How can I use percentages except pixels in Muse?

I can't find the way to use percentages in muse, If I use only pixels, my website will not adapt to different sizes depending on the screens. Please help me.

Hello,
This is to inform you that muse do not create responsive webpages however you can refer to some suggestion provided by Zak in the link below.
Can you create responsive sites with Adobe Muse?
You can also create separate layouts for Phone, tablet and Desktop.
https://helpx.adobe.com/muse/how-to/muse-mobile-site.html
http://helpx.adobe.com/muse/using/creating-website-mobile-devices.html
Regards
Vivek

Similar Messages

How can I use brandon grotesque font in muse?

Hi, I wanted to use brandon grotesque font in muse as it is a web font in typekit, but i cannot find it in the "web fonts' section in Muse, how can i bring it from Typekit to Muse?

Mark the text you want to assign to the font.
Access the Text drop-down box.
Select Add Web Fonts.
Muse will open up the available Fonts through Typekit.
Select the font, double click to import.
Note: the font you want to add doesn't exist in Muses' Typekit library.
I am not sure if you can add a Typekit font that is outside of Muse's library.

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

How can i use reuse_alv_fieldcatalog_merge function module

I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.

Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid        TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
                     CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gv_repid
      i_internal_tabname     = uv_tab
      i_inclname             = gv_repid
    CHANGING
      ct_fieldcat            = xt_fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " set_field_catalog_spec

How can i use multiple row subquery in update statement

Hai All
I using group function in my update statement.. and i need to update more rows so i need to use multiple row
subquery pls tell me how to use multiple row subquery in update statement
For example
while i am using this like this i got an error
update dail_att set outtime in (select max(r2.ptime) from temp_att where empcode=r2.enpno and
barcode=r2.cardn and attend_date=r2.pdate group by enpno,pdate,cardn);
Pls tell me how to use with example
Thanks & regards
Srikkanth.M

Hai Man
Thanks for ur response Let me clear what i need
First step Fetch the records as text file and stores into table T1
and the next step is i have seperated the text using substring and stores in different columns of a table
There are two shifts 0815 to 1645 and 1200 and 2000
Here I rep IN and O rep OUT
Empno date time inout
001 01-01-10 0815 I
002 01-01-10 0815 I
003 01-01-10 0818 I
001 01-01-10 1100 0
001 01-01-10 1130 I
002 01-01-10 1145 0
002 01-01-10 1215 I
004 01-01-10 1200 I
005 01-01-10 1215 I
004 01-01-10 1315 O
004 01-01-10 1345 I
001 01-01-10 1645 0
002 01-01-10 1715 0
003 01-01-10 1718 0
004 01-01-10 2010 0
005 01-01-10 2015 0
This is my T1 table i have taken data from text file and stored in this table from this table i need to move data to another table T2
T2 contains like this
Empno Intime Intrin Introut Outtime Date
001 0815 1100 1130 1645 01-01-10
002 0815 1145 1215 1715 01-01-10
003 0818 1718 01-01-10
004 1200 1315 1345 2010 01-01-10
005 1215 2015 01-01-10
This what i am trying to do man but i have little bit problems Pls give some solution with good example
And my coding is
declare
     emp_code varchar2(25);
in_time varchar2(25);
out_time varchar2(25);
Cursor P1 is
Select REASON,ECODE,READMODE,EMPD,ENPNO,FILL,PDATE,PTIME,INOUT,CARDN,READERN
From temp_att
group by REASON,ECODE,READMODE,EMPD,ENPNO,FILL,PDATE,PTIME,INOUT,CARDN,READERN
ORDER BY enpno,pdate,ptime;
begin
     for r2 in p1 loop
declare
bar_code varchar2(25);
begin
select barcode into bar_code from dail_att where empcode=r2.enpno and attend_date=r2.pdate;
For r3 in (select empcode,empname,barcode,intime,intrin,introut,addin,addout,outtime,attend_date from dail_att)loop
if r2.inout ='O' then
update dail_att set outtime =(select max(r2.ptime) from temp_att where empcode=r2.enpno and barcode=r2.cardn and attend_date=r2.pdate group by r2.cardn,r2.enpno,r2.pdate );
end if;
end loop;
exception
     when no_data_found then
     if r2.inout ='I' then
               insert into dail_att(barcode,empcode,intime,attend_date)(select r2.cardn,r2.enpno,min(r2.ptime),r2.pdate from temp_att group by r2.cardn,r2.enpno,r2.pdate );
     end if;
end;
end loop;
commit;
     end;
Pls tell me what correction i need to do i the update statement i have used a subquery with group function but when i used it will return only one row but my need is to return many rows and i need to use multiple row subquery
and how can i use it in the update statement
Thanks In Advance
Srikkanth.M

