How can I use the 'Location' field?

I'd like to use the location field on my Time Capsule to keep the correct GPS location. What is the correct format for this?
How do I enable this so that devices can use this to set their location?

I don't suppose it's likely to occure in a future release of time capsule software is it?
On the Support Community, we are all users....just like you....so we have no way of knowing what Apple's future plans might be regarding new products or software.

Similar Messages

How can I find the location of the signature used in the Adobe Reader signature feature?

How can I find the location of the signature used in the Adobe Reader signature feature? I've been using the signature feature for a while now and it works great and I'd like to use it on another computer. However, I forgot where I stored the signature. Adobe finds it with no problems (the signature pops up when I click "Place Signature"), but I have no idea where it is.

Hello,
It's here - C:\Documents and Settings\username\Application Data\Adobe\Acrobat\10.0\Security\
For more information, please refer - Cannot create a digital ID/signature
~Deepak

How can I use the F11 short cut to go to next field in Microsoft Word 2011 on Macbook Air

How can I use the F11 short cut to go to next field in Microsoft Word 2011 on Macbook Air?

The default setting for the function keys is that they do OS X functions.
To get a regular function hold the fn key and then press the function key.
This action can be reversed in keyboard preferences.

How can I use the field "Sales Order" on derivation?

Dear All.
This is about PA characteristic derivation.
I want to change the characteristic value "Sales Order (KAUFN)" by derivation.
But I cannot select the characteristic field on target field.
The field "Sales order(KAUFN)" doesn't exist there.
Why? How can I use the field "Sales Order" on derivation?
Y.C.Bae

Hi Bae,
in order to be able to choose fields KAUFN (for sales order) and KDPOS
(for sales order item) as target fields of derivation step 'enhancement'
you have to modify the coding of subroutine EXIT GET_ALLOWED_TARGETS
in program RKEDRCOPA like this:
    NAME-IDENTIFIER = 'CO-PA'.
    NAME-TABNAME = FIELDTAB_ENTRY-TABNAME.
    NAME-FIELDNAME = FIELDTAB_ENTRY-FIELDNAME.
    IF FIELDTAB_ENTRY-USGFL CA 'DUV'
BEGIN OF INSERTION *****
         OR FIELDTAB_ENTRY-FIELDNAME = 'KAUFN'
         OR FIELDTAB_ENTRY-FIELDNAME = 'KDPOS'
END   OF INSERTION *****
         OR FIELDTAB_ENTRY-FIELDNAME = 'KNDNR'
         OR FIELDTAB_ENTRY-FIELDNAME = 'ARTNR'
Actually sales order number and sales order item shouldn't be changed
by derivation (therefore they are no valid target fields in standard)
but if you need to fill them within an enhancement this modification
will help you to define them as valid target fields. But this is just
the technical frame so far; the logic from which table you'd like to
derive the sales order number correctly depends on your implementation
of the enhancement! I just want to ask you to be rather careful with
the implementation of the exit so that the sales order number isn't
changed in cases that shouldn't be concerned.
Regards,
Abhisek

I am using a 5s under IOS 7.1.1. How can I change the year field directly when editing an existing calendar entry?

I am using a 5s under IOS 7.1.1. How can I change the year field directly when editing an existing calendar entry?

Glad that helped.
Enjoy your iPhone!

How can i add STORAGE LOCATION field which is not...............

hi,
sap gurus,
good morning to all,
how can i add STORAGE LOCATION field which is not in the standard tables namely
KOMP, KOMK, and KOMG.
how to include it in our FIELDS FROM FIELD CATALOGUE.
if we include this field is there any impact on the standard tables.
plz let me know this.
bcz
we are selling our products in two ways
(1). one is straight from factory ie direct sales from factory
if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
deliver him which ever is economical either rail or road.
before coming to second case of selling the goods
we will do STOCK TRANSPORT ORDER from plant to different storage locations.
if we did STO thru road we have to sell the goods thru road only.
if we did STO thru rail we have to sell the goods thru rail route only.
(2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
location which is not registered under excise.
if the goods came by road then it will be delivered by road only.
if the goods came by rail then it will be delivered by rail only.
my logic here is
basing on the
storage location, transportation types, and distance i want to create condition record
that captures exact frieght at the sales order level.
confirm whether i am right or wrong.
regards,
balaji.t
09990019711.

