How can I use the hardware compare feature of the 6551 card to trigger scripts

I can dynamically and seamlessly generate different waveforms by triggering different scriptTriggers that drive one or more of the 4 PFI lines. However, I need to evaluate a channel at a specific location or locations set by a script marker in real-time and generate a different waveform stored in on-board memory based on the result of the evaluation. I have attempted to use the hardware compare feature without any success. I am trying to dynamically respond to an I2C device based on the ACKs or NACK response of the device under test. Can the 6551 card accomplish this? Has anyone successfully tested an I2C or SMBus communication stream with 6551 card?

Hello,
I can understand why hardware compare did not work out for you application. Hardware compare uses a signal that was generated to make a digital pattern and then waits a few clock cycles before acquiring the signal that needs to be compared to the digital pattern.
I would look into using a script trigger to evaluate the channel value, where the script structure controls when it is evaluated. Please note that script triggers will need to be cleared after they are detected for reasserting. Some script syntax actually clear the script trigger and then use a wait until script trigger structure. Please refer to the HS DIO Help for documentation on Common Scripting Use Cases.
Please provide us with further details about your application. The more information, the better! I was not too clear on what you where wanting to evaluate and where is it coming from.
I would also like to mention that National Instruments has a NI USB 8451 which is capable of I2C communication.
NI USB 8451
Samantha
National Instruments
Applications Engineer

Similar Messages

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

How can I use word count without it counting the words in the end notes by default?

How can I use word count without it counting the words in the end?
Now I have to highlight the text to get a count.

I don't think that is possible, it does what it does.
Peter

How can I use my TimeMachine to back up the external hard drive

How can I use my TimeMachine to back up the external hard drive that is attached to my TimeMachine? I have the external drive attached to my TimeMachine via the USB port and want my TimeMachine to back up the files on the external drive, as it does for the files on my computer. How do I do that?

https://discussions.apple.com/message/16276201#16276201

How can I use my product code to get the serial code to active my dreamweaver?

My product contain 22 letters and numbers, it can't feet inside any code thing that I found, and I had already sent a email to let them send back the serial code to me, but it didn't. So I want to ask how can I use my product code to get the serial code so that I can active my dreamweaver?

I already in downloaded the thing, but I just have a product code, how can I install the product?

How can I use an apple id without visa or credit cards?

How can I use an apple id without visa or credit cards?

Choose the None (no credit card) option in the payment details.

How can i use a Property as Link in the Resource Renderer Setings

Hi to all,
i have created a Propertry with the name SFS_NewsLink.
The content of this Property is
http://<server>.<domain>/path/sitemap
Now, how can i use this property in the Visible Propertis? i dont will use use the default "contentLink" i will use as Link the content from the SFS_NewsLink.
how can i do this? have envery one any ideas?
Best Regards
Thomas

Hello Thomas,
You can modify your Collection Renderer and Resource Renderer to achieve this functionality.
Check this weblog, to get ideas:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3648
Greetings,
Praveen Gudapati

How can I use my Mac OS X for the next time

Dear sir,
Please, I need your help about Mac OS X and how can I use the OS for the next time I mean when I'm going to format my computer or to use for the another computer.
By the way... I already installed the Mac OS X to my MacBook Pro so please I'm waiting for you advice.
Mohammed Hussein

Hi,
He bought the iMac two years after mine.
Would his Mac still be under warranty? It sounds like it is about only a year old and so may be still eligible for phone support, though that may depend on having nearby access to an Apple Tech support.
He could get a replacement disk sent to him as well. The cost, I don't know.
Your disk would probably work, but you don't need to burn one; just use yours. If you are in two locations, then it would be better for Apple to mail him a replacement disk for his particular Mac.

HT204053 I can not sign in at iTune. How can I use this ID to sign in the iTune?

How can I use my Apple ID to sign in iTune store?
<Email Edited by Host>

Your ID seems to be used to connect to an icloud account. You can also use the ID for a new itunes store account - but are you sure you want to change that store account? Any purchased songs, apps, movies, etc. using an old ID will be removed from your device. This is because any purchased item is forever associated with the ID used to purchase it. If you have purchased things in the past using some other ID, you should consider keeping that old ID for the itunes store and use the new ID for icloud.

