How can I use rfc in sap r3 4.71?

Hi.
I want to create a function in sap r3 4.71, and call this function from another system.
example: I call this function with one parameter "john" from another system, the function in r3 receives this parameter and save this value to database, after that return "Hello John".
How can I write this sample in R3 4.71, do you have sample?
I saw BC415, it describes some RFC functions, but I can not understand completely. after I write this function how can I return a value? how can I save the record to the database?
Below is the content.
SELECT * INTO TABLE PT_FLIGHT FROM SFLIGHT WHERE
CARRID = P_FIRST AND CONNID = P_SECOND.
Thanks.

Hi.
I followed your suggestion to references the rfc programming in abap.pdf.
I try to use third party tool(bea iway adapter), to connect sap r3 via the rfc, the below error occured.
The authentication credentials are not valid. Verify that the values for Client Number, User, and User Password are correct.
This exception deals with the permissions settings in your authorization profile. Check with your Basis administrator to ensure that your user has access to RFCSYST in your authorization profile.
Which part need I check, how can I fix it?
Can you help me to write a function sample for me, which support save record data to database and return a value?
Cause I'm new in abap, if there's a sample for reference, it will very helpful to start.
Thanks.

Similar Messages

What is ARIS Tool? &How can we use it with SAP MM module implementaion?

Dear Friends /Consultants /Seniors of the SAP forum,
1.What is ARIS Tool?
2.What is the purpose (actual need) of this tool? And is it useful to SAP MM
Consultant during the SAP Implementation? or support? or rollout? or upgrade?
3.For which Business Process SAP Implementation, this Tool (ARIS) can be implemented? ( I mean for which industry sector this tool can be implemented or used)
4.Pls explain any business Senario using this ARIS Tool for SAP MM module implementation...
5.Is this a thirdparty tool, or who's product it is?
6.Being a SAP MM Functional Consultant, how can we utilize it during the SAP MM Implementation.
Pls do the needful,
Regards,
Srinvias.K
Message was edited by:
        sapsrin

ARIS - stands for ARchitectur Integrated Systems.
This is proprietary tool fof IDS Sheer AG,
In layman's words we can say its a tool create Flow charts.
In business we don't say these as flow charts but as EPC chains.
EVENT PROCESS CHAIN
This is a Designing tool of any kind of activity,from 4.6b ( i guess) SAP has Plug in to ARIS tool even.
For eg: If i wanna go and buy Sandwich,eat and come back to home.
its vey simple to say but if you map this in EPC.. there are lot of things come in picture.
steps
1) I get up from desk
2) Walk out of thehouse
3) Start my car
4) drive my car to XX place
5) I buy sandwich
6) Should i eat or carry out
if eat - pay for it
     look for vacant seat
     eat sandwich
      get out towards car
      drive back to home
If Carry out
Pay for it
get out towards car
drive back to home
Eat sandwich...
it still depends on how micro level control you need .
for eg: in the above process we can also include
1) pick up my car key
2) Wear shoes etc etc....
Basic aim of this tool we donot miss any event ,and to have standard predefined process flow.
If some one has better answer, please let me know.
Satheesh

How can I use Seeburger java functions on SAP XI's user defined functions?

Hi All,
As my title implies; how can I use Seeburger java functions on SAP XI's user defined functions? I've tried searching over the net in tutorials regarding this topic but I failed to find one; can someone provide me information regarding my question? thanks very much.
best regards,
Mike

Hi Mike !
You should check your documentation about which java classes you need to reference in the "import" section of your UDF. And also deploy the java classes into the java stack or include them as a imported archive in integration repository...it should be stated in the seeburger documentation.
What kind of functions are you trying to use?
Regards,
Matias.