How can I use multiple row insert or update into DB in JSP?

Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,

That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

How can I use my array in another method.... Or better yet, what's wrong?

I guess I'll show you what I am trying to do rather and then explain it
public class arraycalc
int[] dog;
public void arraycalc()
dog = new int[2];
public void setSize(int size)
dog[1] = size;
public int getSize()
return dog[1];
This gives me a null pointer exception...
How can I use my array from other methods?

You have to make the array static. :)
Although I must admit, this is rather bad usage. What you want to do is use an object constructor to make this class an object type, and then create the array in your main class using this type, and then call the methods from this class to modify your array. Creating the array inside the other method leads to a whole bunch of other stuff that's ... well, bad. :)
Another thing: Because you're creating your array inside this class and you want to call your array from another class, you need to make the array static; to make it static, you must make your methods static. And according to my most ingenious computer science teacher, STATIC METHODS SUCK. :D
So, if you want to stick with your layout, it would look like:
public class arraycalc
     static int[] dog;
     public static void arraycalc()
          dog = new int[2];
     public static void setSize(int size)
          dog[1] = size;
     public static int getSize()
          return dog[1];
}But I must warn you, that is absolutely horrible code, and you shouldn't use it. In fact, I don't even know why I posted it.
You should definitely read up on OOP, as this problem would be better solved by creating a new object type.

How can I use the versionning tool to make a coherent solution to export

how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjee

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

How can I use a progress bar in objective c mac

How can I use a progress bar in objective c mac? I have a code that downloads a file and I want to be able to let the progress bar increase by 1. A bit further on the code (to download the file) it needs to increase again. And so on...
My code
-(IBAction) downloadButtonPressed:(id)sender;{
    //get the path to the image that we're going to download
    NSURL *url = [NSURL URLWithString:@"https://www.dropbox.com/s/l6o07m48npxknt4/Cluedo.zip?dl=1"];
    //get the path to documents folder where we're going to save our image
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *DocumentsDirectory = [paths objectAtIndex:0];
    NSString *filePath = [DocumentsDirectory stringByAppendingPathComponent:@"Cluedo.zip"];
    //Download the file to memory
    NSData *data = [NSData dataWithContentsOfURL:url];
    NSError *error = nil;
    //Save it on the Documents directory
    [data writeToFile:filePath options:NSDataWritingAtomic error:&error];
    NSFileManager* fm = [NSFileManager defaultManager];
    NSString* zipPath = filePath;
    NSString* targetFolder = @"/Applications"; //this it the parent folder
    //where your zip's content
    //goes to (must exist)
    //create a new empty folder (unzipping will fail if any
    //of the payload files already exist at the target location)
    [fm createDirectoryAtPath:targetFolder withIntermediateDirectories:NO
                   attributes:nil error:NULL];
    //now create a unzip-task
    NSArray *arguments = [NSArray arrayWithObject:zipPath];
    NSTask *unzipTask = [[NSTask alloc] init];
    [unzipTask setLaunchPath:@"/usr/bin/unzip"];
    [unzipTask setCurrentDirectoryPath:targetFolder];
    [unzipTask setArguments:arguments];
    [unzipTask launch];
    //[unzipTask waitUntilExit]; //remove this to start the task concurrently

Your code really isn't suitable for a progress bar, not a real one anyway. Your code will spend about 99.9% of its time in the method "dataWithContentsOfURL:url". That is not a method you want to use in the real world. It is only for demos or proof of concept exercises. All network operations should be asynchronous. That gives you the ability to gracefully recover when there is a failure and also to do fancy things like display a progress bar and tell the user when the download is complete.
Once you get the asynchronous download logic working, then you can worry about the progress bar. The first thing you will need is the size of the file. Without that, all you can ever do is an indeterminate progress bar or spinner. If you have the size of the file, then you can keep track of how much of the file you have downloaded and update your progress bar with the percentage complete. Make sure to throttle it to no more than incrementing by 1% at a time. Otherwise, a large file or a file transferred in many small chunks, would waste too much time updating the progress bar for no change.

