How can I use the same domain.sites2 on two macs?

I know iWeb is no longer supported but I still find it ok to manage my web site.
I would like to work on the site from two macs. I thought I could just use the same Domain.sites2 on both macs but: if I move Domain.sites2 to dropbox folder, when I launch iWeb it does not know about it and creates a new empty Domain.sites2 in the Library/iWeb folder
I do not want to have to manually make a copy of Domain.sites2 to Dropbox and then to the other mac's Library every time I switch computer.

You may want to use :
http://wyodor.byethost8.com/iwebsites/iWebSites.html
Select "Choose new folder" from the File menu to select the folder on Dropbox where your domain file is.
If that does not work, use:
http://wyodor.byethost8.com/iwebsites/iWebDrop.zip
(Unzip the file and drop the domain file on top of it)
After that, you can open iWeb with your currently used domain file.

Similar Messages

How can I use the same "I Tunes" on two different computers

I’m using two different kinds of Personal Computer: One is Desktop PC And the other one is Notebook .
In each computer there are the same songs and when I get the new ones to the Desktop I want them to be placed on the Notebook or reverse.
Where does the I Tunes save the playlist on the hard drive ?
I have prepared a playlist on my Notebook and want it to be seen on the Desktop but I dont want to fallow the steps File > Library > Export Playlist on the Notebook. Is there any other way to make this issue instead of the mentioned steps.
How can I see the same Playlists and songs on two different computers ( notebook and desktop) including the updating processes.
Operating systems of the computers:
Desktop: XP Pro
Notebook: Vista Bussiness

I use SyncToy 2.0 to keep two instances of my library in sync. SyncToy's preview will show which files it is about to update giving you a chance to spot unexpected changes and during the run only the changed files will be copied saving lots of time.
As long as I sync after making updates at one instance of the library before making any updates at the other then everything works just fine. I periodically run iTunes Folder Watch to check for any orphaned entries or new items that haven't been imported into the active library. If your machines are regularly networked together this process is fairly straightfoward. Mine are in disparate locations so I use one of the (physically) small WD My Passport host powered drives which I take between home & work, synchronising at either end. This gives me three complete copies of my library so I'm covering backup & synchronisation in the same operation.
When connecting my iPod at either location iTunes recognises itself as the "home" library for the iPod so I'm able to use the sync with selected playlists option without getting warning messages about the iPod being synced with a different library.
tt2

How can I use the same catalog on PC and MAC?

I keep my catalog and photos on an external hard drive. I have both PCs and a MAC and I would like to be able to access the same catalog of photos on both my PC and my MAC using LR2. I am using v 2.3. The problem is the location of the photo is referenced differently on the PC than on the MAC. Does any one have any idea how I might accomplish this?
If this is impossible, then can anyone at least tell me how I can convert my catalog file (lrcat) so that the location of photos that are currently referenced using a drive and path (eg, p:\myphotos\...) to a format that can be used on the MAC so Lightroom running on the MAC will know about the photos on my external drive?

I have figured out the answer to my question. Thanks to those who tried to help.
First of all, I found that Lightroom's 'Locate folder' didn't work for me. It might have if I had tried that the first time I tried to convert things, but I had tried to locate a few photos already, so I was always told that the folder I was trying to locate was already in the catalog.
Breifly, what did work was to locate individual photos using the ? you see on the photo when in grid mode in the Library view and specify that other photos nearby should also be relocated. By choosing a photo at the top of the directory tree, Lightroom will search for all photos in the directory containing your photo and all subdirectories of it.
The details:
What did work, was to individually locate photos using the ? you see on the photo when in grid mode in the Library view. If you turn on the choice to locate other photos nearby, then Lightroom will search for other photos in this directory and in all subdirectories of the one containing your located photo. This was a good start, but the problem for me is that my photos are stored in many directories below an organizing directory (eg, \2009\2009-01-02) and the organizing directory (\2009 in this example) does not contain any photos to locate. Furthermore, each of my orgainizing 'yearly' directories are organized in one top directory (\Photos) that also has no photos in it to locate. So, to make use of this feature, I had to create a photo in at least the top directory that I could use for finding the rest. I call this a 'FindMe' photo. I found that it needed to have a totally different file name than any other photo in my library. So, I created on be exporting another photo (with very poor resolution to keep the size small) and giving it a name of FindMe-<directory_name>. I also found it helpful to give it a caption of 'FindMe' to use in locating the photo. I imported this photo into the top directory (\Photos) on the PC.
The next step was to open the .lrcat on the Mac. Looking at the grid of all photos, I narrowed down the photos to just those that had a caption of 'FindMe' or a file name of FindMe. That located the photo in \Photos that I could use to start the search for all the rest. (Note that giving your locating photo a name you can easily find is important because all you will be able to see when you look at all of the photos is just a blank square and I couldn't find any way to tell Lightroom to only show me photos in this one directory, excluding subdirectories (this is a feature they should add to Lightroom).)
Now theoretically, this trick should have located all of my photos. However, in a library of over 55,000 photos, there's bound to be some problems. It turns out that my library that started in Adobe Photoshop Elements had some entries that didn't point to the file properly...in fact there was a blank space at the beginning of the filename. We had caught this problem and renamed the file on the hard drive properly, but a few catalog entries had missed the correction of the filename before we converted this to a Lightroom catalog. (Elements tolerated the blank space in the file name, Lightroom does not). This caused Lightroom to hang when it was locating file. I solved this problem by fixing a lot of these in the PC catalog. (This took some doing, because Lightroom would first give me a ? to let me locate the file, but it quickly realized it had a problem and changed the ? to a danger sign that would not allow me to do anything with the photo. So, I had to act quickly to correct the problem with these photos.) That fixed a lot, but there were apparently still some problems in the library that caused Lightroom to hang when locating photos. Also, as the number of photos that were properly relocated grew, I found that it took too long to let Lightroom try to fix the entire library. So, I started creating FindMe photos in the few remaining 'yearly' organizing directories and locating files in each of these. That pretty much did the trick.
My wishlist for Lightroom new features:
1. I would like it if I could tell Lightroom to locate all photos within a directory (with the choice to includ subdirectories) in a particular place. By this, I mean to go from the directory, not from a specific photo within a directory.
2. I want to be able to tell Lightroom to only display photos within a particular directory (excluding those in the subdirectory). This would make it a lot easier to locate my 'find me' photos and would eliminate the need to make the so identifiable.

