How can i use perspective warp in trial version. its greyed out

i have downloaded trial version to try handson Perspective warp feature but its greyed out. how can i use it?

Puppet Warp, Transform>Perspective, Transform>Warp etc. can work without GPU acceleration (Test by CS6).
But it is necessary to unlock the background layer (double click in the layer panel converts the background
layer into an unlocked Layer0).
Best regards --Gernot Hoffmann

Similar Messages

  • How can I use my iPad to check-in and check-out books to my students in my classroom?

    How can I use my iPad to check-in and check-out books to my students in my classroom?

    Assuming there won't be any wi-fi netwokrs, will there be cellular reception there?
    If so, you need to check if a carrier or the carrier if there is only one, offers a data only plan for the iPad and similar devices along with providing a mico-SIM card. If a carrier offers a data only plan with a full size SIM card, you can cut the SIM card down to mico-SIM size. There are devices that provide for this.
    If there is cellular reception but a carrier or the carrier doesn't have a data plan only for the iPad and similar devices but offers a tethering plan for phones on their network, you can tether your iPad to the cell phone for internet access via the carrier's cellular network.

  • How can I get illustrator to load ( trial version)?

    How can I get illustrator to load ( trial version)?

    z hitt,
    This may be one for this specialized forum (where you may be able find the answer from previous threads),
    http://forums.adobe.com/community/download_install_setup
    or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
    http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up

  • How can I  move pictures if the manual sort is greyed out?

    I have several pictures in a folder in I photo. They werfe taken by 2 different cameras. I want to move one picture next to another but the sort is by date and the manual selection is greyed out
    Bob Dreyer

    1 - in iPhoto folders do not hold photos - they hold other folders or albums - are you speaking of events by any chance?
    2 - you can isolate the photos taken by a camera by making a smart album for that camera
    3 - if you are speaking of events then the two cameras time/date settings were incorrect - you can adjust that by selecting the photos in the smart album for that camera and using the adjust time/date command - once the time/date is correct the photos will sort next to each other
    alternatively you can put photos in an album and in an album you can manually sort them
    LN

  • How can i turn off passcode when the option is greyed out

    how can i turn off passcode in iPhone 4S when the option is greyed out?

    You can't. Do you have an Exchange account on the phone? If so, the ability to disable the passcode can be restricted by a profile installed when setting up the Exchange account.

  • After updating Creative Cloud, I still can't use perspective warp, it doesn't show up under EDIT.

    WHY!!!?????

    Update your graphics driver and enable the respective options under Preferences --> Performance --> Hardware Accelelration.
    Mylenium

  • LV 7.1 - How can I use installer to create folder with its files included w/o adding each file?

    I have several files to place in folders created by the installer. Can't seem to see how I can avoid adding each file individually at build time. Is there an easier way to do this? Simply "adding" a folder would be a solution.
    Thanks
    Fran

    Fran,
    I believe this question is directly addressed in this online Knowledgebase.
    Kind Regards,
    E. Sulzer
    Applications Engineer
    National Instruments

  • How can I fix this: Firefox is locked (unlock options greyed out) in private browsing mode on my MacBook Pro running Lion.

    It seems frozen in private browsing mode. Cannot get it back into normal browsing mode. Firefox is completely updated on the MAC as is the MAC Lion OS.

    Contact the App store for Apple ID help. Their support link is on the right of the App store window
    LN

  • How can I use MS Access in Lab View

    how can I use MS Access in Lab View
    Its urgent

    There are a couple of routes you can take to communicate with MS Access in LabVIEW. The preferred method is our Database Connectivity Toolset. This allows you to use VIs to communicate with your database. Here is a link to the product for more information.
    http://sine.ni.com/apps/we/nioc.vp?cid=6429〈=US
    Your other choice would be to use ActiveX. I believe there are a couple of examples on our web site using it. Overall you will probably spend a lot more time taking this route.
    Matt Kisler
    Applications Engineer
    National Instruments

  • How to extend my SAP NetWeaver 2004s Trial Version license ?