How can I use PowerPivot tables like Excel tables -- printing, etc.?

I can't seem to find any information on this anywhere, and even more surprisingly, no one else seems to have even asked this question...
How can I use tables I create in the Excel PowerPivot window in the same ways I use tables that are in ordinary Excel worksheets, to accomplish tasks such as printing? I am able to use the powerful capabilities of PowerPivot to produce tables with precisely
the information I need for reports -- connecting data from multiple tables/sources, filtering, etc. -- but then there doesn't seem to be any way to actually print what I'm seeing, nor can I seem to access cells in these PowerPivot tables from Excel worksheets.
If a PowerPivot table is conceptually an Excel table with additional power in terms of pulling in data and relating it, it would seem appropriate that all the power of Excel could be brought to bear on these PowerPivot tables, but on the contrary, the available
operations are limited. if, instead, a PowerPivot table is more correctly viewed as a data source that Excel worksheets can connect to, that would be fine, and indeed, one
can use a PowerPivot table as a data source -- except it can't be brought into an Excel worksheet as an ordinary Excel table, unlike most other data sources.
I hope I'm missing something really obvious, and that someone can point out what it is. Thanks.

Kirchh,
When PowerPivot was first designed, the decision was to integrate closely to Sharepoint to allow for team sharing. We are constantly evaluating customer feedback to add more features, and this has been one of the feedbacks we have received. We will consider
supporting this in the future but with no gurantee.
Chu
-- This posting is provided "AS IS" with no warranties, and confers no rights
I'm not questioning why PowerPivot is closely integrated with SharePoint. I'm asking why connecting to the PowerPivot model from within Excel was intentionally blocked by Microsoft, when all the functionality to do so appears to be present.
Is creating an OLE DB connection in Excel to PowerPivot as $Embedded$ supported?
No support. It was originally designed for SharePoint. This changed with Power Pivot for Excel 2013 (it's packaged with it). Originally the scope (in 2010 through 2012) was that it was for SharePoint users. So it became more obvious through that to market it
toward all Excel users. Thus the recent changes.
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How can I use XStream to persist complicated Java Object to XML & backward

