How can I use the "create book" feature without having my album photo sequence altered

I have created an album with photos that are in a particular order for a reason.  I then process to create a book.  The template then rearranges all my photos.  Is there a way to keep them in the original order I set up? 

All the 5000 photos that reappeared after repair today were from my canada mega event, but for some reason it did not do it for all the other mega events.  It is a start but not complete.
Try the rebuild to recover more lost photos.
If "rebuild" with iPhoto does not recover more lost photos, rebuild with iPhoto Library Manager as described by Old Toad in this thread, but rebuilding with iPhoto Library manager will not recover your projects like cards, bilks, slideshows.
Re: iPhoto glitch with retained masters https://discussions.apple.com/message/26354337#26354337
Mostly the way I organize all my photos is that I make a folder for each country I visit.  i.e. New Zealand Folder, Canada Folder, India Folder; and at the same time, any photos that I import I delete directly from new imports and just keep the ones i want and then i go up to events and move the latest imported event into a mega event for that country and so they all get joined in a sense.
As a workaround, merge the events right after importing, before you start deleting photos.  And empty the trash always before merging projects.
You might consider to use albums instead of events for your country lists.   I simply use the events as basic containers. One event for each day of shooting photos. I found, that smart albums and searches are quicker in iPhoto and Aperture, if the events are smaller, also browsing is easier, if the events are not so large.
You can merge albums and remove photos from albums without the problems mentioned above.

Similar Messages

  • How can I use the hardware compare feature of the 6551 card to trigger scripts

    I can dynamically and seamlessly generate different waveforms by triggering different scriptTriggers that drive one or more of the 4 PFI lines. However, I need to evaluate a channel at a specific location or locations set by a script marker in real-time and generate a different waveform stored in on-board memory based on the result of the evaluation. I have attempted to use the hardware compare feature without any success. I am trying to dynamically respond to an I2C device based on the ACKs or NACK response of the device under test. Can the 6551 card accomplish this? Has anyone successfully tested an I2C or SMBus communication stream with 6551 card?

    Hello,
    I can understand why hardware compare did not work out for you application.  Hardware compare uses a signal that was generated to make a digital pattern and then waits a few clock cycles before acquiring the signal that needs to be compared to the digital pattern. 
    I would look into using a script trigger to evaluate the channel value, where the script structure controls when it is evaluated.  Please note that script triggers will need to be cleared after they are detected for reasserting.  Some script syntax actually clear the script trigger and then use a wait until script trigger structure.  Please refer to the HS DIO Help for documentation on Common Scripting Use Cases. 
    Please provide us with further details about your application.  The more information, the better!  I was not too clear on what you where wanting to evaluate and where is it coming from. 
    I would also like to mention that National Instruments has a NI USB 8451 which is capable of I2C communication.
    NI USB 8451
    Samantha
    National Instruments
    Applications Engineer

  • How can we use the table partitions feature and.........

    Hai friends when i tried to use the bitmap indexes and table partitions feature ,
    I got a message like this
    'table partiotion feature not enabled'
    so please tell me how can i enable those features so that i will be able to use those features..........

    Partitioning and Bitmap Indexes are features of Oracle Enterprise addition. In fact, I think that Partitioning is an extra option that needs to purchased with Oracle Enterprise - it is not a default feature.
    These features do not exist on Oracle Standard Edition (and likely Express Edition too).

  • How do I use the address book feature which allows you to connect your contacts to their social networking profiles? (in Lion)

    When I look up the 250+ new features of Mac OSX Lion, under address book, there's a new feature that interests me.
    "Address Book lets you quickly access the social network profiles for your contacts, including Facebook. Press and hold an email address to select the appropriate profile."
    Somehow I can't get it to work. What do I do?

    Make sure it's on the Template (see the entry for Twitter):
    Then update the contact with the relevant info.
    For Twitter you can then click and hold the Twitter tag to either View Profile or Send Tweet.
    Regards,
    Colin R.

  • How can I use the iPhone 4S with no SIM card?

