How can I use the same Sound variable for multiple sounds?

I need my program to play many different mp3 files at different times. I'm reading that you can not load different mp3 files into the same Sound variable. But there must be a way around this right? Can I Unload mp3 files some how? Or can I delete the Sound variable and declare it again? I don't want to have hundreds of Sound variables so what do I do? Thank you.

delete doesn't work in as3. you must remove all listeners and references including nulling the variables. for displayobjects, they need to be removed from the display list.
p.s. you don't need to create a sound instance until you need to load an mp3 using one. so, if you're waiting for user input to start loading an mp3, you should wait for that input to create that sound instance.

Similar Messages

Can I use the same Apple ID for multiple devices

Can I use the same Apple ID for multiple devices?

Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

Can I use the same email address for multiple seats in Creative Cloud for Teams?

Can I use the same email address for multiple seats in Creative Cloud for Teams?

No. http://www.adobe.com/products/creativecloud/faq.html
Can I buy more than one membership to an individual offering of Creative Cloud?
No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

HT201303 Can I use the same Visa card for multiple accounts?

Can I use the same Visa card for mine and also my partners apple account? Or is it one card can be linked to only one account?

You can use one card for a few account. I would believe it you attempted to use it on too many accounts (5+), it may cause some issues. But using the same card on two accounts is fine.

HT5312 Can I use the same rescue email for multiple accounts?

I have multiple accounts and would like to use the same rescue email address. I've already verified the first account, but when I try to add another account a message says it's already verified for another Apple id.

I haven't tried it, but the message that you are getting implies that you can't. The rescue email address that I have on one account is the same as the primary email address that I have on another account - that's an alternative.

Can we use the same credit card for multiple customers???

One of my clients has a requirement where they need to use the same Credit Card number for multiple customers. I have looked into the possibility of using the 'Alternate Payer' functionality but besides that is there any other way SAP can be tweaked to accept the same credit card on multiple customer accounts?
Thanks in advance for any help or guidance you may provide.
SJ

I know SAP throws an error message which is why I was looking for a solution. I do have a work around. By pointing to an 'Alternate Payer' on the Payment Transactions tab on the customer master you can have a credit card on this alternate payer master record and use this payer on several other customers. All these customers will not have any credit card stored on their master records.
Thanks for your response though.

How can you use the same Apple ID for music and apps but have a different iCloud

Collectively in my family we have 1 iPhone 2 ipod(4th gen) and 3 iPad mini's and we like to buy music and apps through the same Apple ID so that we can all share it but we also have a problem about the iCloud.
My son has one iPod and one iPad and he would like his contacts and messages to be shared between HIS two devices but he would also like all of the pictures taken in the family to be shared
The same for my daughter and for me.
Is there a way of selecting which devices share what????
Thanks a lot
Acwills

You could and should set up different iCloud accounts in "Settings > iCloud", so that every user has its own email account, calendars, reminders, notes, storage for backups and app data (files etc.), by the way everyone could also use his own account for iMessage (Settings > Messages > Send & Receive) and FaceTime (Settings > FaceTime) so that you all could write and call each other.
Next the Apple ID for music, apps and other media: You all could just set up the ssame Apple ID in "Settings > iTunes & App Stores" for all your media purchases like songs, movies, apps etc.

How can I use the same event case for different controls dynamically

OS: Linux 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
LabVIEW: Version 8.2
I have a lot of (about 50) controls (numeric, boolean) on my front panel. If a "Value Change" event will be fired by any of them the same event case shall be executed. As I do not want to add all 50 controls to the same event case manually I am looking for a way to do it at run time. Additionally the VI is still under contruction, i.e. controls will be added and removed.
Thanks for any help here.
Regards,
Johannes
Solved!
Go to Solution.

Hi Johannes,
collect all your control references (you can use the FP property for it) and create a user event. Connect this user event to your event structure. Now you have one event case for all your controls. See the attached picture.
Mike
Attachments:
Unbenannt1.PNG ‏11 KB

Can I use the same media clips for multiple movies?

What I'd like to do is import about 15 - 20 hours of camcorder footage, and use that to cut several different iMovies. These are home movies that cover about 5 years, so I'd like to make a Halloween movie using just the halloween clips, and then make a christmas movie, and a birthday movie, etc.
Is there a way to do this without having every separate iMovie import its own clips? Or in other words can I have all of my imported media sharing by multiple iMovies? Any suggestions?
Thanks,
Anthony

