How can I use the PCI-4451 installed in a laptop?

I would like to configure a sound level meter using a laptop and PCI-4451. I need a portable and rugged system to be used in the field. What are my options? Can I use the Configurable Signal Conditioning Enclosure CA-1000?
Thanks again.

Hello,
The CA-1000 does not contain a PCI bus interface for cards like the PCI-4451. The CA-1000 accepts a variety of signal conditioning modules and is then connected by cable to an acquisition device.
To use the 4451 with a laptop, you would need a Cardbus to PCI expansion chassis, such as those offered by MAGMA and other companies. I mention MAGMA only because I have a small amount of experience with their products. I'm sure there are others that are equally suitable.
If you're not 100% attached to the 4451, there are a couple other options. You could use a 1394 based DAQ device such as the NI DAQPad-6052E for FireWire, which could then be co
nnected to something like the CA-1000 if necessary, depending on your signal specs. Keep in mind that even though both the 4451 and 6052E are nominally 16-bit boards, the 4451 would be more suitable for audio measurements, particularly if you need simultaneous measurements on more than one channel.
Finally, a portable PXI system with the 4472 would make an ideal platform for precision audio measurements, if this fits within your budget and your definition of portable.
Regards,
Brent R.
Applications Engineer
National Instruments

Similar Messages

How can i use the same id on two different laptops?

When trying to use the same login on two different laptops so that i can connect my nook to either depending on which one is free, i get the error that the id is already in use on another computer?

The issue is embedded in the way the software works. To comply with the
Digital Millenium Copyright Act of 2000, all software companies in this
business keep track of where their software is installed, making
information about the computer and ereaders part of an ID file. So, your
user ID is embedded in the ID file of each computer, but each computer has
a different ID of its own that is also embedded in that file. Adobe's
master server (yes, there is one that you connect to even if you didn't
know it) also has that information, and when you try to use an ID on one
that's embedded in the file of another, Adobe's server blows the whistle,
and as you can see, you can't do that....
==========

How can i use the apps i have downloaded on itunes

how can i use the apps i have downloaded on itunes

Apps downloaded through iTunes will only run on iOS devices such as iPhones, iPod Touch, and iPads. Plug your device into your computer, open iTunes, and click on it in the bar either at the top or the left side. Then, click apps at the top, and click install next to the app you want installed.
If you are looking for apps to run on your Mac, you need to download them through the Mac App Store, not through iTunes.

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can I use the CAN MODULE in LABVIEW 6i?

How can I use the CAN MODULE in LABVIEW 6i?
HELP ME! PLEASE

Not sure what your real question here is, but I'll take a stab at it.
The NI-CAN drivers (module) only work with the NI CAN cards. If you have a different vendors card, you'll have to contact them to see if they have LabVIEW drivers.
If you do have a NI CAN card, then you just need to install the NI-CAN drivers and you're ready to go. Have a look at the examples for help in getting going.
If you're having a specific problem, please give us some more details and we may be able to help out a bit more.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How can I use the QR codes with my iPad 2. do I need to download first an app ?

How can I use the/read the QR codes with my iPad 2 ? Do I need to download an app ?

Yes. There are quite a few available for free in the app store

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

HT4314 I have a game under one account, now I have an Itunes card under a different account, how can I use the $$$ in the card for the game I'm playing, I need to purchase different items for my game.

I have been playing a game for a while under an account, now I have an Itunes card under a different account and would like to use that $$$ to purchase items for my game, but it doesn't let me because the game was downloaded under the original account. How can I use the $$$ in my new account?

same here but i cant purchase a movie or anything

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

Thank you KiltedTim!
YES, that is the free 5GB icloud memory for each apple ID. Can I not add the free 5Gb of my second Iphone to my original apple ID (5GB also) as I want to use one Apple ID name on both 2 Iphones? Is it necessary to have a different apple ID for the second Iphone to avail the free 5GB it carries with it?

How can i use the iCloud

how can i use the iCloud,i can't find the icon which should need i download

system preferences - internet & wireless section - iCloud

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

How can I use the Gmail app on the Watch?

I do not use the Mail app on any of my Apple devices. How can I use the Gmail app on the Watch?

Since Google has not added watch support to the gmail app, you don't. You should be able to get notifications, but at this time, there is no gmail app for the watch.

How can I use the PCI-4451 installed in a laptop?

Similar Messages

Maybe you are looking for