    Hi All,
    I am new to the netweaver, thought i had installed the system some time back, now the license of the trial version has expired and i want to know how can i go about extending the trial version license. Or do i have to go through all the pain of installing the system again. Please help me out.
    Cheers,
    Sudheer Alladi.

    No. You can send a request again with your Hardware Key on the below given ink and you will get your license.
    [License Renew|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm]
    Regards,
    Subhash

  • How to tell my iwork is a trial version or has been activated?

    How can I tell it is a trial version or not?

    Menu > Pages > About Pages
    It should say under the version number.
    Peter

  • Why are menus grayed-out in trial version? how can I use the effects then?

    why are menus grayed-out in trial version? how can I use the effects then?

    Every piece of software has a learning curve, and its own terminology.  After Effects is a complex professional tool, used by home enthusiasts right through to feature film makers. 
    There's plenty of very user friendly video editing software that will do the tasks you've mentioned easily.  Might I suggest Adobe Premiere Elements.
    For the record, you can't apply an effect to anything in After Effects until you have selected a target layer in the timeline.  This functionality is true of any video editing or compositing software I can think of,

  • How can i use adobe design trial? i was sucess to install adobe download assistant

    how can i use adobe design trial? i was sucess to install adobe download assistant

    After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
    Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_

  • Please help?How can i use photoshop cc??trial version

    how open to draw?
    How can i use photoshop cc??trial version

    Your question is at best vague. You need to explain properly what it actualyl is you are having problems with. does the program not run? Does it not install? Do you not know how to use it? What else?
    Mylenium

  • How can I use the WebDynpro tutorial  template in APAB workbench?

    Hi,
    I have downloaded the tutorial template zip file from sdn (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/tutorial on creating trees in web dynpro - 12.htm), but I don't know how to use it in ABAP workbench.
    Is that only for Java environment and can be used in Eclipse?
    If not, How can it be used in APAB workbench?
    Thank you.
    Swee Hu

    Hi,
    Its a template used in NDS(NetWeaver Developer Studio),in Webdynpro perspective.
    what do u mean by how can i use it in ABAP workbench?
    Sorry u cant use tat existing template.
    if u need the same feature u have to develop ur own...:)
    Regards,
    Sirisha.R.S

Maybe you are looking for

  • Images edited in PSE10 and saved as Jpegs open up too dark on the desktop. OS is windows 7.

    Hi I have a new Laptop runnings Windows 7 Home Premium. I installed PSE10 this week. I uploaded scans of my artwork and I resized them and adjust the blue colour (by only one click/ or 1 shade of blue.) I saved the image as a Jpg - high. It opens up

  • Thunderbolt to hdmi audio inconsistent

    I have the macbook pro 2010 i7 2.66G 15" with 8g ram osx 10.9.2 connect the thunderbolt to hdmi adapter, video is perfect, but the audio quality is inconsistent, the way I set it up, turn on the samsung tv to hdmi input source turn on the macbook pro

  • How to set a DFF Field as a mandatory field dynamically (Forms 4.5)

    For example i need to set one field (in DFF) as mandatory for some order types in the standard order entry screen. I tried set_item_property('ORDER.ATTRIBUTE1',REQUIRED,PROPERTY_TRUE); but i a mgetting error as " can not set ORDER.ATTRIBUTE1 of NULL

  • BDC for AS02

    Hi, We want to make a BDC of T. Code AS02 (Change Asset).. In it, i want to change DepKy (Depreciation Key) - 0000 from any existing under Depreciation Areas Tab..but it is giving some error "Enter depreciation key with depreciation by days".. What c

  • GR done in backend - how does this go to SRM

    Hi all. SRM 4.0, backend SAP 4.6C. When creating the goods receipt directly in the backend via either MIGO or MB01, what is it that updates the History of the PO in SRM? I actually thought that either CLEAN_REQREQ_UP BBP_GET_STATUS_2 did this, but I