Dear Sir:
I met a problem as demo in my code below when i use XTream to persist my Java Object;
How can I use XStream to persist complicated Java Object to XML & backward??
See
[1] main code
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
import java.util.ArrayList;
import com.thoughtworks.xstream.XStream;
import com.thoughtworks.xstream.io.xml.DomDriver;
public class PhoneList {
     ArrayList<PhoneNumber> phones;
     ArrayList<Person> person;
     private PhoneList myphonelist ;
     private LocationTest location;
     private PhoneList(String name) {
     phones = new ArrayList<PhoneNumber>();
     person = new ArrayList<Person>();
     public ArrayList<PhoneNumber> getphones() {
          return phones;
     public ArrayList<Person> getperson() {
          return person;
     public void addPhoneNumber(PhoneNumber b1) {
          this.phones.add(b1);
     public void removePhoneNumber(PhoneNumber b1) {
          this.phones.remove(b1);
     public void addPerson(Person p1) {
          this.person.add(p1);
     public void removePerson(Person p1) {
          this.person.remove(p1);
     public void BuildList(){
          location = new LocationTest();
          XStream xstream = new XStream();
          myphonelist = new PhoneList("PhoneList");
          Person joe = new Person("Joe, Wallace");
          joe.setPhone(new PhoneNumber(123, "1234-456"));
          joe.setFax(new PhoneNumber(123, "9999-999"));
          Person geo= new Person("George Nixson");
          geo.setPhone(new PhoneNumber(925, "228-9999"));
          geo.getPhone().setLocationTest(location);
          myphonelist.addPerson(joe);
          myphonelist.addPerson(geo);
     public PhoneList(){
          XStream xstream = new XStream();
          BuildList();
          saveStringToFile("C:\\temp\\test\\PhoneList.xml",convertToXML(myphonelist));
     public void saveStringToFile(String fileName, String saveString) {
          BufferedWriter bw = null;
          try {
               bw = new BufferedWriter(
                         new FileWriter(fileName));
               try {
                    bw.write(saveString);
               finally {
                    bw.close();
          catch (IOException ex) {
               ex.printStackTrace();
          //return saved;
     public String getStringFromFile(String fileName) {
          BufferedReader br = null;
          StringBuilder sb = new StringBuilder();
          try {
               br = new BufferedReader(
                         new FileReader(fileName));
               try {
                    String s;
                    while ((s = br.readLine()) != null) {
                         // add linefeed (\n) back since stripped by readline()
                         sb.append(s + "\n");
               finally {
                    br.close();
          catch (Exception ex) {
               ex.printStackTrace();
          return sb.toString();
     public String convertToXML(PhoneList phonelist) {
          XStream xstream = new XStream(new DomDriver());
          xstream.setMode(xstream.ID_REFERENCES) ;
          return xstream.toXML(phonelist);
     public static void main(String[] args) {
          new PhoneList();
}[2].
import java.io.Serializable;
import javax.swing.JFrame;
public class PhoneNumber implements Serializable{
       private      String      phone;
       private      String      fax;
       private      int      code;
       private      String      number;
       private      String      address;
       private      String      school;
       private      LocationTest      location;
       public PhoneNumber(int i, String str) {
            setCode(i);
            setNumber(str);
            address = "4256, Washington DC, USA";
            school = "Washington State University";
     public Object getPerson() {
          return null;
     public void setPhone(String phone) {
          this.phone = phone;
     public String getPhone() {
          return phone;
     public void setFax(String fax) {
          this.fax = fax;
     public String getFax() {
          return fax;
     public void setCode(int code) {
          this.code = code;
     public int getCode() {
          return code;
     public void setNumber(String number) {
          this.number = number;
     public String getNumber() {
          return number;
     public void setLocationTest(LocationTest bd) {
          this.location = bd;
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(location);
        f.getContentPane().add(location.getControls(), "Last");
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
     public LocationTest getLocationTest() {
          return location;
     }[3].
package test.temp;
import java.io.Serializable;
public class Person implements Serializable{
     private String           fullname;
       @SuppressWarnings("unused")
     private PhoneNumber      phone;
       @SuppressWarnings("unused")
     private PhoneNumber      fax;
     public Person(){
     public Person(String fname){
