How can I use the ni-6024-e with the real time of matlab/simulink. Where can I find any example?

I am doing the final project and I need to control the ni-6024-e with the RTW (real time) of matlab/simulink.
Does anyone know or have any example?.
Thanks

Rafelmor,
Have you contacted The MathWorks yet? They probably have the best information.
However, I did a quick search and found some information on The MathWorks' site. For Data Acquisition Toolbox examples: http://www.mathworks.com/access/helpdesk/help/toolbox/daq/daq_example_index.shtml.
For RTW information: http://www.mathworks.com/support/product/RT/.
Good luck with your application.

Similar Messages

Can I use third party DAQ boards with Labview real time?

I have an Adlink DAQ 2010 card that I curently use with labview. Will this card also work with Labview real time? What requironments are there for 3rd party cards to work with Labview real time?
Thanks!

Hello George,
Here is a great link for you to take a look at: Can I Use a Third-Party Device with LabVIEW RT?
Have a great day,
NathanT

What application can you use to open a file with the .acc extension?

What application can you use to open a file with the .acc extension?

http://www.fileinfo.com/extension/acc

Can i use my old IPOD dock with the new G5 IPOD?

Can i use my old IPOD dock with the new G5 IPOD?

That's really good to know. I thought because it was a different thickness you wouldn't be able to, and the dock adaptor that comes with the new iPods doesn't fit into the old Photo dock.
Do you know if you can use the charger that came with the old Photo iPods? You can plug straight into the power socket, but the cable that goes into the charger from the iPod is the firewire cable, so I was thinking maybe it wouldn't work, and I don't want to try it in case I short out my iPod or something!

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

I have iphone5 and now been given Nokia lumia 520 for work. How can I ensure that my calendars all sync in real time between each phone? Many thanks for any advice

Well if you got the Phone Pggray43 at a Local Corporate store in your Area) you should be able to return it as long as you have all the contents.! Phone, Charger and any other accessories that came with it the Box of Course.. As long as you have not went past the 14 Day return.. the store can go over what you used as in Air Time and Data..
Now if you've went past the 14 Day return you be Liable to pay a E.T.F = Early Termination Fee the fee for this is around $300 so hopefully you have not went past the 14 Day return window the Manager if Available is the one I would talk to tell them your on Social Security and you just can't afford a phone as this I'm sure they'll work with you to get something solved..
Hope ya have Good Luck.! b33

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way?

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way? Please tell me what's the best solution if I want to present what's on the iPad screen to TV or projector withtout using internet network or small range of bluetooth.

yes

I have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

i have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

thank you roger. i have attempted to connect my mbp now 3 times (all different ways with different cables purchased) but unfortunately no success. i understand that with me having an older mbp it can be a challenge. i have found this page http://www.wikihow.com/Connect-a-Macbook-to-a-TV but with my unsuccessful history, i have become skeptical. i will try your suggestion and let you know. thank you again.

How can i use Mail on 2 macs with the same mail address?

Hi,
I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
What is to be done to separate the two systems (i. e. make them independent of each other)?
Hans

It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

Can i use my new I pad with the Canon MX870 printer?

Can I use a I PAD 2 with me Canon MX870 Printer?

The Canon MX870 is not on Apple's AirPrint list of supported printers:
AirPrint basics
So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi ‏130 KB

other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

How can I use a shared library made with the application builder?

Hi,
I am using LabVIEW 7.1 running on Slackware 10.1 (kernel 2.4.29) and I am trying to call a graph display from a C program that I use for debugging VME access from a VMIVME controler. So using the application builder I built the VI as a shared library (graph.vi -> graph.so) containing a function called "graph". In my main program the call to the dlopen fails with the error: "graph.so: undefined symbol: UninitLVClient". When I examin graph.so with nm I see that UninitLVClient and other LabVIEW functions are indeed undefined and using ldd shows that graph.so has dependencies only on libc.so.* and *linux*.so.* but not on LabVIEW related stuff. Those functions are defined in the liblv.so that's in the cintools directory but I have no idea if the user is supposed to use that.
So I think I am missing an important concept here. Can somebody help or direct me to some documentation (I found lots of information about how to link external code to LabVIEW but nothing about how to link LabVIEW code to an external program)?