How can I use an IF ELSE statement and the xdoxslt: get_variable together?

First of all, I'm a big fan of this forum and I just want to thank the community for helping make the BI Publisher world a better place.
I'm trying to populate a table with a years worth of data with the column=PRODUCT and row=month of DATE. Here's the catch, not all of the months will have data. So here's where my problem is, I'm not able to use an IF ELSE statement along with a XDOXSLT:GET_VARIABLE expression so that if there's no data for that month the default value will be 0.
Can someone help me find a solution to either one of the attempts below or a completely new method? Thanks!
BP4 = numeric month value using DATE (more code to pull only month from DATE not included here)
JAN1 = PRICE if data exists, else 0
1) I tried this and it didn't work:
<?if: xdoxslt:get_variable($_XDOCTX,'BP4'),01 then xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE) else xdoxslt:set_variable($_XDOCTX, 'JAN1',0) end if?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
2) I tried this and it didn't work:
<?xdoxslt:ifelse(xdoxslt:get_variable($_XDOCTX,'BP4')='01',xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE),xdoxslt:set_variable($_XDOCTX, 'JAN1',0))?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
3) I tried this and it didn't work:
<?xdofx:if xdoxslt:get_variable($_XDOCTX,'BP4')='01' then xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE) else xdoxslt:set_variable($_XDOCTX, 'JAN1',0) end if?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
sample XML:
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-01-01T00:00:00.000+08:00</DATE>
<PRICE>31</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
-DrT
Edited by: 990965 on Feb 28, 2013 8:27 AM

let me clarify my logic, the template 1) searches for the relevant PRODUCT (in the case below, it searches for BPD which is the column in the table) 2) searches for the relevant month in DATE (which is the row in the table) 3) if data exists, get PRICE else default to 0
Variable definitions:
BP4 = numeric month value from DATE (more code to get this value not included here, but it works...)
JAN1 = set to PRICE if data exists for that month, else 0
the query is only pulling all of the existing data, so if there's no data for March then there wouldn't be a March entry in the xml. In the sample xml below, we only have data for the first two months (Jan, Feb) so that's the only data in the xml. I can't check if PRICE is null because the xml will not have any data for March.
I've read through other threads and it seems that BI Publisher can't use an IF THEN ELSE with the XDOXSLT:GET_VARIABLE. I sent the template and xml to you.
Sample XML:
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-01-01T00:00:00.000+08:00</DATE>
<PRICE>31</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-02-01T00:00:00.000+08:00</DATE>
<PRICE>30</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
Edited by: 990965 on Feb 28, 2013 8:30 AM

How can I use a shared library made with the application builder?

Hi,
I am using LabVIEW 7.1 running on Slackware 10.1 (kernel 2.4.29) and I am trying to call a graph display from a C program that I use for debugging VME access from a VMIVME controler. So using the application builder I built the VI as a shared library (graph.vi -> graph.so) containing a function called "graph". In my main program the call to the dlopen fails with the error: "graph.so: undefined symbol: UninitLVClient". When I examin graph.so with nm I see that UninitLVClient and other LabVIEW functions are indeed undefined and using ldd shows that graph.so has dependencies only on libc.so.* and *linux*.so.* but not on LabVIEW related stuff. Those functions are defined in the liblv.so that's in the cintools directory but I have no idea if the user is supposed to use that.
So I think I am missing an important concept here. Can somebody help or direct me to some documentation (I found lots of information about how to link external code to LabVIEW but nothing about how to link LabVIEW code to an external program)?

