiclip project into another sequence, bring in your additional tracks, get to work. Just my preferences, I put a bunch of rough keyframes in the audio tracks and enter some markers (and make a lot of paper notes). Then I go back using the large mixer window to do the fine tweaking.
Stick around for a couple of days, some other multiclip users with more experience than I will offer some more useful suggestions.
bogiesan

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8

Dear Sir/Madam,
How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8.
Actually my problem is that When i am using Custom MessageBox in SelectionChangedEvent of LongListSelector,when i am click Open(Left Button) it's working fine and navigated correctly,But when i am Click the No(Right Button) then it stayed in same page
but all that page is in stuckup i mean that page is not working and not doing any event.
My C#.net Code
private async void userPageLongListSelector_SelectionChanged(object sender, SelectionChangedEventArgs e)
if (e.AddedItems.Count > 0)
if (userPageLongListSelector.SelectedItem == null)
return;
if (dbTenMin == null)
dbTenMin = new Database(ApplicationData.Current.LocalFolder, "tenMInDBSchema.db");
await dbTenMin.OpenAsync();
var res = (sender as LongListSelector).SelectedItem as _10Min._10MinClass.minUserPages;
var resIndex = (sender as LongListSelector).ItemsSource.IndexOf(userPageLongListSelector.SelectedItem);
string selectedPageName = res.userPages.ToString();
string selectedPageDesignUser = res.pageDesignUser.ToString();
int selectedIndex = resIndex;
CustomMessageBox messageBox = new CustomMessageBox()
Caption = "Message...!",
Message = "This form need offline datalist,Please load now.",
LeftButtonContent = "Open",
RightButtonContent = "No"
messageBox.Dismissed += (s1, e1) =>
switch (e1.Result)
case CustomMessageBoxResult.LeftButton:
string uidAndpwd = _10MinClass._10MinStaticClass.csUidAndPwd.ToString();
_10MinClass._10MinStaticClass.csDataListPageDetails = selectedPageDataDetailsForSchema.ToString();
_10MinClass._10MinStaticClass.csAllDataLists = offlineDataBaseDataListNam;
_10MinClass._10MinStaticClass.csNotCreatedSchemaNameOfDBList = notCreatedDataLists;
userPageLongListSelector.SelectedItem = null;
if (dbTenMin != null)
dbTenMin.Dispose();
dbTenMin = null;
NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
else
NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
break;
case CustomMessageBoxResult.RightButton:
break;
case CustomMessageBoxResult.None:
break;
default:
break;
messageBox.Show();
Same custom messagebox code working in Phone_BackKeyPress event i am writing the code in Right Button that e.OriginalSource.ToString(); then it is working fine.
But It is not working in Selection Changed Event in LongListSelector control in Windows Phone 8.
Please help me,as soon as possible.
Thanks & Regards,
SrinivaaS.

What happens if you leave the implementation for LeftButton empty as well , does the page gets stuck in that case also, if you press left button?
i.e.
CustomMessageBox messageBox = new CustomMessageBox()
Caption = "Message...!",
Message = "This form need offline datalist,Please load now.",
LeftButtonContent = "Open",
RightButtonContent = "No"
messageBox.Dismissed += (s1, e1) =>
switch (e1.Result)
case CustomMessageBoxResult.LeftButton:
break;
case CustomMessageBoxResult.RightButton:
break;
case CustomMessageBoxResult.None:
break;
default:
break;
messageBox.Show();
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

How can I use an American credit card to pay for a membership from outside the US?

How can I use an American credit card to pay for a membership from outside the US? My payment page is set up for Japanese credit cards. I can't change to the US store, because the "Select a Store" page just jumps to the "Products" page.
Has anyone else had this problem? Any help would be much appreciated!

Hi Batt5721,
Welcome to Adobe Forums.
The address and the country on the Credit Card should match the billing address then only payment would be possible.
Thanks
Garima

HT4437 How can i use the tv as a wireless monitor for my computer?

I can move my pics and music into itunes to watch and hear on tv, but how can i use my tv as a wireless monitor for my computer?

Unfortunately, no mechanism for this exists for Windows. If you had a Mac, you could get AirParrot...

How can i use iphone 4 to make video calls through 3G network

Pls let me know how can I use my IPhone4 to make video calls through my Airtel 3G network. Also pls suggest if any alternate is available. Thanks

Re: Skype
If I used skype wouldn't I only ge able to call other Skype users??

How can I use a game of my macmini in my Ipad?

I bought Zen Bound 2 and downloaded in my MacMini; how can I use the game in my Ipad ? It was a mistake, need I to pay, again, to play the game in my Ipad ?

You need to pay again.
(58032)

How can I export an audio track

I have made an audio track with three songs in GB and now I want to export it and use it as a track for a Keynote slideshow.
How can I export it as AAC or similar?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

How can I merge 2 audio tracks without deleting any sections?

I want to merge 2 audio tracks, but when I do that I loose the overlap bit, I want to save everything, just merge them. How do I do that?
Thanks!
Guy
http://www.guybacos.com/

why do you want to merge them?
If it's to apply a common fx chain, then send them to a buss, put fx on the buss, send that to another free audio channel and record it, so that you've effective bounced within Logic. Then mute the original tracks so you can change whatever you need to.
Best
Steve

How can I export an audio track with just the effect signal without the audio?

I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

In GB, I need to insert an audio track. When I try, it obliterates part of the adjacent bridge (track). How can I insert an audio track in an audio timeline without stepping all over clean material? Is it possible to recover the "clean" track bridge?

Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"

Undo what?
Insert in a new track?
I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
Any suggestions you might have would be appreciated.

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

HOW CAN I SPLIT STEREO AUDIO TRACKS

I'm trying to modify one of the audio tracks but both of the tracks are locked. If I do something with one of the tracks it affects the other one so how can I split it? or separate it? is it stereo? is there any way I can do it? THANKS!!!!!!!

Welcome to the discussions...
opt L - separates stereo channels...
Patrick

How can i use original audio track in video editing for iPad 2?

Similar Messages

Maybe you are looking for