How can I use the Control Design & Simulation module in the Mobile (PDA) modul?
Hi everyone!
I have to create Bode and Nyquist plot from Transfer function on a PDA, but I can't use CD&S Modul when I'm opening a new Mobile project.
Thank you for your answer!
Sincerely yours,
Jenő Kocsis
Jenő Kocsis wrote:
Hi everyone!
I have to create Bode and Nyquist plot from Transfer function on a PDA, but I can't use CD&S Modul when I'm opening a new Mobile project.
Thank you for your answer!
Sincerely yours,
Jenő Kocsis
Does it have to any transfer function? Or is it some limitations
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Similar Messages
-
How can I use the button in one panel to control the other panel's appearing and disappearing?
How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle -
How can i use the amp designer or pedalboard for software instruments in garageband 10
how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x -
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
How can I use the Internet on MY I phone?
Don't understand.
Tap the Safari icon. You will be on the internet.
The iphone is designed to always have access to the internet.
What exactly is your issue? -
How can I use table control to enter data
Hi all,
I want to use table control to enter data, instead of using textboxes.
So that the user can enter many data at once and just click the save button at the end of the work, only one click.
How can I use the table control at this context?
Thanks.
Deniz.Hi deniz,
go through it:
/people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
Regards, -
How can i use the same front panel graph in more than one events in an event structure?
i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi 12 KB
graph and local variables.vi 12 KB -
How can I use the color adjustments interface that shows up for camera RAW on jpeg files?
How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?
Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.
-
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
How can one use Mission Control with two monitors? Please bring Spaces back
How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBBI use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous. -
How can i use activeX Control in labview?
how can i use activeX Control in labview?
please describe me step by step.
thanks.Well..that was quite helpful..but now I'm encountering certain problems. I've attached the VI I've made.
I don't need sound at the moment so I dropped it. (Although I tried to play it..but all I could hear was a very annoying sound.) Secondly I don't want to display any date or time..so i dropped that property too.
Now when I run this Vi...the webcam turns on, the screen of videocapx pops up..then the webcam light goes off..and another pop up appears saying..labview is not responding..and i have to close it reluctantly.
I haven't placed the stop capture property in this vi. i checked it by placing it too..but that doesn't work.
I would like to notify that my actual task is to acquire image and then compare it with another one already present on my pc. I want you to please help me out..solve my first query then I'll proceed with the latter part.
Attachments:
activexvideocaps.vi 20 KB -
i have 5gb of icloud storage, used 2.5gb but it wont let me unlock the other 2.5gb of storage. How can i use the remainig 2.5gb of storage?
I got rid of AMDS, ASU ,QuickTime and iTunes from control ones I also found folder in Vista with D:\Users\Rick\Music\iTunes\Previous iTunes Library and there is one dated 2009-03012.itl. I moved this file up one folder and delted existing iTunes Library.itl. iTune still failed to identify my iPhone. There are other files iTunes Library Extras.itdb, iTunes Library Geniyes,itdn and iTunes Music Library,xml date dtd 06/18/2009 after upgrade except the latter which is date 06/23/2009. So something is not allowing me to pull or put everything back to when it worked.
YES this is my only iPhone and only PC I have access to with iTunes.
Here is what Apple gave to someone Sunday 28 June:
http://discussions.apple.com/thread.jspa?threadID=2035950&start=75&tstart=0
I checked these out too and they appear the same printed out nearly a week prior. I agree with Coach TO, if I had bad drivers or Vista errors it would not have shown up only when I updated to latest Version of 8.2.023. My Phone was identified on a PC with iTunes at the local AT&T store. He suggested I get phone into Recovery made while connected to iTunes and that resolves the problem 9 out of 10 time. Weak spot was he tried to get phone into Recovery without iTunes connection and thought I may have iPhone problem, then changed his mind when it worked while connected. He also stated it could take an hour. I have not tried to put my iPhone in Recovery lately, I think I did a while back and it failed to go into Recovery as error "iPhone detected by, not identified..."Has anyone tried forcing phone into Recovery? I understand you may lose all that is on phone. If iTunes still fails to identify would we not be in worse shape even if iTunes holds a recent backup which it does not for many of us? Will Apple take back or exchange phone if yours is not identitifed, AT&T today told me I had to go to Apple Store for this or anything to happen. -
How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library
read this
https://discussions.apple.com/message/20429789#20429789 -
How can I use the print module to print different size images on one large "canvas"?
How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.
-
How can I use the QR codes with my iPad 2. do I need to download first an app ?
How can I use the/read the QR codes with my iPad 2 ? Do I need to download an app ?
Yes. There are quite a few available for free in the app store
-
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv
Maybe you are looking for
-
Hi Gurus........... i have my code below ...problem is that when it goes for the first time if get the value but when it goes again in to the loop , first loop is getting exected the second and the third loop returns sy-subrc 4 thou it has value.....
-
Hi, I need some help in choosing the best(most feature packed, fast etc.) MSI 865PE motherboard. There are two boards that are pretty identical and trying to find the difference between them has been difficult. They are the Neo2-FIS2R and Neo2-PFISR.
-
I received an email from [email protected] Subject: Email Feedback Report for IP (our email server's IP address) This is an email abuse report for an email message with the message-id of F07FB3A7-2B7C-4DD7-BD3B-D976E24D398D@(ourdomain).com received f
-
Error: FRM-40743 on a view based form - EBS
Hello, I have a form that requires DML operations. This form is an EBS form will run in an 11.5.10.2 environment and developed using 6i. I am getting following error persistently FRM-40743 - This operation with no base table requires the ON-LOCK trig
-
I cannot access my fonts menu. The drop down menu is blank box and snaps shut. I also have trouble with "save as" and file format...ie save as jpg...the drop down quickly snaps shut, I can often catch it after several tries but seriously lol. These i