How can I use retentive memory?

I need to make a report of good/bad parts in daily an mothly basis, I want to put this data on a indicator but a dont want that this value get lost went the operator turn of the machine at the end of the shift. Does anybody knows how can i use some retentive variable? or other solution?

This is pretty comnonly done with saving the values to an ini file. A more professional version would be saving to a network database so everyone could have access to the information at any time and without needing to run your program.

Similar Messages

How can I use my Zen Xtra like a flash memory

Hello, I want to know how can I use my MP3 player like a flash memory.
I have one and if I conect it with other computers I can't transfer documents and with a flash memory I conect it in all the computers with Windows XP and all of they detect the flash memory and they can transfer documents.
With my Zen Xtra I connect it and the computer detects it but I can't transfer anything because the computer doesn't have the software.
My question is.. Do I have to install the software in all the computers that I use ? or there are other forms to conects PC and MP3 Player? ( I want to transfer documents like text, image, etc)

But some MP3 players do that, why this one can't be connected with all the computers ?
Message Edited by morfo on 0-22-2005 05:54 PM

I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

Thank you KiltedTim!
YES, that is the free 5GB icloud memory for each apple ID. Can I not add the free 5Gb of my second Iphone to my original apple ID (5GB also) as I want to use one Apple ID name on both 2 Iphones? Is it necessary to have a different apple ID for the second Iphone to avail the free 5GB it carries with it?

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How can I use XSQLRequest for processing in-memory XMLDocument

How can I use class XSQLRequest for processing in-memory XSQL?
What should i pass in URL parameter value for constructor XSQLRequest(XMLDocument p0, URL p1)?
Could you write the some examples?

Here's one example of doing this:
String xsqlPage = "<page connection='demo' xmlns:xsql='urn:oracle-xsql'>"+
                  " <xsql:set-page-param name='username' value='{@u}'/>"+
                  " <xsql:set-page-param name='password' value='{@p}'/>"+
                  " <xsql:query bind-params='username password'>"+
                  "    select 'Authenticated' from dual"+
                  "    where 'SCOTT' = UPPER(?) /* username */"+
                  "      and 'TIGER' = UPPER(?) /* password */"+
                  " </xsql:query>"+
                  "</page>";
DOMParser d = new DOMParser();
d.parse( new StringReader(xsqlPage));
XSQLRequest req = new XSQLRequest(d.getDocument(),null);
StringWriter sw = new StringWriter();
PrintWriter errors = new PrintWriter(sw);
Hashtable h = new Hashtable(2);
h.put("u","scott");
h.put("p","tiger");
req.process(h,output,errors);
output.println(sw.toString());

I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos?

I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos? I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.

Hey there TowneJ,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
So long,
-Jason

How can I use same iTunes on iPad 64GB and iPhone 5 16 GB memory

How can I use same iTunes account on iPad 64GB and iPhone 5 16 GB memory

Just connect them your computer. iTunes will treat each device separately. Or if you mean iTunes Store account, you can choose what you download to each device, either directly from the iTunes Store or in synching from iTunes on your computer, as long as you don't have automatic downloads turned on.
Regards.
Forum Tip: This forum is for questions about using iPads in companies and organizations. Questions about the general use of iPads will normally best be posted in the Using iPad forum.

How can I use Microsoft Access on my Mac?

How can I use Microsoft Access on my Mac Pro?

Welcome to Apple Support Communities
Microsoft Access isn't available for OS X, so you can't use it. If you need it, you have to install Windows on a virtual machine.
On a virtual machine, you can install the Windows version you most like and the Access version you need, so you won't have any problem using it. You just need a full Windows version with its DVD or ISO image and product key, and an application like Parallels, VMware Fusion or VirtualBox to create the virtual machine. If you want to save money, System Builder versions are cheaper and you can find them at Amazon or NewEgg.
As you have a Mac Pro, I suppose you won't have any problem using a 64-bit version, but it's important you have enough memory. Open  > About this Mac, and check how much memory you have. I recommend 4 or 8 GB of memory at least.
After installing Windows on the virtual machine, you will be able to install Access there.
There are applications for OS X that allow you to run Windows applications without having to install Windows. Those apps often fail, so I don't recommend you to use them

How can i use my tv as the 2nd monitor

hi, how can i use my tv as the 2nd monitor, for example pull a video from desktop to tv for windows7, the computer is hp omni 120 all in one. because i have a cable for it that connects to the tv but i dont know how to connect the pc to the tv. i tried to go on the 'change screen resolutions' but that didnt help. thanks

Hi,
Here is it specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03343048#N1221
You can only see:
Front:
1 - Screen area
2 - Microphone array
3 - Webcam camera
4 - Stand
5 - Speakers
Back:
1 - Optical disk drive (actually right)
2 - Stand
3 - Kensington lock slot
4 - Power button
5 - Memory card reader and other I/O on left side
6 - Motherboard back I/Os (specific I/Os are model dependent)
7 - Activity indicator
8 - Power connector
9 - LAN (ethernet)
10 - Four USB 2.0 ports
11- Audio port (actually left side)
Left:
1 - Hard drive activity indicator
2 - Memory card reader activity indicator
3 - Memory card reader
4 - Two USB 2.0 ports
5 - Microphone jack
6 - Audio port
Right:
1 - Optical disc drive
The only hope is "6 - Motherboard back I/Os (specific I/Os are model dependent)" area:
Please check area 6 above. As mentioned in my previous reply: Most likely your machine has no video out port.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

How can I add more memory to my iPad?

