How can I use puzzle effect with Photoshop CC?

I couldn't figure out how to use the puzzle effect with Photoshop CC... Can someone please help me million thanks

Photoshop Puzzle Effect

Similar Messages

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

How can i use 3D Features with 256 VRAM

How can i use 3D Features with 256 VRAM

Well, in theory you *could* install Photoshop CS6 version 13.0 and not update it.
Is your video card replaceable? They don't cost that much.
-Noel

How can I use an iPad with two itunes accounts?

How can I use an iPad with two itunes accounts?
Hi there
My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
How do I do this please?
I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
Any advise please?
Thanks

You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
It's not meant to be a multiple user/multiple ID device.

How can i use text expander with the new Mavericks,

how can i use text expander with the new Mavericks,

I regret upgrading to mavericks for the same reason
ftamez wrote:
how can i use text expander with the new Mavericks,
Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

How can i use "icloud backup" with ios 4.2.1?

How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

You cannot.
It requires ios 5.
Your iphone can only go to 4.2.1

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

How can I use 3D function in Photoshop CS6 (student package)?

Please let me know how can I use 3D function in Photoshop CS6 (student package)?
Thanks,

Thanks so much for your helpful reply.
Now I' ve already installed Adobe Creative Suite 6 Production Premium (Student Package), Extended included. But when I open Photoshop CS6, there' s still no 3D function in menu bar.
Would you please tell me how to activate this function?
Thanks,

How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

How can i use MS word with MAVERICK

how can i use MS word with MAVERICK? None of the MS Office applications work with new IOS!!!

What version of Microsoft Office Mac are you running? You probably just need to update it to the latest release:
http://www.microsoft.com/mac/downloads?pid=Mactopia_Office2011
Office 2011 Mac's latest version is 14.3.8 for instance.

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

How can I use Local SPAN with RSPAN ??

How can I use Local SPAN with RSPAN ??
I want to mirror traffics from ISP-A and ISP-B to Anomaly-detector module.
so I had configured like this...
C6500-A
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
monitor session 20 destination anomaly-detector-module 3 data-port 1
monitor session 20 source remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
C6500-B
vlan 1000
name RSPAN
remote-span
monitor session 10 source interface Gi5/1 - 2 rx
monitor session 10 destination remote vlan 1000
interface GigabitEthernet1/13
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1000
switchport mode trunk
no ip address
end
but it was not working..
it wasn't any change of input packet hit count when
I'd enter a command 'show anomaly-detector module 3 data-port 1 traffic'
was upper configuration wrong..?
Can I use VACL configuration ?

try to change "monitor session 10 destination remote vlan 1000 " to "monitor session 10 destination anomaly-detector-module 3 data-port 1 " on C6500-A

How can i use jpg extension with forms 10g and webutil

I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
image jpg and image item has no jpg extension .
How can i use jpg extension with forms 10g and webutil ?

You can use the JFIF image format for jpg files.

How Can i use Html frames with simple JSP???

How Can i use Html frames with simple JSP???
Actually i am creating an application in which i have used Index.html as frame.
Noew i am trying that if i click on a link of one frame(say menu frame) the \result shoul come to some other frame(say frame named mainwindow).
Hoe can i do like this???
Anand Pritam

Well i am using..
< Base target="mainwindow">
But it is no working is there some other way??

How can I use the ScrollTablePane with kodo ?

How can I use the ScrollTablePane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.

Marco-
I am not familiar with any "TableScrollPane" classes. Can you clarify
whether this is some 3rd party custom component, or something you have
written?
Note that we do not provide any pre-build graphical data components with
Kodo, but we do intend to provide some examples in the future.
In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
>
How can I use the TableScrollPane with kodo, taking a result Query as
a Collection and throw it into the ScrollTablePane , if it not possible ,
Is there a Component which I can do it ?
Thanks , Marco Aurelio.--
Marc Prud'hommeaux
SolarMetric Inc.

How can I use puzzle effect with Photoshop CC?

Similar Messages

Maybe you are looking for