Hi,
It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
But if you have no choice expcept to change the standard tables to meet your requirement - then you need an access key to modify the object, which is available from the market place.
Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
REWARD POINTS IF HELPFUL
Regards
Sai

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can I find the location of an app on my iPad 2?

How can I find the location of an app on my iPad 2? The app comes up with a search, but that seems to be the only way to find it. I just installed the app today, but I can't figure out where it is. It has a pretty distinctive icon, and I've looked through all of my apps and even in folders (even though I don't know how it would have gotten there). I want to put it in an appropriate folder under the right subject, but I can't find it to do this. I can use the app, since I can find it through a search though. I have a lot of apps, but I looked very carefully and can't find it. Is there a way to ask my iPad to locate it for me? It's a $25 app and one I plan to use regularly, so I want it located in the folder of my choice.This problem makes we wonder if I have other "missing" apps, apps that I could find if I happened to think to search for them, but that don't appear to be on my iPad (even though they actually are).

You were right about the homescreens. I had turned my iPad off for the night with less than three full homescreens of loose apps, those not in folders. When I turned the iPad on this morning to try your suggestions, I had five full pages of loose apps. They just appeared when I restarted, and there was the app I was looking for, easy to find. Last night I was deleting apps I decided I wouldn't use, organizing useful apps into folders, and making sure I had as few pages as needed by making sure the gaps made by the moved/deleted apps were closed. The missing apps didn't show up at that point; I was just left with fewer than 11 pages. The apps only showed up when I restarted this morning. There were almost three extra pages of apps that weren't there last night. I know there must be other things missing, since all of the pages are full. So I tried your suggestion in iTunes. I connected my iPad, found an app in the alphabetical list on the left, and double clicked it. This brought me to the app's homescreen (and its home folder when applicable), the place where it was located. In order to identify which page that was, I had to scroll through the screen shots of the homescreens that was below the homescreen that was showing until I found the homescreen whose number was in white. Then I could count the pages on my iPad until I got to that page. I'll have to delete more apps and organize more into folders to see what else might show up. There are just too many apps available for special education, and I'm in the process of figuring out which are the best for my needs. Thanks so much!

How can I program the text fields in my email forum to have rounded corners

How can I program the text fields in my email forum to have rounded off edges or corners.
this is the code im using.
// insert code here// insert code here// prepare email field
var email = sym.$("email")
email.html("Enter your Email: ");
inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
inputEmail .css ('font-size', 14);
inputEmail .css ('width', 350);
inputEmail .css ('background-color', '#4e4e4e');
inputEmail .appendTo(email);
// prepare topic field
var topic = sym.$("topic");
topic.html("Topic: ");
inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
inputTopic .css ('font-size', 14);
inputTopic .css ('width', 350);
inputTopic .css ('background-color', '#4e4e4e');
inputTopic .appendTo(topic);
// prepare message field
var message = sym.$("message");
message.html("Message: ");
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
inputMessage .css ('color',"#ffffff");
inputMessage .css ('font-size', 14);
inputMessage .css ('background-color', '#4e4e4e');
inputMessage .css ('box-shadow', '#4e4e4e');
inputMessage .css ('width', 350);
inputMessage .css ('height', 150);
inputMessage .appendTo(message);
var submitBtn = sym.$("btn");
submitBtn.html("Submit");
submitBtn.css("text-align", "center");
submitBtn.css("font-size",14);
submitBtn.css("font-weight","bold");
submitBtn.css("color","#ffffff");

Try this: inputEmail.css ('border-radius', '25px');
attachment
more details

How can I remove the Location column from the search results in a .chm file?