How can I use this RFC function

I just wanna create a monitor as same as TCODE ST06
so
I Added a TextBox, a Button and a DataGrid. and then everything has finished.as same as following step for "RFC_CUSTOMER_GET" from SAP connector 2.0 help
but how can I use the function? (VB.net 2003) I debugged the function in SE37 the function only need 1 parameters
so,I scratched some statments... but it is still not correct
        Dim num1 As Integer
        Dim dst As CPUSAPUSAGE.CPU_SINGLETable
        Me.SapProxy11.Get_Cpu_Single("local", "", num1, num1, num1, num1, "", num1, num1, num1, num1, dst)
please tell me details steps
Thank in advance.
Yi
Create a Windows Forms application.
Add an empty SAP Connection class with the ABAP functions
RFC_CUSTOMER_GET and RFC_CUSTOMER_UPDATE.
Leave the proxy designer open. Go to the SAP Proxy toolbox and drag the Proxy field icon to the designer.
Rename the new Field1 to Tab. Change the Type property to BRFCKNA1Table. To do this, use the drop down icon.
Note that the ReadOnly property automatically changes to true and the default value changes to new BRFCKNA1Table().
Add a second Proxy Field with the name Filter, the type String and the default value A*.
Select the Rfc_Customer_Get function and click on the button of the Parameters property.
Set the default values of the three parameters with the drop-down icon as follows:
Name1: Filter
Kunnr: Customer_T: _Tab
Save the proxy designer and switch to your Windows form. Add a TextBox, a Button and a DataGrid.
Add an instance of your SAP proxy to your Windows form, add a Destination and set the Connection property as described in A4.
Set the DataSource property of the datagrid to sapProxy11. Set the DataMember property of the datagrid to Tab. Alternatively you can set the DataSource to sapProxy11.Tab and leave the DataMember empty.
For textBox1 use the DataBinding feature to bind the Text property of the textbox to sapProxy11.Filter.
Double-click the button to create an event handler and add a single line:
this.sapProxy11.Rfc_Customer_Get_();
You are using sapProxy11 as a smart DataSet that contains the necessary state. You bind the state to the corresponding controls. The overload method Rfc_Customer_Get_() does not have any parameters, as the required state is already in the bound Proxy Fields.

Dim dst As New CPUSAPUSAGE.CPU_SINGLETable

How can i use the subitem in SAP PR Item ( like 1,1.1,1.2,1.3,2,2.1,2.2,2.3

Dear Experts,
how can I use the subitem in SAP purchase requisition Item ( like 1,1.1,1.2,1.3,2,2.1,2.2,2.3,3,3.1,3.2,3.3,4,4.1,4.2,4.3,5,5.1...)?
Could you please tell me how can i configure Item Number Interval in SAP purchase requisition ?
Best Regards,
Merry

The purchase requisition item number is a numeric, it can not contain anything except digits.

How can I use propertiers in workflow-task like "sap.bc.bmt.wfm.groups"

Hello Friends,
i'm hoping you can help me with this question:
- How can I use the properties in the task definition of a workflow?
- And what can i do with it?
At http://help.sap.com is a very low level documentation.
Best regards,
Christian

Answered myself.
Thanks
Christian

How can i use SAP R3 (se11) structure in SAP XI

hi,
how can i use SAP R3 (se11) structure in SAP XI?
is it possible.?
Edited by: ruban R on Apr 1, 2008 6:14 PM

HI raj,
I am sorry...I think...i did not say clearly..
I mean I am not talking about transaction.
I want to import/use that (se11) SAP R3 structure into my data type/message type (example) in SAP XI..is it possible?
I do not have any save option if i open any structure in SAP R3 in se11.... Example: mara_cSAP XI
how can i use that mara_c str. in SAP XI.?

Do we need to create a bapi, badi and how can I use them

Hi all,
Please write me about the topics at subject.
Will I use BAPI with Java or C# or VB, whatever...
And for example for what I will use BADI.
Could you provide me code sample to use these?
Thanks.

Hi,
BAPI stands for Business API(Application Program Interface).
I have answered this question before..
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
for VA01 use BAPI_SALESORDER_CREATEFROMDAT2
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
BADI(Business Add-In) is the object oriented method of user exits...
Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Regards,
Raj.

How can I use table control to enter data

Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.

Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards,

How can I use the WebDynpro tutorial template in APAB workbench?

Hi,
I have downloaded the tutorial template zip file from sdn (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/tutorial on creating trees in web dynpro - 12.htm), but I don't know how to use it in ABAP workbench.
Is that only for Java environment and can be used in Eclipse?
If not, How can it be used in APAB workbench?
Thank you.
Swee Hu

Hi,
Its a template used in NDS(NetWeaver Developer Studio),in Webdynpro perspective.
what do u mean by how can i use it in ABAP workbench?
Sorry u cant use tat existing template.
if u need the same feature u have to develop ur own...:)
Regards,
Sirisha.R.S

How can i use a Property as Link in the Resource Renderer Setings

Hi to all,
i have created a Propertry with the name SFS_NewsLink.
The content of this Property is
http://<server>.<domain>/path/sitemap
Now, how can i use this property in the Visible Propertis? i dont will use use the default "contentLink" i will use as Link the content from the SFS_NewsLink.
how can i do this? have envery one any ideas?
Best Regards
Thomas

Hello Thomas,
You can modify your Collection Renderer and Resource Renderer to achieve this functionality.
Check this weblog, to get ideas:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3648
Greetings,
Praveen Gudapati

How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.

how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.

How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b>

How can i use query in Print out

I am going to insert some Item's properties to print out of good issue, I dont know how can I use query in this tools?

Hi,
Please go through the following documentation on the service market place under the landing pages for
cross topics:
https://sapneth1.wdf.sap.corp/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000437965&_OBJECT=011000358700003137952006E&_SCENARIO=01100035870000000183&
Regards,
Abhinav Banerjee
SAP Business One Forums Team.