How can I add more memory to my iPad?

Memory refers to RAM, and can't be increased.
I asume you mean storege space (like 16GB, 32GB, etc). It also can't be increased.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

How can I use a progress bar in objective c mac

How can I use a progress bar in objective c mac? I have a code that downloads a file and I want to be able to let the progress bar increase by 1. A bit further on the code (to download the file) it needs to increase again. And so on...
My code
-(IBAction) downloadButtonPressed:(id)sender;{
    //get the path to the image that we're going to download
    NSURL *url = [NSURL URLWithString:@"https://www.dropbox.com/s/l6o07m48npxknt4/Cluedo.zip?dl=1"];
    //get the path to documents folder where we're going to save our image
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *DocumentsDirectory = [paths objectAtIndex:0];
    NSString *filePath = [DocumentsDirectory stringByAppendingPathComponent:@"Cluedo.zip"];
    //Download the file to memory
    NSData *data = [NSData dataWithContentsOfURL:url];
    NSError *error = nil;
    //Save it on the Documents directory
    [data writeToFile:filePath options:NSDataWritingAtomic error:&error];
    NSFileManager* fm = [NSFileManager defaultManager];
    NSString* zipPath = filePath;
    NSString* targetFolder = @"/Applications"; //this it the parent folder
    //where your zip's content
    //goes to (must exist)
    //create a new empty folder (unzipping will fail if any
    //of the payload files already exist at the target location)
    [fm createDirectoryAtPath:targetFolder withIntermediateDirectories:NO
                   attributes:nil error:NULL];
    //now create a unzip-task
    NSArray *arguments = [NSArray arrayWithObject:zipPath];
    NSTask *unzipTask = [[NSTask alloc] init];
    [unzipTask setLaunchPath:@"/usr/bin/unzip"];
    [unzipTask setCurrentDirectoryPath:targetFolder];
    [unzipTask setArguments:arguments];
    [unzipTask launch];
    //[unzipTask waitUntilExit]; //remove this to start the task concurrently

Your code really isn't suitable for a progress bar, not a real one anyway. Your code will spend about 99.9% of its time in the method "dataWithContentsOfURL:url". That is not a method you want to use in the real world. It is only for demos or proof of concept exercises. All network operations should be asynchronous. That gives you the ability to gracefully recover when there is a failure and also to do fancy things like display a progress bar and tell the user when the download is complete.
Once you get the asynchronous download logic working, then you can worry about the progress bar. The first thing you will need is the size of the file. Without that, all you can ever do is an indeterminate progress bar or spinner. If you have the size of the file, then you can keep track of how much of the file you have downloaded and update your progress bar with the percentage complete. Make sure to throttle it to no more than incrementing by 1% at a time. Otherwise, a large file or a file transferred in many small chunks, would waste too much time updating the progress bar for no change.

How can I use Automator to extract specific Data from a text file?

I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE    memory (+                68 range fill )
16 789
bytes of DATA    memory (+    59 absolute )
1 875
bytes of XDATA   memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

How can i use C/Javascript/php/Java in flex?

can i embed these language into my flex project?
since i have to check harddisk space, free memory remain. Also, i need to check the pixel of photos before the photos becoming bitmapdata
please help~

saipanBETTY0509 wrote:
Subject: How can i use C/Javascript/php/Java in flex?
can i embed these language into my flex project?
You can't. Why do you want to do this?
saipanBETTY0509 wrote:
since i have to check harddisk space, free memory remain. Also, i need to check the pixel of photos before the photos becoming bitmapdata
I think what this means is "I want to check to see how much hard disk space is available. Also, I need to check the pixel dimensions of an image."
Is that right?
There is no way in the Flash Player (as far as I know) that you can determine the amount of free disk space. However, in AIR you can use air.File.applicationStorageDirectory.spaceAvailable to determine the storage space available in the application storage directory.
As far as determining the dimensions of an image, there are plenty of good resources out there on that. Maybe this one will be helpful to you?
http://www.yswfblog.com/blog/2008/12/22/flash-10-experiments-the-warholizer-loading-and-pr ocessing-local-images/
-Josh

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

How can I use retentive memory?

Similar Messages

Maybe you are looking for