How can I use the same Apple Id on two different devices without having to re-enter my payment details

I have a Macbook Pro and an iPad2 which I sync to the Macbook. Sometimes I buy apps straight from the iPad and other times from the Macbook but each time I change from one to the other I have to re-enter my payment details. Can I set my account up to recognise that I may buy from both of these devices?

Apple "verifies" your Apple ID account information with every purchase of all free or paid apps whether iOS devics or computers.
Apple wants to make sure someone else hasn't compromised your account.

How can i use the same cursor in a loop fro multipletimes.

I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
I am sending the code which i have written in When-Button-Pressed-Trigger...
declare
     sid number;
     pid number;
cursor csid is select distinct(site_id) from cyber_ppt;
cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
     stdt varchar2(10);
     eddt varchar2(10);
     nom number;
     stmonth varchar2(10);
     edmonth varchar2(10);
     cjan number:=0;
     cfeb number:=0;
     cmar number:=0;
     capr number:=0;
     cmay number:=0;
     cjun number:=0;
     cjul number:=0;
     caug number:=0;
     csep number:=0;
     coct number:=0;
     cnov number:=0;
     cdec number:=0;
     i number:=1;
begin
     open csid ;
     loop
     fetch csid into sid;
          exit when csid %notfound;
          message(sid);
     open cpid;
     loop
     fetch cpid into pid,stdt,eddt ;
     exit when cpid %notfound;
     message(sid||'-'||pid);
     stmonth:=substr(stdt,4,3);
     edmonth:=substr(eddt,4,3);
     nom:= months_between(eddt,stdt);
while i <= round(nom)
     loop
     stmonth:=substr(stdt,4,3);
if stmonth='JAN' then
          cjan:=cjan+1;
elsif stmonth='FEB' then
          cfeb:=cfeb+1;
elsif stmonth='MAR' then
          cmar:=cmar+1;
elsif stmonth='APR' then
          capr:=capr+1;
elsif stmonth='MAY' then
          cmay:=cmay+1;
elsif stmonth='JUN' then
          cjun:=cjun+1;
elsif stmonth ='JUL' then
          cjul:=cjul+1;
elsif stmonth ='AUG' then
          caug:=caug+1;
elsif stmonth ='SEP' then
          csep:=csep+1;
elsif stmonth ='OCT' then
          coct:=coct+1;
elsif stmonth ='NOV' then
          cnov:=cnov+1;
elsif stmonth ='DEC' then
          cdec:=cdec+1;
end if;
     stdt:=add_months(stdt,1);
     i:=i+1;
     end loop;
     end loop;
     end loop;
     end;