    How can I use the 4s with
    no SIM card
    Just for photo and internet

    Using an iPhone without a wireless service plan - Support - Apple

  • How can I disable the "faces" recognition feature in iPhoto.  I don't use it and find it very annoying.  Thank you.

    how can I disable the "faces" recognition feature in iPhoto.  I don't use it and find it very annoying.  Thank you.

    I am afraid you will just have to ignore it.

  • How can I get the address book to sort by "Last" name (using v 31.3.0).

    After a computer crash, I had to load Thunderbird (v31.3.0) back into my machine running Windows 8.1, and I successfully imported my address book back up file into Thunderbird (v31.3.0).
    My problem is that I don't see an option to sort the address book by "Last" name, which was available with the version of Thunderbird I had before the crash.
    How can I get the address book to sort by "Last" name?

    In 'Address Book'
    Select address book
    'View' > 'Show name as' > 'Last/First'
    The you can sort by Name.
    Either click on 'Name' column header to change sort order,
    If reversed, then click on 'Name' column header again to reverse the order.
    Or
    'View' > 'Sort By' > choose 'Name' and 'Ascending'

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

  • How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

    With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
    Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
    Does anyone have a solution?
    Thanks in advance.

    Thank you very much. I'll be waiting for you message.
    Messaggio originale----
    Da: [email protected]
    Data: 26/01/2015 17.56
    A: "Umberto Gangi"<[email protected]>
    Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
    Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
         Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • How can I use the button in one panel to control the other panel's appearing and disappearing?

    How can I use the button in one panel to control the other panel's
    appearing and disappearing? What I want is when I push the button on
    one button . another panel appears to display something and when I
    push it again, that the second panel disappears.

    > How can I use the button in one panel to control the other panel's
    > appearing and disappearing? What I want is when I push the button on
    > one button . another panel appears to display something and when I
    > push it again, that the second panel disappears.
    >
    You want to use a combination of three features, a button on the panel,
    code to notice value changes using either polling in a state machine of
    some sort or an event structure, and a VI Server property node to set
    the Visible property of the VI being opened and closed.
    The button exists on the controlling panel. The code to notice value
    changes is probably on the controlling panel's diagram, and this diagram
    sets the Visible property node of a VI class property node to FALSE or
    TRUE to show or
    hide the panel. To get the VI reference to wire to the
    property node, you probably want to use the Open VI Reference node with
    the VI name.
    Greg McKaskle

  • How can I use the iPhone 4s as a usb drive?

    How can I use the iPhone 4s as a usb drive?

    I'm not sure about the original iPhone, I didn't have one, but the iPhone 3G did not have a disk mode feature.

  • How can I sync the address book from Mail to my Address book?

    Ok, I open a new message and click on the Address Book icon in the new message to find my contacts on the address book, I choose the group I am looking for and the group has people on it that I have already deleted from my address book! How can I sync the address book from Mail to my Address book?

    It is using the same database on disk. You may have to re-launch Mail.

  • To test how can we use the opt  'logical file name' to name the file based

    Hi Sir/Madam,
               to test how can we use the opt  'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.

    Hi Vishali,
    In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
    Rest of the process is same as that of extraction from local file.
    Regards,
    Durgesh.

  • How can I use the mousewheel to scroll forward and back in Safari?

    I really like Safari. As I see it, the only short coming is a feature that is present in Internet Explorer and Firefox. In both of these applications I can hold down a modifier key (CTRL) and roll the mouse wheel to go back 1 page in history. I would be really glad to know how to do this in Safari, as just about everything else I can do in IE and Firefox is in Safari. This roll back feature is one of the things I use more often than almost anything else.
    Question: How can I use the mousewheel to move backward in the browser history?

    Yes, I could move my hand from the mouse to keyboard to use a key combo... I could even use the delete key... but it's not really as effient as using the mouse's scrollwheel. Not that it's really all that bad, since Firefox is a great browser, but am I stuck with it if I want that one solitary additional feature?

Maybe you are looking for