How can I use the same Game Center name on my iPad and my iPhone?

Is there any way to use the same Game Center name on two devices?

If you signed into Game Center in Settings > Game Center on both devices with the same Apple ID, you should have the same name in both centers.

Similar Messages

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • Can I use the same wall adapter to charge my ipad and my ipod

    Can I use the same wall adapter to charge my ipad and my ipod touch

    No offense, but that's nice. I heard I was wrong and that what I said didn't make sense, so I simplified it. If I'm wrong, fine, but you have no reason to be such a *****. You never explained why I was wrong and you were right, so how am I or anyone else suppose to know that for sure? Then I tell you my source, and you insult me some more and then ask for my background, which as for this area goes, I already gave you. I worked at an Apple store for Christmas and was told by someone on the Genius team to tell customers not to charge iPads via iPhone chargers, as they had been known to fry the adapter or in one weird case, the actual outlet. Now I could see the outlet blowing be a bunch of other contributing factors, and not directly associated with the charger. However, the topic arose when a customer came in because her iPhone wall adapter didn't seem to be working, but wasn't that old, and admitted to charging her iPad with it. Why would I NOT believe that?
    And my DEEPEST apologies on commenting on old threads. I know how vital that is to existance and what an inconvenience it is to EVERYONE else. I'll be honest, I wasn't checking dates as I assumed suggested posts with like one answer near the top of the list were newer.
    Fine, I did something foolish, but I still win as I'm not either of you heartless ****** with nothing better to do than Internet harass others. Congratulations on your existences.

  • I made a new apple id because I couldnt access my other one. How do I use the same game center without knowing the old password?

    My old apple id basically kicked me off of it (Password became incorrect and I couldnt change it back) so I made a new one. I had apps on the old one that used the gamecenter. This hasnt been a problem, but now it wants me to put in the password for my old account to use the apps. I do not want to lose all of my progress, so is there any way for me to bypass this, or just connect it to my new account? (Specifically, I am playing Clash of Clans. I open the app, then after a few moments the gamecenter pops up and asks for my old password to continue. I tried just connecting my device to my phone, but it also needed the password for that too)

    ALL purchases are permanently associated with whatever Apple ID was used to originally obtain them.  Apps can not be updated without knowledge of that ID and, more importantly, its password.  Apple IDs can not be merged and purchases can not be transferred from one ID to another.

  • HT204053 Guys im selecting my apple id to icloud and they told me u have to create a new one ....how can i use the same apple that i need...and also software up to date

    Help plz

    ALL purchases are permanently associated with whatever Apple ID was used to originally obtain them.  Apps can not be updated without knowledge of that ID and, more importantly, its password.  Apple IDs can not be merged and purchases can not be transferred from one ID to another.

  • How can i use the same cursor in a loop fro multipletimes.

    I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
    I am sending the code which i have written in When-Button-Pressed-Trigger...
    declare
         sid number;
         pid number;
    cursor csid is select distinct(site_id) from cyber_ppt;
    cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
         stdt varchar2(10);
         eddt varchar2(10);
         nom number;
         stmonth varchar2(10);
         edmonth varchar2(10);
         cjan number:=0;
         cfeb number:=0;
         cmar number:=0;
         capr number:=0;
         cmay number:=0;
         cjun number:=0;
         cjul number:=0;
         caug number:=0;
         csep number:=0;
         coct number:=0;
         cnov number:=0;
         cdec number:=0;
         i number:=1;
    begin
         open csid ;
         loop
         fetch csid into sid;
              exit when csid %notfound;
              message(sid);
         open cpid;
         loop
         fetch cpid into pid,stdt,eddt ;
         exit when cpid %notfound;
         message(sid||'-'||pid);
         stmonth:=substr(stdt,4,3);
         edmonth:=substr(eddt,4,3);
         nom:= months_between(eddt,stdt);
    while i <= round(nom)
         loop
         stmonth:=substr(stdt,4,3);
    if stmonth='JAN' then
              cjan:=cjan+1;
    elsif stmonth='FEB' then
              cfeb:=cfeb+1;
    elsif stmonth='MAR' then
              cmar:=cmar+1;
    elsif stmonth='APR' then
              capr:=capr+1;
    elsif stmonth='MAY' then
              cmay:=cmay+1;
    elsif stmonth='JUN' then
              cjun:=cjun+1;
    elsif stmonth ='JUL' then
              cjul:=cjul+1;
    elsif stmonth ='AUG' then
              caug:=caug+1;
    elsif stmonth ='SEP' then
              csep:=csep+1;
    elsif stmonth ='OCT' then
              coct:=coct+1;
    elsif stmonth ='NOV' then
              cnov:=cnov+1;
    elsif stmonth ='DEC' then
              cdec:=cdec+1;
    end if;
         stdt:=add_months(stdt,1);
         i:=i+1;
         end loop;
         end loop;
         end loop;
         end;
         

