How can I use the Intelligent Instrumentation PCI 20001C card with DIAdem 6

I need to update my DIAdem Version 4.00 to 6.02. But there is no driver for my measuring card Intelligent Instrumentation PC20001C that i used with DIAdem 4.00.
What do I need to do?

I am not sure about version 6.02, but your card seems to be supported in version 8.
Check here for a list of supported hardware:
http://www.gfs-ac.de/english/index.htm
Click on 'Supported hardware" on the left in the 'Products - DIAdem" section and then choose your manufacturer on the right side. For II, it shows support for the PCI 20.001C-1 and -2 in version 8.
Let me know if you have any additional questions.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac? There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac? Thanks ...

Thanks again!
Hmmm ... I wonder. The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it). When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones. I will certainly try your solution - what do I have to lose? If they don't work, then I get new ones - or try something else.
Many thanks for your time!

How can I use the media Buttons on my M40X with WinAmp?

Hello
Today I got my M40X and i have a question.
There are 5 media Button left of the keybord (CD/DVD, Play/pause, Stop, <-/->)
Is it possible to use them with WinAmp?
In the Toshiba Assist i got the CD/DVD button used to start WinAmp (by use him to start a .exe) but the Play/pause...dont work. In the field media Apps the only Player i can choose is Win MP10 (I hate this piece of sh*t).
How can I use these Button with WinAmp?

Hello
As far as I know the Toshiba Controls were tested and designed only for Microsoft Media Player and WinDVD. How this topic says:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3621&messageID=11461#11461
I dont have any experience with WinAmp but I found useful info in this forum about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6673&messageID=24448#24448
Check this.
Bye

How can i use an american app store gift card with a canadian iPhone?

Hello
I just watt to know if i can use an american app store gift card with a canadian iTunes account?
Thanks
Carole2509

no
gift cards are country specific

How can I use the function keys in a GUI with swing?

I'm wondering how do you declare you want an action to happen when a user uses a function key or any key for that matter. How can you specify something frame wide or for that matter for a specific jtextbox?

you need to use an accelerator
setAccelerator(javax.swing.KeyStroke.getKeyStroke(java.awt.event.KeyEvent.VK_A, java.awt.event.InputEvent.SHIFT_MASK | java.awt.event.InputEvent.CTRL_MASK)

How can I change the polarity of my NiDAQ card with visual C++ ?

Hi,
I'm using VC++ to program a GUI to do data acquisition. I would like to change the polarity of my NIDAQ card through VC++, i.e., without using the measurement and automation software. I connot find anything about this on the internet. Could anyone please help me out?
Thank you,
bart.

While some of the details may change depending upon which card you are using, essentially you will just need to adjust the range for your signal.
You can find the command and how to use it by using the NI-DAQmx C Reference Help (Start > All Programs > National Instruments > NI-DAQ)
You might like these functions:
int32 __CFUNC DAQmxSetAIRngLow/High(TaskHandle taskHandle, const char
channel[], float64 data);
or
int32 __CFUNC DAQmxSetAIGain(TaskHandle taskHandle, const char
channel[], float64 data);
Pick your favorite and go from there.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

How can I use a U.S. iTunes gift card with Cdn registration?

System does not recognize U.S. code on gift card on the Canadian site and I do not know how to cancel my Canadian registration so that I can set up a U.S. registration. I have addresses in both countries so it appears I should be able to register and buy songs when I have gift cards in both U.S. and Canadian dollars and depending on which country I am in.

Gift card are country specific. You can not use any country's gift card in another country.
You cannot buy from another country's itunes store either.
You may be able to sell your itunes card to someone in the U.S. and buy a Canadian itunes card.

How can I use the Windows 7 high contrast theme with CS6?

I prefer using a high contrast theme in Windows, as I find it reduces eye strain, unfortunately these themes don't work in InDesign CS6 (i've tested Illustrator, Dreamweaver and PS and they seem to handle the high contrast theme ok, but this forum doesn't quite like it either, but that could just be because I'm forced to use IE at work here)
Any text within dialogue boxes is black, and the toolbars and windows are pretty much unusable too.
Is there any way around this issue?

I see the same thing using a High Contrast theme. I think you're in uncharted territory here as far as what's been discussed previously on the forum, but maybe one of our other users also is a high contrast aficianado and has figured something out.

How can i use the amp designer or pedalboard for software instruments in garageband 10

how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?

hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x

How can I use the Variable Delay VI (From DSP Module) to Deploy Variable Delay on Speddy-33

Dears,
I dont Understand How Can I Use the Variable Delay to Deploy Variable Delay on a Speedy-33 Kit

Hello,
Thank you for posting to the NI Forums!! You should be able to incorporate the Variable Delay.vi into your vi and then build as normal and the functionality of the vi should translate to the build. What type of build are you doing? Are you receiving any specific errors? Thanks!
Regards,
Margaret Barrett
National Instruments
Applications Engineer
Digital Multimeters and LCR Meters

Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

10.6.8 won't run on a PowerPC Mac.
10.6.8 also won't run the latest Java. Here's what version of Java you can run:
https://discussions.apple.com/docs/DOC-5532

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How can I use the QR codes with my iPad 2. do I need to download first an app ?

How can I use the/read the QR codes with my iPad 2 ? Do I need to download an app ?

Yes. There are quite a few available for free in the app store

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

How can I use the Intelligent Instrumentation PCI 20001C card with DIAdem 6

Similar Messages

Maybe you are looking for