How can we use mode "UsePDF" in Interactive form?

Hello everybody,
I want to know that how can i use the mode usePdf in Interactive form?
My scenario is:
I have pdf form saved locally with blank fields.
I save this file after requied values in all fields.
Now i want to import this pdf file in interactive form and needs to submit this form so all the data in this pdf file are submitted to the System.
How can i do this?
regards,
Bhavik

Hi Bhavik,
you do not need to use the upload ui element, if your pdf-file which you want to upload resides in you web application project. In the following you can find Web Dynpro code snippets I use in one of my demos for displaying an uploaded pdf-file:
wdDoModifyView method of FormView:
    //@@begin wdDoModifyView
     try {
          // get interactive form element by ID
          InteractiveForm form = (InteractiveForm) view.getElement("Evaluation");
          if (wdContext.currentContextElement().getCurrentMode().equals("usePDF")) {
               form.setMode(WDInteractiveFormMode.USE_PDF);
     catch (Exception e) {
          e.printStackTrace();
    //@@end
onPlugFromUploadView method of UploadView:
    //@@begin onPlugFromUploadView(ServerEvent)
     try {
          // modify the context and set needed attributes
          wdContext.currentContextElement().setCurrentMode( "usePDF" );
          // extend the attribute "pdfSource" from the context to a modifiable binary type
          IWDAttributeInfo attInfo = wdContext.currentContextElement().node().getNodeInfo().getAttribute("pdfSource");
          ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
          IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) type;
          binaryType.setFileName("evaluationForm.pdf");
          binaryType.setMimeType(WDWebResourceType.PDF);
          // add the generated pdf to the context
          wdContext.currentContextElement().setPdfSource( evaluationForm ); // byte[] evaluationForm
     catch (Exception e) {
          wdComponentAPI.getMessageManager().reportWarning(e.getLocalizedMessage());
    //@@end
If you do not want to display the data before submitting the data, then you have to use the WDInteractiveFormHelper class for extracting the form data after upload in the context. This class is available since NetWeaver04 Support Package Stack (SPS) 10. The class com.sap.tc.webdynpro.clientserver.adobe.api.WDInteractiveFormHelper contains at the moment one helper function for PDF document. Here are the details:
Constructor Detail
public WDInteractiveFormHelper()
Method Detail
public static void transferPDFDataIntoContext(byte[] pdfSource, IWDNode targetNode)
Method transferPDFDataIntoContext extracts data from a PDF document and copies the values into the Web Dynpro Context. The xml structure of the document data is applied starting from the specified target node. Usually, this node should be the same context node to which InteractiveForm-UIELement property dataSource is bound during PDF generation.
Parameters:
pdfSource - PDF document as byte[]
targetNode - target IWDNode
Hope this will help you,
Regards, Carsten

How can i use exisitng user data(Id, password) for user mapping

Hi All,
For User mapping , we can import user mapping data for many users from user administration. and for each user
we can maintain mapping data in the standard format.
eg:
[User]
uid=user2
$usermapping$:BCE:user=ext_user2
$usermapping$:BCE:mappedpassword=password
i am clear till this point.
this all works if we know the userid and passowrd on the system 'BCE'.the passwords on the system 'BCE', are encrypted . so there is no chance for me to know the passwords.
so how can i use the existed userid/passowrd on the system 'BCE' for the mapped user and mapped password on the portal while doing usermapping.
Thanks in Advance,
Lakshmi

Hi,
I think this should work.
1. Setup SSO with SAP logon tickets first. How to do this is described many places, e.g. http://help.sap.com/saphelp_nw04/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
This SSO will not work at first, because the username is different in the back-end system. So what you need to do is to get the back-end username into the ticket (don't need a password because that is done by the SAP logon ticket)
2. Create a portal component which uses the usermanagement API to create a usermapping which only consists of the username and a blank password. You can do this manually I think if you have no reference system defined.
IUserMappingService umap =(IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
//this is the currently logged in user. You might another user
IUserContext user = request.getUser();
//Get the existing data (think it can be null)
IUserMappingData userMapping=umap.getMappingData(systemAlias, user);
HashMap map = new HashMap();
                         map.put(IUserMappingService.UMAP_KEY_USER, backEndUserName);
//add blank password               map.put(IUserMappingService.UMAP_KEY_PASSWORD, "");
//store the values                    userMapping.storeLogonData(map);
Voila, this should allow you to do SSO using SAP logon tickets, but with another name that you use against the portal. I am uncertain if this will work if you have multiple usermappings in the sap logon ticket
PS since the sap logon ticket is issued at logon time, you need to relogon to get the changes done by the code
Regards
Dagfinn

How can I use rfc in sap r3 4.71?

Similar Messages

Maybe you are looking for