How can I use Pinnacle break-out box to capture in CS5
A colleague uses Pinnacle's break-out box to capture analog video directly through CS4, bypassing Studio.
I have CS5, and bought Pinnacle Studio 14.
But when I open CAPTURE in CS5, I get a "capture device offline" statement. Anyone got any ideas?
CL
Or...
Old forum message, message now gone, but here's the summary - I have not used, only made note of the product "Matt with Grass Valley
Canopus in their tech support department stated that the 110 will suffice for most hobbyist. If a person has a lot of tapes that were
played often the tape stretches and the magnetic coding diminishes. If your goal is to encode tapes in good shape buy the 110, if you
will be encoding old tapes of poor quality buy the 300"
http://www.grassvalley.com/products/advc55 One Way Only to Computer
http://www.grassvalley.com/products/advc110 for good tapes, or
http://www.grassvalley.com/products/advc300 better with OLD tapes
Or ADS Pyro http://www.adstechnologies.com
ADS Pyro $120 http://www.bhphotovideo.com/c/product/462759-REG/ADS_Technologies_API_557_EFS_PYRO_A_V_Lin k_with.html
Pyro has low rating @Newegg and low at BHPV
Below said... I have the ADS Pyro AV Link and it works flawlessly and it bypasses MacroVision
http://forum.videohelp.com/threads/275966-Is-Canopus-50-55-100-110-REALLY-god-s-gift-to-th e-VHS-capture-universe
ADVC55 $159 http://www.bhphotovideo.com/c/product/312315-REG/Grass_Valley_602005_ADVC_55_Analog_to_Dig ital.html
ADVC55 has higher ratings at BHPV with very few low ratings and also high rating @Newegg
Next Article said Liked the ADVC55's picture quality the best
http://www.macworld.com/reviews/product/406056/review/advc55.html
Similar Messages
-
HT5622 Why can't I use my Apple ID to iTunes? How can I use it with out credit card?
How can I use my Apple ID in iTunes with out credit card?
For me it's the same, I've just bought an iPad mini two weeks ago but I cannot log in with any Apple account in FaceTime.
I enter my apple account in faceTime, then I press next the second screen and it shows "validating..." but it never gets validated.
What's happening? This is really annoying -
How can I use control break statement in my requirement
Hi ABAPers,
In my requirement, I have 4 fields in sorted internal table, (audat, prdha, ipnum, netwr). In that i need to do summation of netwr field falling under same prdha(BU) for the same month
internal table fields :
audat prdha ipnum netwr
02 abc 1 100
02 abc 2 200
02 xyz 3 300
03 abc 4 100
03 xyz 5 300
03 xyz 6 200
i need output like this:
audat prdha ipnum netwr
02 abc 1,2 300
02 xyz 3 300
03 abc 4 100
03 xyz 5,6 500
Can anyone suggest me logic for this by using control break statements
Thanks in advance,
Ankita
Moderator Message: Duplciate Post.
Edited by: kishan P on Apr 14, 2011 3:03 PMHi ABAPers,
In my requirement, I have 4 fields in sorted internal table, (audat, prdha, ipnum, netwr). In that i need to do summation of netwr field falling under same prdha(BU) for the same month
internal table fields :
audat prdha ipnum netwr
02 abc 1 100
02 abc 2 200
02 xyz 3 300
03 abc 4 100
03 xyz 5 300
03 xyz 6 200
i need output like this:
audat prdha ipnum netwr
02 abc 1,2 300
02 xyz 3 300
03 abc 4 100
03 xyz 5,6 500
Can anyone suggest me logic for this by using control break statements
Thanks in advance,
Ankita
Moderator Message: Duplciate Post.
Edited by: kishan P on Apr 14, 2011 3:03 PM -
How can i use the TV out on mt 5600
I have a FX5600-vtd256 and I want to be able to use the TV out to go into my vcr but at the monent there is no video signal coming out of the card
do i need to set , install, or adjust something?AirPlay hasn't anything to do with sending audio over the optical connection to a receiver. AirPlay is the ability of an iPhone, iPad or iPod to send audio over wifi to an AirPlay enabled device such as the Apple TV. The Apple Tv is not able to send audio by Airplay.