    try this /* untested */
    DECLARE
    sid           NUMBER;
    pid           NUMBER;
    CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
    CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
    stdt        VARCHAR2(10);
    eddt        VARCHAR2(10);
    nom         NUMBER;
    stmonth     VARCHAR2(10);
    edmonth     VARCHAR2(10);
    cjan         NUMBER:=0;
    cfeb         NUMBER:=0;
    cmar         NUMBER:=0;
    capr         NUMBER:=0;
    cmay         NUMBER:=0;
    cjun         NUMBER:=0;
    cjul         NUMBER:=0;
    caug         NUMBER:=0;
    csep         NUMBER:=0;
    coct         NUMBER:=0;
    cnov         NUMBER:=0;
    cdec         NUMBER:=0;
    i            NUMBER:=1;
    BEGIN
    FOR rec IN csid
    LOOP
                      sid := rec.csid;
    FOR cRec IN cpid(sid)
    LOOP
                     pid := cRec.pc_id;
                     stdt := cRec.st_dt;
                     eddt := cRec.ed_dt;
    stmonth:=  SUBSTR(stdt,4,3);
    edmonth:= SUBSTR(eddt,4,3);
    nom:= months_between(eddt,stdt);
    WHILE i <= round(nom)
    LOOP
              stmonth := SUBSTR(stdt,4,3);
    IF stmonth='JAN'
    THEN
             cjan:=cjan+1;
    ELSIF stmonth='FEB' THEN
             cfeb:=cfeb+1;
    ELSIF stmonth='MAR' THEN
              cmar:=cmar+1;
    ELSIF stmonth='APR' THEN
              capr:=capr+1;
    ELSIF stmonth='MAY' THEN
              cmay:=cmay+1;
    ELSIF stmonth='JUN' THEN
              cjun:=cjun+1;
    ELSIF stmonth ='JUL' THEN
              cjul:=cjul+1;
    ELSIF stmonth ='AUG' THEN
              caug:=caug+1;
    ELSIF stmonth ='SEP' THEN
              csep:=csep+1;
    ELSIF stmonth ='OCT' THEN
              coct:=coct+1;
    ELSIF stmonth ='NOV' THEN
              cnov:=cnov+1;
    ELSIF stmonth ='DEC' THEN
              cdec:=cdec+1;
    END IF;
             stdt:=add_months(stdt,1);
             i:=i+1;
    END LOOP;
    END LOOP;
    END LOOP;
    END;

  • How can i use the same front panel graph in more than one events in an event structure?

    i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
    Solved!
    Go to Solution.

    Hi,
    I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
    Regards,
    Nitzz
    (Give kudos to good answers, Mark it as a solution if your problem is Solved) 
    Attachments:
    Graph and shift registers.vi ‏12 KB
    graph and local variables.vi ‏12 KB

  • How can we use the same package in our report used by some other report

    how can we use the same package in our report used by some other report

    Hi,
    You just need to assign package while saving your report.
    No extra is required providing you are aware of package to be used.

  • To test how can we use the opt  'logical file name' to name the file based

    Hi Sir/Madam,
               to test how can we use the opt  'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.

    Hi Vishali,
    In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
    Rest of the process is same as that of extraction from local file.
    Regards,
    Durgesh.

  • When I upgraded to ios 5, it asked me a for a new game center name.  How do I use my old game center name, since it makes me start some games over without it?

    When I upgraded to ios 5, it asked me a for a new game center name.  How do I use my old game center name, since it makes me start some games over without it?

    Carefully follow steps 1-9 outlined by wjosten in this post: https://discussions.apple.com/message/13356770#13356770.  This will not, however, avoid wiping any non-purchased media from your phone (ripped CDs, etc.) as this is only synced one way: from your computer to your phone.  You will have to either rebuild your iTunes library with this content and sync again to restore it to your phone, or purchase 3rd party software to copy it from your phone to iTunes prior to syncing (such as Touch Copy).

  • How can I get the same candy crush level on my phone and iPad?

    How can I get the same candy crush level on my phone and iPad?

    The only way to synchronize is connecting to FaceBook. I just set up my girl friend's iPhone to connect with FaceBook, which then updated the phone's level; then I downloaded the app (again) on her iPad and selected connect to Facebook. I'm not sure what the downfall of synchronizing through FaceBook is.... all I can tell you is it worked and now her iPad shows the same level as her iPhone. Good luck!