Thanks Watermann,
your message has been very useful so now I am linking to the proper library but I still have problems when trying to load dynamically the shared library produced with LabVIEW. It is strange that I could successfully load the lvrt library at loading time but it does not work when I am loading the library at execution time.
I made a small LabVIEW program that prints a hello window and I am calling it from a C program. In the first program main.c I am linking to the lvrt library at loading time and it works but in the second one I am linking dynamically at execution time and it does not work. For my work I need to be able to load code done in LabVIEW at execution time. Any help is appreciated!
Program main.c:
// small program to call a LabVIEW shared library
#include
#include
#include "hello.h" // got this from the LabVIEW builder, i.e. when I made the hello.so
int main(void)
printf("Hello from C!\nLets call LabVIEW now\n");
hello();
printf("Bye ... \n");
return 0;
The command to compile main.c, i.e. linking shared library lvrt when loading main program:
gcc -Wall -I /usr/local/lv71/cintools/ -o main main.c hello.so -l lvrt
The LD_LIBRARY_PATH has been defined and exported:
$ LD_LIBRARY_PATH=$PWD
$ export LD_LIBRARY_PATH
IT WORKS!
Program main2.c:
// small program to call a LabVIEW shared library
#include
#include
#include
int main(void)
void * h_lvrt;
void * h_hello;
void (* hello)(void);
char * error;
printf("Hello from C!\nLets call LabVIEW now\n");
// open LabVIEW RunTime shared library
// in my computer located at /usr/local/lib/liblvrt.so
h_lvrt = dlopen("/usr/local/lib/liblvrt.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
printf("error : could not open LabVIEW RunTime library\n");
printf("%s\n", error);
return 1;
// open hello shared library
// in my computer located at /home/darss/lv_call/hello.so
h_hello = dlopen("hello.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not open hello library\n");
printf("%s\n", error);
return 1;
// get function hello from library hello.so
hello = dlsym(h_hello, "hello");
// check for error
error = dlerror();
if (error) {
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not get the hello function\n");
printf("%s\n", error);
return 1;
// call hello function
hello();
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("Bye ... \n");
return 0;
The command to compile main2.c, i.e. dynamically linking library lvrt at execution of main2 program:
gcc -Wall -o main2 main2.c -l dl
The LD_LIBRARY_PATH still defined and exported.
IT DOES NOT WORK!
Program output:
Hello from C!
Lets call LabVIEW now
error : could not open hello library
/home/darss/lv_call/hello.so: undefined symbol: WaitLVDLLReady

How can i use Mail on 2 macs with the same mail address?

Hi,
I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
What is to be done to separate the two systems (i. e. make them independent of each other)?
Hans

It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

How can I use two different page orientations in the same document?

I am trying to have both portrait and landscape page orientations in the same document. Pages doesn't seem to like this. Is there a way?

I tried to comment on another thread about this same issue, but the thread was closed.
In the other thread; however, some asked why rotating one pages was necessary, and if they knew then maybe there would be reason to create the function.
Well, I don't know about why anyone else needs it, but for me it's for the papers I have to write for my masters program. The professors like to have the rubric attached to the bottome of the document so they easily grade and keep things organized. They of course give directions on how to easily change the orientation of the last page in Word, but not all of use Word, or even want to use Word. Maybe I need to ditch Pages and go to Word? I'd really hate to do that!
So, come on Apple, let's get this feature added, stat!

How can I use mail merge with numbers in the new pages version?

I am trying to use mail merge with the new version of pages and can not seem to be able to figure it out. PLEASE HELP!!!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

How can I use my previews as "masters", wen the masters are irretrievably lost? My idea is to at least be able to save the lost pictures by using the Previews as the new "originals".

So, yes. Most of my master pictures are gone, long story - please don't ask why. The question now is whether I can use the previews (which are still there) which is surely better than nothing. But except for browsing, there's nothing I can do with them, unless they have a master file connencted. Has anyone got a clue how I could make Aperture treat these remaining preview as master files as well as previews, or in some way make this files useable.
Thank you very much for your help, if anybody out there has a clue how

So, yes. Most of my master pictures are gone, long story - please don't ask why.
I assume, your library is referenced? And the versions are now pointing to missing original master image files?
Then try the following - for each project separately.:
Select all images in a project and drag them from the Bowser to a folder outside the library. This will export the previews as jpegs.
Now - with the images in the project still selected - use the command "File > Locate Referenced Files" to open the "reconnect" window. In the upper part of the reconnect Window select the first of your images that needs to be reconnected, and in the lower part point it to the corresponding jpeg you exported. Hold down the alt/options-key⌥ to force the connect-buttons to appear. Press "Connect all".
Regards
Léonie
P.S: If the reconnect buttons refuse to become active, even with the⌥-key held down, check the filenames. The previews should be named exactly like the missing originals. I tried this in Aperture 3.4.5, but I am not sure, if it will work in all Aperture versions the same.

How can I use the hardware compare feature of the 6551 card to trigger scripts

Similar Messages

Maybe you are looking for