How can I remove the Location column from the search results in a .chm file?
I generated the file in Robohelp HTML 9.
As far as I know it's used when you've combined more than one source into the final help file. It is possible (though I don't remember doing it) that I did that once a couple of years ago but now I'm only using one source - the project that's generating the .chm.
Can anyone tell me how I can remove it?
Thanks
Tom

In Project Setup look at the Window properties. I think you will find Advanced Search is ticked.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

To test how can we use the opt 'logical file name' to name the file based

Hi Sir/Madam,
to test how can we use the opt 'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.

Hi Vishali,
In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
Rest of the process is same as that of extraction from local file.
Regards,
Durgesh.

How can I find the location of an i-pod shuffle, nano and touch that i have synced to my account? I have had each one stolen and would be so relieved if i could track there location as I know they are still in the county I live.

How can I find the location of an i-pod shuffle, nano and touch that i have synced to my account? I have had each one stolen and would be so relieved if i could track there location as I know they are still in the county I live.
Also if i cant locate them can i at least remotely delete the libraries, and lock them so they are unusable to the thiefs, and i had a sony laptop worth £2000 stolen which I had used my apple account for a year is there anyway i can track that or retrieve the contents and delete them?
Please if anybody knows reply or contact me!!!! =-)
many thanks

You or Apple can do nothing to prevent use of the devices.
For the iPod touch if you turned on the FindMyiPod feature and wifi is on and connected yu may be ablt ot locate it and wipe it by going to iCloud, signing in and going to FindMyiPhone. However, if the iPOd is rectored that feature is deleted.
Report to police and change the passwords for all accounts used on the iPod.

How Can I Set the Search Field in iTunes?

In applescript...
In another app - I have copied a song title to the clipboard...
Q: Now - How Can I Set the Search Field in iTunes to the clipboard contents?
Q: Also how can I also open the main library itunes window?

Hi Rev Dave,
Q: Now - How Can I Set the Search Field in iTunes to
the clipboard contents?
Unfortunately the only way I can think to achieve this involves the use of "UI Scripting". The other previous posters have given you the preferred method you should consider using. If you want to script iTunes so that you visually see the search take place in iTunes you'll need to use the method shown in the script I've posted below.
Q: Also how can I also open the main library itunes
window?
Cyclosaurus has given you the answer to this part of your question already.
Here is a script that (though ugly IMHO) should achieve what you are asking for:set theSearch to (the clipboard) as string
tell application "iTunes"
activate
set allPlaylists to playlists
repeat with aList in allPlaylists
if name of aList is not "Library" then
set view of front browser window to aList
exit repeat
end if
end repeat
set LibList to playlist "Library"
set view of front browser window to LibList
end tell
tell application "System Events"
tell process "iTunes"
if "iTunes" is not in name of windows or ¬
focused of window "iTunes" is false then ¬
keystroke "1" using command down
keystroke tab
keystroke theSearch
end tell
end tellIn order for the above script to work you need to have "Enable access for assistive devices" enabled in the "Universal Access" section of the "System Preferences" application.
If you have any further questions about the above script feel free to ask.
Hope this helps...
iBook G4 1GHz Mac OS X (10.4.3) 640 MB RAM

[EWS][Java] How can I use the Search Filter only mails with attachments?

Hey,
I'm trying to search a folder ( doesn't matter which ) for ONLY mails with attachments.
How can I use the search filter for that purpose?
Thanks!

You can drag the attachment collumn from settings and sort on that collumn
In the main Outlook window, on the View menu, point to
Current View, and then click Customize Current View.
Click Fields. In the Available fields list, click the field that you want to add, and then click
Add.
Come back and mark replies as answer if they help, and help others with the same problem. If this post is helpful please vote it as Helpful on the left side.

How can i use the nested table in form 6i

how can i use the nested table in the form 6i
( i.e i want to insert record into the nestred table field ).
bye siddharth singh

Nested tables are not supported in Forms 6i, only simple object tables.

How can I use the 'Location' field?

Similar Messages

Maybe you are looking for