There are a large number of users that have reported it is not possible to get audio over optical without having the TV turned on, on the other hand a small number have reported it is. It's therefore likely (although I haven't tested it) that whether it's possible or not depends on your TV. -
I currently have 30 + presets which I have generated in Bridge and when I open the same photograph in Lightroom 4 it appears that the inform from the preset has not come across bridge to appear in lightroom. What have I done wrong or missed?
Thanks for your assistance
PeterIf you read the metadata from the file into Lightroom you can then use that file's metadata to create a Lightroom Metadata preset.
You'll have to do it uniquely for each of your 30 presets but presumably still quicker than creating LR presets from scratch.
And probably best to do it on dummy files and check you've only got the metadata you want before saving it as a new preset..(or at least before applying the newly created preset.to many, many files!) -
How can I sort and break out a boxed set download
I recently downloaded one of iTunes' full compilations - various artists, 75 songs in total.
There was also an option to buy smaller sets of these at about 20+ songs per individual set, but I went for it all.
Maybe this is too anal, but I was hoping to burn the 75 onto audio CDs in their order/mix of the smaller sets that iTunes had offered. I don't see how I can do that since all I have is 75 songs added to my library on a certain date with no other useful identifier to help segregate them. The track listings and disk # listings apparently only refer to each song's original artist's album (not the iTunes compiled albums).
This box set isn't offered anymore - at least I can't find it (Valentine's Day - Complete Box Set) so I can't tell how the songs were broken out into their smaller sets.
Am I asking for too much, or is there a way to sort these in their intended order that iTunes had set up?
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HD
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HD
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HDI was mainly looking for an easier way of setting up separate playlists to burn the CDs and not have to select & drag individual songs myself manually. The way they're listed now in my iTunes library is alphabetically by song name, even if I sort by "Date Added".
As for their original order, I've seen iTunes sell compilations like these in subsets such as: "Starter Set", "From Deep in the Vault", "Rarities" or similar categories. If the Music Store had a sales reason to segregate them into specific albums, I assumed (incorrectly) that they would stay in their own 'Albums' once I downloaded them all at once.
Guess I'll just start dragging songs A thru Z over to new playlists and call it good. I appreciate the reply.
15 FP iMac 800mhz Mac OS X (10.3.9) 1gb RAM; 60gb intl/250gb extl HD -
How can i use my garanty out from the city that i bought my iPhone?
Hi, i was living in London, for arround 3 years i bought my iPhone 5 while i was living there, now i am in Peru (Lima) and my iPhone is not working propertly.
The mobile is not sound when some one i calling me, also when i receive a msge from whats app, facebook or bbm etc. I went to an iSupport here in Lime and they told me that apparentlly is a problem whith the sound botom on the left side, is not working. Becouse when they try to put it this one up or down nothing apear on the screen, it is suppose to show a bell whit a cross on the middle but this image never appear.
They also told me that the garantee is regional, so if i bought in London i have to put it in London.
I appreciate your coments as soon as possible.
Regards;
Juan E. Pereira
<Phone Number Edited by Host>Not London solely, but an iPhone sold in the United Kingdom will be be supported and serviced by Apple only in the United Kingdom or one of the other European Union countries (the EU is considered to be a single country for warranty/support purposes). You will need to take your iPhone to such a country or send it to someone you know there to get it services.
Regards. -
How can i use page break for every 5 records in sap scripts
on every 5 lines of records i have go for a new page so what is procedure to do this .if possible send me with coding .
Hi John..
this is the way..
IN THE PRINT PROGRAM...
DATA : V_MOD TYPE I.
loop at Itab.
V_MOD = SY-TABIX / 5.
IF V_MOD = 0.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING'
COMMAND = 'NEW-PAGE' .
ENDIF.
