How can I use Palm Pre as a broadband modem?

Folks, please post Pre-related posts in the proper "webOS" forum. Thanks!
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

http://support.apple.com/kb/HT4517

Similar Messages

How can i use Nokia E 65 as a Modem ( to receive w...

Well i have a pc which doesnt have wifi and well is there any way i could use nokia e65 (via usb) since my pc doesnt have wifi/bluetooth etc
To be able to view the wifi connections using my pc ? sorta like a wifi emulator

It can't be done, unfortunately. An Nseries or Eseries phone cannot be used as a WiFi adapter connected to a USB port.
Unless I've misunderstood what you want...
You can use it as a straightforward modem connected by USB cable. For this, make sure you have a data plan with your mobile operator (occasional packet data usage with no data plan can be expensive) and install PC Suite. This allows you to access the Internet on your computer through the phone's GPRS, EDGE, 3G or HSDPA connection depending on your phone's capabilities and network coverage in your area.
Real WiFi USB dongles are inexpensive. You might want to look into that anyway.
Message Edited by grschinon on 18-Aug-2008 10:31 AM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

How can I use my iPhone 4s as a modem

Please help me out!!!

First, contact your carrier and find out if they offer the service. If they do, have them add it to your account. There will be an additional fee. Then, turn it on Settings>Personal Hotspot.

How can i use Button in BEx 7.0

Dear Folks,
Could you help me please ..
In BI 7.0, for BEx analyzer i see we can use button, combo box, analysis grid.
If i have a requirement like this:
1. I have sales report, where it has information about sales person.
2. And i want to filter that report with the sales person that i choose from combo box.
For that requirement, i tried to :
1. I Create a query to Sales info-provider for displaying sales.
2. I Create a query to either to MD Sales person / Sales info-provider in order to get Sales persons data.
3. I assign point no 1 to Analysis Grid.
4. I assign point no 2 to Combo box.
My questions are:
a. Is my techniques correct ??
b. How can i use button to execute filter into the corresponding report ???
c. Is there any tutorial regarding this ?? Could you share it to me please ..
Really need your guidances..
regards,
Niel..

Hi Niel,
You can use the method you specified.
In Bex Analyzer you have design mode where you can have the following items Button, Analysis Grid and Combo box.
To work with the button you need to use the Command Wizard which consists of pre-defined functions, out of those select the one which suits your requirement and supply the parameters. As it is done thorugh a Wizard it would be easy to do.
Also,
The Button Name displays the name of the button, which is generated automatically and is unique. This name is used on the BEx Analyzer Design Toolbar menu to refer to a particular instance of the button.
· Range u2013 Manipulate coordinates for a cell or cells in this field to move or resize the button.
· Button Text - The text (caption) you want to display on the button. You can use this to describe the command the button executes.
· Command Range (optional) - Specify a three-column range of cells in the worksheet that contains command parameters. In these cells, you provide the same parameters (Name, Index, and Value) as in the Static Parameters, but in the worksheet these can be variable, changing during
navigation based on query results or on a value you manually specify.
Button in Bex analyzer
Regards,
Neelesh Jain.

HT2534 How can I use "Family Sharing" without giving details of my credit or debit card? I do not want to give my cards data, I have always used iTunes prepaid cards.

How can I use "Family Sharing" without giving details of my credit or debit card? I do not want to give my cards data, I have always used iTunes prepaid cards.

Hi Saramos,
When setting up Family Sharing you must have a credit or debit card as your payment method. See this article for reference -
Family purchases and payments
When a family member makes a purchase it will be billed to any gift or store credit that they have first. If none exists it will be billed to you.
As the family organizer, you may not set your billing method for purchases to anything other than a credit or debit card. If you have a store credit such as from pre-paid cards, it may not be shared with other family members. See this article for reference -
How iTunes Store purchases are billed
Thanks for using Apple Support Communities.
Best,
Brett L

How can I use "Family Sharing" without giving details of my credit or debit card? I do not want to give my cards data, I have always used iTunes prepaid cards.

How can I use "Family Sharing" without giving details of my credit or debit card? I do not want to give my cards data, I have always used iTunes prepaid cards.

Hi Saramos,
When setting up Family Sharing you must have a credit or debit card as your payment method. See this article for reference -
Family purchases and payments
When a family member makes a purchase it will be billed to any gift or store credit that they have first. If none exists it will be billed to you.
As the family organizer, you may not set your billing method for purchases to anything other than a credit or debit card. If you have a store credit such as from pre-paid cards, it may not be shared with other family members. See this article for reference -
How iTunes Store purchases are billed
Thanks for using Apple Support Communities.
Best,
Brett L

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

How can I use my iPad in France

I live in Canada and I am going to France and Italy in August. How can I use my iPad in Europe.

Do you have a wifi only version or a 3G one?
You can always use free wifi services, anywhere, so hotels, cafe's, restaurants, libraries, and so on which offer free wifi will be available to you (there are even travel web sites available that will list what is available if you search a bit).
If you have the most recent iPad, you can also get a SIM card when over there, with a local carrier and use that (the newest iPads all have international GSM slots).
Or, ask your Canadian carrier what sort of international plans/roaming they may offer.
All depends on just how much access you want or need, and how much you are willing to pay for it. Free is free, a local carrier will almost certainly be cheaper than any roaming plan, but you may need to research who offers what plans (a pre-paid local SIM would be the best option).

How can I use the ScrollTablePane with kodo ?

How can I use the ScrollTablePane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.

Marco-
I am not familiar with any "TableScrollPane" classes. Can you clarify
whether this is some 3rd party custom component, or something you have
written?
Note that we do not provide any pre-build graphical data components with
Kodo, but we do intend to provide some examples in the future.
In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
>
How can I use the TableScrollPane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.--
Marc Prud'hommeaux
SolarMetric Inc.

How can I use the TableScrollPane with kodo

How can I use the TableScrollPane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.

Marco-
I am not familiar with any "TableScrollPane" classes. Can you clarify
whether this is some 3rd party custom component, or something you have
written?
Note that we do not provide any pre-build graphical data components with
Kodo, but we do intend to provide some examples in the future.
In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
>
How can I use the TableScrollPane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.--
Marc Prud'hommeaux
SolarMetric Inc.

HT2204 can I use my pre paid phone credit to download iTunes

How do I use my pre paid phone credit to download iTunes

You can't, you can only use your iTunes account to buy items from iTunes

HT2534 I bought 2 apple store prepaid card , how can i use them if i live in saudi arabia ?

I bought 2 prepaid card and when i tried to use them the told me this is just for us app store , i live in saudi arabia so how can i use them ???

Pre paid cards are not accepted ...
iTunes Store: Accepted forms of payment

TS1646 Can I use my Pre-Paid Credit Card to make purchases for some of the games in the iTunes Game App?

Can I use my Pre-paid Credit Card to make purchases on the Itunes game app for my Ipad 4?
I have searched for an answer and have found none, as well I have not tried to use the card yet
for the simple fact is I have not found anything I wanted to buy yet.....Just wanted to know for future
purchases....thanks!

Hi marieg33,
The following article will explain the order of iTunes billing methods:
iTunes Store: How iTunes Store purchases are billed
Hope this information helps!
- Judy

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

How can I use Palm Pre as a broadband modem?

Similar Messages

Maybe you are looking for