            fullname=fname;
     public void setPhone(PhoneNumber phoneNumber) {
          phone = phoneNumber;
     public void setFax(PhoneNumber phoneNumber) {
          fax = phoneNumber;
     public PhoneNumber getPhone() {
          return phone ;
     public PhoneNumber getFax() {
          return fax;
    public String getName() {
        return fullname ;
    public void setName(String name) {
        this.fullname      = name;
    public String toString() {
        return getName();
}[4]. LocationTest.java
package test.temp;
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class LocationTest extends JPanel implements ChangeListener
    Ellipse2D.Double ball;
    Line2D.Double    line;
    JSlider          translate;
    double           lastTheta = 0;
    public void stateChanged(ChangeEvent e)
        JSlider slider = (JSlider)e.getSource();
        String name = slider.getName();
        int value = slider.getValue();
        if(name.equals("rotation"))
            tilt(Math.toRadians(value));
        else if(name.equals("translate"))
            moveBall(value);
        repaint();
    protected void paintComponent(Graphics g)
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        if(ball == null)
            initGeom();
        g2.setPaint(Color.green.darker());
        g2.draw(line);
        g2.setPaint(Color.red);
        g2.fill(ball);
    private void initGeom()
        int w = getWidth();
        int h = getHeight();
        int DIA = 30;
        int padFromEnd = 5;
        line = new Line2D.Double(w/4, h*15/16, w*3/4, h*15/16);
        double x = line.x2 - padFromEnd - DIA;
        double y = line.y2 - DIA;
        ball = new Ellipse2D.Double(x, y, DIA, DIA);
        // update translate slider values
        int max = (int)line.getP1().distance(line.getP2());
        translate.setMaximum(max);
        translate.setValue(max-padFromEnd);
    private void tilt(double theta)
        // rotate line from left end
        Point2D pivot = line.getP1();
        double lineLength = pivot.distance(line.getP2());
        Point2D.Double p2 = new Point2D.Double();
        p2.x = pivot.getX() + lineLength*Math.cos(theta);
        p2.y = pivot.getY() + lineLength*Math.sin(theta);
        line.setLine(pivot, p2);
        // find angle from pivot to ball center relative to line
        // ie, ball center -> pivot -> line end
        double cx = ball.getCenterX();
        double cy = ball.getCenterY();
        double pivotToCenter = pivot.distance(cx, cy);
        // angle of ball to horizon
        double dy = cy - pivot.getY();
        double dx = cx - pivot.getX();
        // relative angle phi = ball_to_horizon - last line_to_horizon
        double phi = Math.atan2(dy, dx) - lastTheta;
        // rotate ball from pivot
        double x = pivot.getX() + pivotToCenter*Math.cos(theta+phi);
        double y = pivot.getY() + pivotToCenter*Math.sin(theta+phi);
        ball.setFrameFromCenter(x, y, x+ball.width/2, y+ball.height/2);
        lastTheta = theta; // save theta for next time
    private void moveBall(int distance)
        Point2D pivot = line.getP1();
        // ball touches line at distance from pivot
        double contactX = pivot.getX() + distance*Math.cos(lastTheta);
        double contactY = pivot.getY() + distance*Math.sin(lastTheta);
        // find new center location of ball
        // angle lambda = lastTheta - 90 degrees (anti-clockwise)
        double lambda = lastTheta - Math.PI/2;
        double x = contactX + (ball.width/2)*Math.cos(lambda);
        double y = contactY + (ball.height/2)*Math.sin(lambda);
        ball.setFrameFromCenter(x, y, x+ball.width/2, y+ball.height/2);
    JPanel getControls()
        JSlider rotate = getSlider("rotation angle", "rotation", -90, 0, 0, 5, 15);
        translate = getSlider("distance from end", "translate", 0, 100, 100,25, 50);
        JPanel panel = new JPanel(new GridLayout(0,1));
        panel.add(rotate);
        panel.add(translate);
        return panel;
    private JSlider getSlider(String title, String name, int min, int max,
                              int value, int minorSpace, int majorSpace)
        JSlider slider = new JSlider(JSlider.HORIZONTAL, min, max, value);
        slider.setBorder(BorderFactory.createTitledBorder(title));
        slider.setName(name);
        slider.setPaintTicks(true);
        slider.setMinorTickSpacing(minorSpace);
        slider.setMajorTickSpacing(majorSpace);
        slider.setPaintLabels(true);
        slider.addChangeListener(this);
        return slider;
}OK, My questions are:
[1]. what I generated XML by XSTream is very complicated, especially for object LocationTest, Can we make it as simple as others such as Person object??
[2]. after I run it, LocationTest will popup and a red ball in a panel will dsiplay, after I change red ball's position, I hope to persist it to xml, then when I read it back, I hope to get same picture, ie, red ball stiil in old position, How to do that??
Thanks a lot!!