CALL FUNCTION 'WRITE_FORM'
ENDLOOP.
<b>reward if Helpful.</b> -
How can I use an external hard drive for capturing? I don't have enough mem
I'm new at this...I have a Powerbook G4 and not nearly enough memory for capturing a full size video. Is there some way to send it to an external hard drive- for capturing, then burn it in my laptop? Would that external hard drive have to have IDVD loaded on it?
Hi artdrake
Just to add to the already good advice posted above.
Another possible approach which works for me, assuming the ext. FireWire HD is large and fast enough (I recommend at least 120GB and 7200rpm) is to format the the ext. HD as stated above (journaled) and then clone your existing startup volume (using Carbon Copy Cloner) to the ext. Hard Drive. This will circumvent installing a fresh OS as well as all the iLife apps to the ext. device. You will simply make an exact copy of your laptops HD to the ext. volume. It takes me all of 30-40 mins. on my G4 system to do this procedure whereas installing everything from scratch may take several hours.
Click Here for example/s:
Once this is completed and assuming the ext. drive is connected securely via Firewire, Restart the computer while holding down the option key. Select the ext. FW HD. Once your G4 laptop is booted to external drive, use it as you would the primary drive. The only difference is that you now have plenty of room to capture to or to burn a DVD. This saves you from consuming much needed HD space on the G4 laptop plus it also serves as a fully operative backup hard drive for your G4.
Hope this suggestion works as well for you as it does for me. Feel free to post back with additional questions/concerns.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video) -
How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
Thanks
LindaJS can not interact with open dialogs in any way, unless it's a dialog
created in JS using the Dialog object.
On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]> -
How can i get my email out of the file box icon?
How can I get my email out of the file box icon? Sometimes I touch it by accident and the email message goes in there.
Another thing to try is renaming it with a .htm or .html extension.
If that doesn't work either, do you have any other files from your old system? In particular, if you have your old places.sqlite file, you could use that to overwrite your new places.sqlite (bookmarks+history) file. -
How can i get apps with out using credit card info because i do not have a card ?
how can i get apps with out using credit card info because i do not have a card ?
Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud. -
I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?
for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone -
How can i use query in Print out
I am going to insert some Item's properties to print out of good issue, I dont know how can I use query in this tools?
Hi,
Please go through the following documentation on the service market place under the landing pages for
cross topics:
https://sapneth1.wdf.sap.corp/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000437965&_OBJECT=011000358700003137952006E&_SCENARIO=01100035870000000183&
Regards,
Abhinav Banerjee
SAP Business One Forums Team. -
How can i use multilist box in
How can i use multilist box in order to fetch parameters from user ex
selection-screen begin of block blk1.
parameter : s_maktx like makt-maktx,
p_maktx(18),
s_werks like mard-werks,
s_lgort like mard-lgort.
selection-screen end of block blk1.
I want to make p_maktx as multiselection control.declare like
select-options : s_werks for mard-werks no intervals .
or if you want to have range then .
select-options : s_werks for mard-werks .
reward if helpful
Maybe you are looking for
-
How do i set up my eprint on my ipad so that im able to print?
how do i set up my printer on my ipad so im able to print?
-
I have no audio from my iPhone 5 except for the ringtone. Wondering why. Hellllllllllp!
-
Calling bounded task flows imported as ADF libraries
Hello, I have a main application referencing many bounded task flows included in ADF libraries. Is there a way to make the application not throwing exceptions if one of these libraries including the called task flow is not found? The first question i
-
JMS Adapter binary conversion error
I am getting an MQ message. The message has / embedded when it is picked by JMS Adapter. Because the message content has /, JMS is stripping the message. Is there anyway to get the whole message into XI from JMS without the message getting stripped.
-
RAC interconnect using UDP - default ports?
Is there a default port used by each cluster member to listen for connections over UDP? We use IPTABLES firewalls on our hosts, and I need to ensure the cluster heartbeat traffic gets through the firewall properly. Thanks in advance. Jeff