Thanks Watermann,
your message has been very useful so now I am linking to the proper library but I still have problems when trying to load dynamically the shared library produced with LabVIEW. It is strange that I could successfully load the lvrt library at loading time but it does not work when I am loading the library at execution time.
I made a small LabVIEW program that prints a hello window and I am calling it from a C program. In the first program main.c I am linking to the lvrt library at loading time and it works but in the second one I am linking dynamically at execution time and it does not work. For my work I need to be able to load code done in LabVIEW at execution time. Any help is appreciated!
Program main.c:
// small program to call a LabVIEW shared library
#include
#include
#include "hello.h" // got this from the LabVIEW builder, i.e. when I made the hello.so
int main(void)
printf("Hello from C!\nLets call LabVIEW now\n");
hello();
printf("Bye ... \n");
return 0;
The command to compile main.c, i.e. linking shared library lvrt when loading main program:
gcc -Wall -I /usr/local/lv71/cintools/ -o main main.c hello.so -l lvrt
The LD_LIBRARY_PATH has been defined and exported:
$ LD_LIBRARY_PATH=$PWD
$ export LD_LIBRARY_PATH
IT WORKS!
Program main2.c:
// small program to call a LabVIEW shared library
#include
#include
#include
int main(void)
void * h_lvrt;
void * h_hello;
void (* hello)(void);
char * error;
printf("Hello from C!\nLets call LabVIEW now\n");
// open LabVIEW RunTime shared library
// in my computer located at /usr/local/lib/liblvrt.so
h_lvrt = dlopen("/usr/local/lib/liblvrt.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
printf("error : could not open LabVIEW RunTime library\n");
printf("%s\n", error);
return 1;
// open hello shared library
// in my computer located at /home/darss/lv_call/hello.so
h_hello = dlopen("hello.so", RTLD_NOW);
// check for error
error = dlerror();
if (error) {
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not open hello library\n");
printf("%s\n", error);
return 1;
// get function hello from library hello.so
hello = dlsym(h_hello, "hello");
// check for error
error = dlerror();
if (error) {
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("error : could not get the hello function\n");
printf("%s\n", error);
return 1;
// call hello function
hello();
// close hello shared library
dlclose(h_hello);
// close LabVIEW RunTime shared library
dlclose(h_lvrt);
printf("Bye ... \n");
return 0;
The command to compile main2.c, i.e. dynamically linking library lvrt at execution of main2 program:
gcc -Wall -o main2 main2.c -l dl
The LD_LIBRARY_PATH still defined and exported.
IT DOES NOT WORK!
Program output:
Hello from C!
Lets call LabVIEW now
error : could not open hello library
/home/darss/lv_call/hello.so: undefined symbol: WaitLVDLLReady

How can i use my existing apple account with the app store when i have no credit card or paypal?

i dont have a credit card or a paypal account how do i use the bloody appstore when i have neither and already have an apple id?

This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
https://discussions.apple.com/message/24907941

How can i use my synology iTunes Server with the iTunes from my iPad?

Have anybody the Same Constalation @ home? I like to have Access to my synology iTunes Server from my iPad via iTunes without a thirdparty App, to have Access to the Central Data like Music, etc.? Have some One expirence with the configuration and implementation?

It will almost certainly not be possible. If you don't sign up for AT&T service for the iPad, then replace your Sprint card with a MiFi or Overdrive device from Sprint. This will use your Sprint service, but connect to your iPad using Wi-Fi. It also has the advantage of you being able to use it with any Wi-Fi capable device. IOW, you can use both your laptop and iPad at the same time with the MiFi or Overdrive, but only have to pay for one Sprint account. Of course, all devices that connect to the MiFi or Overdrive will use up your 5GB allotment, unless you use Overdrive in a 4G area. (Overdrive is unlimited on 4G, but has a 5GB cap in 3G areas.)

How can I use the ni-6024-e with the real time of matlab/simulink. Where can I find any example?

Similar Messages

Maybe you are looking for