  • Can I use the same email address on two different iPads?

    Can I use the same email address on two different iPads?
    Jackie

    I use AOL for my work account, I can open an email on my iPad, my iPod Touch, my iMac, another iMac in the office and there are no issues at all. However, my AOL account is IMAP. I read email on the iPad, turn around and read and print from the iMac and someone else is accessing the email at the same time.
    We access the same emails all the time as we have one generic email address that we both use. We like to multitask with AOL.

  • How can I use the same "I Tunes" on two different computers

    I’m using two different kinds of Personal Computer: One is Desktop PC And the other one is Notebook .
    In each computer there are the same songs and when I get the new ones to the Desktop I want them to be placed on the Notebook or reverse.
    Where does the I Tunes save the playlist on the hard drive ?
    I have prepared a playlist on my Notebook and want it to be seen on the Desktop but I dont want to fallow the steps File > Library > Export Playlist on the Notebook. Is there any other way to make this issue instead of the mentioned steps.
    How can I see the same Playlists and songs on two different computers ( notebook and desktop) including the updating processes.
    Operating systems of the computers:
    Desktop: XP Pro
    Notebook: Vista Bussiness

    I use SyncToy 2.0 to keep two instances of my library in sync. SyncToy's preview will show which files it is about to update giving you a chance to spot unexpected changes and during the run only the changed files will be copied saving lots of time.
    As long as I sync after making updates at one instance of the library before making any updates at the other then everything works just fine. I periodically run iTunes Folder Watch to check for any orphaned entries or new items that haven't been imported into the active library. If your machines are regularly networked together this process is fairly straightfoward. Mine are in disparate locations so I use one of the (physically) small WD My Passport host powered drives which I take between home & work, synchronising at either end. This gives me three complete copies of my library so I'm covering backup & synchronisation in the same operation.
    When connecting my iPod at either location iTunes recognises itself as the "home" library for the iPod so I'm able to use the sync with selected playlists option without getting warning messages about the iPod being synced with a different library.
    tt2

  • Can I use the same nike+ sensor with two differet Ipods and register the trainings in onmly one account?

    Hello, I would like to know if I can use the same nike  Ipod sensor with two different ipods. I want to use the same sensor sometims with an Ipod touch and sometimes with an Ipod Nano, I want my trainings with both Ipods to be registered to the same account. I want them to be registered to only one account, not as it had been used by two different people.

    Of course. You should use the same AppleID on all your devices. Why would you create a new one?
    Matt

  • 1 app, 3 devices, 1 iCloud - how can I run the same game on different devices?

    My wife and I share one iTunes account and one iCloud account for 2 iPhone 5's and an iPad.  Our home laptop is a PC running windows 7.  We are not able to both play the same game (specifically Carcassone) at the same time on different devices which is frustrating, how can I make this happen?  Do I need two separate accounts?  Can I have two accounts with a PC?  We don't want to sacrifice the photostream to get it though.
    Thank you,
    Jacob

    Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
    When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
    Therefore, remembe the passcode that you enter this time.
    It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

Maybe you are looking for

  • New Pricing Procedure

    Hi Gurus -- I have to set up a pricing procedure in which calculation for allowances(discounts) should not happen during PO Creation and all discounts should go to a single GL account during goods receipt and invoice verification .i am not sure what

  • Re: IMpact in changing company code to company relation not during monthend

    Hi Guru I would like to know your opinions about the impact that may arise in changing company code - company relationship during the mid month(not exactly mid month - anytime expect month end )? If there is an impact what would be the best approach.

  • HAL 9.3.1 Essbaes Adapter Error

    We recently migrated from Planning 3.5.1 to 9.3.1 and are still using HAL. In several of our Integrations we were able to pull in the new adapters (Planning 9.2 and Essbase 9.2 - we had to use this older Essbase adapter because the newest version was

  • Problem in creating workspaces..Please guide

    Hello All, Am facing a problem in creating workspaces in DTR. Am working on EP7 SR2 (SP9) Have read mostly all related posts on SDN but cannot catch the missing link...Please guide me for the same: <u><b>setvars.bat</b></u> @echo off rem Default prop

  • Extreme quality problems

    Ok, I'm editing together several hundred pictures at a time to create a stop motion animation in Final Cut Express HD ver. 3.0.1 Each clip is on average a 5 second clip comprised of roughly 100 pictures. I've got the picture duration set at .02 secon