Positive feedback? Then please take this in a positive way: if you want to work on persisting Java objects into XML, then GUI programming is irrelevant to that goal. The 1,000 lines of code you posted there appeared to me to have a whole lot of GUI code in it. You should produce a smaller (much smaller) example of what you want to do. Calling the working code from your GUI program should come later.

How can I use Drupal as a third party CMS with ATG E-Commerce Application?

Hi Friends,
We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
Regards,
Krishna.

I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041. It compares Today to the vacation elig. date and if they match, set a time type indicator to 1. I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours. Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage. In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

How can I use "t3://becluster:6001" rather than "t3://dcsv02,dcsv01:6001"

          I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic server
          5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          I try to make a t3 connection between the PC and the cluster of machines.
          On the Windows PC I have the following configuration for the
          "c:\windows\system32\drivers\etc\Hosts" :
          171.1.70.61     becluster
          171.1.70.62     becluster
          where
          "171.1.70.61 is dcsv01 and
          171.1.70.62 is dcsv02 "
          If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          I have a great failover mechanism : if any of the machine (dcsv01 or dcsv02) are
          down the requests are routed to the other one.
          BUT!! If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          I have a not great failover mechanism :
          say that my windows hosts file looks like :
          171.1.70.61(dcsv01)     becluster
          171.1.70.62(dcsv02)     becluster
          then if dcsv02 is down then all requests are routed to dcsv01 and that is fine.
          BUT!! if dcsv01 is down then I got on my PC the
          "Bootstrap unable to get a t3 connection to dcsv01" exception and failover does
          not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          So how can I use
          "t3://beclsuter:6001" rather than
          "t3://dcsv01, dcsv02:6001" with the same failover service????
          Thanks


          Thanks mike,
          In a UNIX or windows environment how can I get a DNS server that round robin?
          "Michael Reiche" <[email protected]> wrote:
          >You need to have becluster defined in a DNS that round-robins.
          >
          >Mike
          >
          >"Martial" <[email protected]> wrote in message
          >news:[email protected]...
          >>
          >> I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic
          >server
          >> 5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          >>
          >> I try to make a t3 connection between the PC and the cluster of machines.
          >>
          >> On the Windows PC I have the following configuration for the
          >> "c:\windows\system32\drivers\etc\Hosts" :
          >> 171.1.70.61 becluster
          >> 171.1.70.62 becluster
          >> where
          >> "171.1.70.61 is dcsv01 and
          >> 171.1.70.62 is dcsv02 "
          >>
          >> If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          >> I have a great failover mechanism : if any of the machine (dcsv01 or
          >dcsv02) are
          >> down the requests are routed to the other one.
          >>
          >> BUT!! If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          >> I have a not great failover mechanism :
          >> say that my windows hosts file looks like :
          >> ..
          >> 171.1.70.61(dcsv01) becluster
          >> 171.1.70.62(dcsv02) becluster
          >> ..
          >> then if dcsv02 is down then all requests are routed to dcsv01 and that
          >is
          >fine.
          >> BUT!! if dcsv01 is down then I got on my PC the
          >> "Bootstrap unable to get a t3 connection to dcsv01" exception and failover
          >does
          >> not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          >> So how can I use
          >> "t3://beclsuter:6001" rather than
          >> "t3://dcsv01, dcsv02:6001" with the same failover service????
          >>
          >> Thanks
          >>
          >>
          >>
          >
          >

How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.

how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.

How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b>

How can I use Method in the bean

Hi every one
please I made a method in for example employees entity "EmployeesImpl"
the name of method getmax() it return number
how can I use it at the bean
for eaxmple when I want to press button give me the value from this method
sorry Iam still beginner
thanks in advance

Thanks sir for your response
my version
oracle jdeveloper reales 1 (11,1,1,4,0)
I use business component
I make method
this metod wrote at enitity "EmployeesImpl"
public Number getMax() throws JboException
PreparedStatement stat=null;
ResultSet rs=null;
try {
String sql="select max(EMPLOYEE_ID)+1 from EMPLOYEES";
stat=getDBTransaction().createPreparedStatement(sql, 1);
rs=stat.executeQuery();
if (rs.next()) {
return new Number (rs.getInt(1));
} catch (Exception e) {
// TODO: Add catch code
//e.printStackTrace();
throw new JboException("error");
} finally {
try {
rs.close();
stat.close();
} catch (Exception e) {
// TODO: Add catch code
//e.printStackTrace();
// oracle.jbo.domain.Number
return new Number (1);
I made a jsf page
and I put button at the page
I want when press the button give me message contain the number which come from previous metod
thanks my dear

How can I use percentages except pixels in Muse?

Similar Messages

Maybe you are looking for