try this /* untested */
DECLARE
sid           NUMBER;
pid           NUMBER;
CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
stdt        VARCHAR2(10);
eddt        VARCHAR2(10);
nom         NUMBER;
stmonth     VARCHAR2(10);
edmonth     VARCHAR2(10);
cjan         NUMBER:=0;
cfeb         NUMBER:=0;
cmar         NUMBER:=0;
capr         NUMBER:=0;
cmay         NUMBER:=0;
cjun         NUMBER:=0;
cjul         NUMBER:=0;
caug         NUMBER:=0;
csep         NUMBER:=0;
coct         NUMBER:=0;
cnov         NUMBER:=0;
cdec         NUMBER:=0;
i            NUMBER:=1;
BEGIN
FOR rec IN csid
LOOP
                  sid := rec.csid;
FOR cRec IN cpid(sid)
LOOP
                 pid := cRec.pc_id;
                 stdt := cRec.st_dt;
                 eddt := cRec.ed_dt;
stmonth:= SUBSTR(stdt,4,3);
edmonth:= SUBSTR(eddt,4,3);
nom:= months_between(eddt,stdt);
WHILE i <= round(nom)
LOOP
          stmonth := SUBSTR(stdt,4,3);
IF stmonth='JAN'
THEN
         cjan:=cjan+1;
ELSIF stmonth='FEB' THEN
         cfeb:=cfeb+1;
ELSIF stmonth='MAR' THEN
          cmar:=cmar+1;
ELSIF stmonth='APR' THEN
          capr:=capr+1;
ELSIF stmonth='MAY' THEN
          cmay:=cmay+1;
ELSIF stmonth='JUN' THEN
          cjun:=cjun+1;
ELSIF stmonth ='JUL' THEN
          cjul:=cjul+1;
ELSIF stmonth ='AUG' THEN
          caug:=caug+1;
ELSIF stmonth ='SEP' THEN
          csep:=csep+1;
ELSIF stmonth ='OCT' THEN
          coct:=coct+1;
ELSIF stmonth ='NOV' THEN
          cnov:=cnov+1;
ELSIF stmonth ='DEC' THEN
          cdec:=cdec+1;
END IF;
         stdt:=add_months(stdt,1);
         i:=i+1;
END LOOP;
END LOOP;
END LOOP;
END;

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

How can we use the same package in our report used by some other report

how can we use the same package in our report used by some other report

Hi,
You just need to assign package while saving your report.
No extra is required providing you are aware of package to be used.

HT204053 Can I use the same Apple ID on two different iphones?

Can I use the same Apple ID on two different iphones and use facetime to communicate ?

Yes.
http://ipad.about.com/od/iPad_Guide/ss/How-To-Use-FaceTime-On-The-iPad_2.htm

How can i get the same itunes library on 2 macs

how can i get the same itunes library on two different macs, without having to pay for icloud please.

Copy everything from one computer to the other.

HT204053 Can you use the same Apple ID for two devices ?

I have an MacPro and I am buying an iPad. Can you use the same Apple ID for two devices or should I create an new AppleID for the ipad?

Welcome to Apple Support Communities
The Apple ID purpose is to have the same data in all your devices and share your purchases among all your devices, so you can use your Apple ID in both devices

HT4759 can you use the same apple id for two phones on the cloud?

can you use the same apple id for two phones on the same verizon account and if so can you keep there contacts etc. separate?

If you want to keep your contacts and other data you sync with iCloud separate, you'll have to create separate iCloud accounts, which will require different IDs. If you share the same iCloud account/ID on multiple devices, the synced data will be merged and will appear on all devices syncing with the shared account.
You can still share the same ID for iTunes; it doesn't have to be the same as the one used for iCloud.

HT4614 How can i use the Thunderbolt cable to link my Mac computers

How can i use the Thunderbolt cable to link my Mac computers

Connect them with it and start up one computer with the T key held down.
(76624)

Can I use the same email address on two different iPads?

Can I use the same email address on two different iPads?
Jackie

I use AOL for my work account, I can open an email on my iPad, my iPod Touch, my iMac, another iMac in the office and there are no issues at all. However, my AOL account is IMAP. I read email on the iPad, turn around and read and print from the iMac and someone else is accessing the email at the same time.
We access the same emails all the time as we have one generic email address that we both use. We like to multitask with AOL.

Can I use the same Apple ID for two iPhone's?

Can I use the same Apple ID on both mine and my partners iPhones? and will there be any troubles or problems that may occur?
Thank you

Yes, but there will be quirks. See: http://support.apple.com/kb/HT1495
What isn't obvious is that you can use different Apple IDs for different functions on your iPhone; for example iCloud, iTunes & App Stores, Game Center, iMessage and FaceTime can all have different Apple IDs from each other.
If you use the same Apple ID for Find my iPhone then both phone's locations will show up at https://icloud.com/find. Which can be good or bad, depending on your situation.
If you use the same Apple ID for iTunes & App Stores you can have the same apps and music on both phones; some or all of them.
You probably want different Apple IDs for iMessage and FaceTime; otherwise, you will get each other's messages
Also different for Game Center.

How can I use the same domain.sites2 on two macs?

Similar Messages

Maybe you are looking for