Welcome to the forum, Anthony.
It's a good question, with no easy answers. Every few weeks someone asks a similar question here. They plan to import many hours of video into iMovie, then build multiple projects from that video. Some have already imported the video and are trying to deal with a huge, unmanageable project.
iMovie isn't designed to share Media files -- the video files iMovie HD imports to the Media folder of the project package. (To look inside the package, Control-click on the package icon and choose "Show Package Contents" from the popUp menu.) Rather, iMovie HD requires each project has its own Media files.
iMovie HD is a non-destructive editing environment, which means the entire Media file supporting a clip "sticks" to the clip -- the entire file. The file is never shortened. The file is discarded by iMovie only if you discard every clip associated with that file. In other words, stuff tends to stick around. And the stuff of 15-20 hours of video is large enough to fill a huge hard drive. So we're talking lots of stuff x 2 or 3 here, which is a lot of stuff.
As you import the video, iMovie HD creates a new Media file at each scene break. Some of those files can be very large -- 12 GB if the hour has no breaks -- so before long your multiple projects are consuming huge amounts of disk space. Although you can Copy and Paste clips between projects, doing so duplicates the entire source file of the clip. So a 20 second clip that's part of a 4 GB Media file that you Copy from Project A to Project B now consumes an ADDITIONAL 4 GB of disk space in Project B.
When projects reach huge, many users give up in frustration. They've invested lots of time accumulating the video, but they have so much stuff they don't know what to do with it. And sometimes the project size causes iMovie to choke.
Everything is a lot easier if you plan ahead. Plan WAY ahead. Consider importing just the video you need for each of the (small) projects. Finish one project at a time, then move on to the next one.
The trick is to view all the video before you begin, and make an index of what video you want to keep, what you want to discard, and what video goes in each (small) project. Use the timecode of your camera to log the location(s) in your index. (If you're using iMovie to view the video in the camera, you might want to take screen captures.)
When you are done making the index, you are ready to build the Halloween project. Import the Halloween chunks from all the tapes to a Halloween project, edit it, and burn it to a DVD, export it back to a new "Halloween" camcorder tape, or do whatever you want with it.
Don't miss that if you import all the Halloween clips to a project, you can export that project back to a new tape in the camcorder. The clips will (usually) retain their clip-ness, so when you re-import that tape to a project the clips will come back as discrete clips. Tapes can be useful place to store clips temporarily, or as permanent vault organized by topic.
Good luck with your project. It'll be fun, but it's going to take a while. Relax, take your time, and enjoy it.
Karl

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

How can i use the same cursor in a loop fro multipletimes.

I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
I am sending the code which i have written in When-Button-Pressed-Trigger...
declare
     sid number;
     pid number;
cursor csid is select distinct(site_id) from cyber_ppt;
cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
     stdt varchar2(10);
     eddt varchar2(10);
     nom number;
     stmonth varchar2(10);
     edmonth varchar2(10);
     cjan number:=0;
     cfeb number:=0;
     cmar number:=0;
     capr number:=0;
     cmay number:=0;
     cjun number:=0;
     cjul number:=0;
     caug number:=0;
     csep number:=0;
     coct number:=0;
     cnov number:=0;
     cdec number:=0;
     i number:=1;
begin
     open csid ;
     loop
     fetch csid into sid;
          exit when csid %notfound;
          message(sid);
     open cpid;
     loop
     fetch cpid into pid,stdt,eddt ;
     exit when cpid %notfound;
     message(sid||'-'||pid);
     stmonth:=substr(stdt,4,3);
     edmonth:=substr(eddt,4,3);
     nom:= months_between(eddt,stdt);
while i <= round(nom)
     loop
     stmonth:=substr(stdt,4,3);
if stmonth='JAN' then
          cjan:=cjan+1;
elsif stmonth='FEB' then
          cfeb:=cfeb+1;
elsif stmonth='MAR' then
          cmar:=cmar+1;
elsif stmonth='APR' then
          capr:=capr+1;
elsif stmonth='MAY' then
          cmay:=cmay+1;
elsif stmonth='JUN' then
          cjun:=cjun+1;
elsif stmonth ='JUL' then
          cjul:=cjul+1;
elsif stmonth ='AUG' then
          caug:=caug+1;
elsif stmonth ='SEP' then
          csep:=csep+1;
elsif stmonth ='OCT' then
          coct:=coct+1;
elsif stmonth ='NOV' then
          cnov:=cnov+1;
elsif stmonth ='DEC' then
          cdec:=cdec+1;
end if;
     stdt:=add_months(stdt,1);
     i:=i+1;
     end loop;
     end loop;
     end loop;
     end;


try this /* untested */
DECLARE
sid           NUMBER;
pid           NUMBER;
CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
stdt        VARCHAR2(10);
eddt        VARCHAR2(10);
nom         NUMBER;
stmonth     VARCHAR2(10);
edmonth     VARCHAR2(10);
cjan         NUMBER:=0;
cfeb         NUMBER:=0;
cmar         NUMBER:=0;
capr         NUMBER:=0;
cmay         NUMBER:=0;
cjun         NUMBER:=0;
cjul         NUMBER:=0;
caug         NUMBER:=0;
csep         NUMBER:=0;
coct         NUMBER:=0;
cnov         NUMBER:=0;
cdec         NUMBER:=0;
i            NUMBER:=1;
BEGIN
FOR rec IN csid
LOOP
                  sid := rec.csid;
FOR cRec IN cpid(sid)
LOOP
                 pid := cRec.pc_id;
                 stdt := cRec.st_dt;
                 eddt := cRec.ed_dt;
stmonth:= SUBSTR(stdt,4,3);
edmonth:= SUBSTR(eddt,4,3);
nom:= months_between(eddt,stdt);
WHILE i <= round(nom)
LOOP
          stmonth := SUBSTR(stdt,4,3);
IF stmonth='JAN'
THEN
         cjan:=cjan+1;
ELSIF stmonth='FEB' THEN
         cfeb:=cfeb+1;
ELSIF stmonth='MAR' THEN
          cmar:=cmar+1;
ELSIF stmonth='APR' THEN
          capr:=capr+1;
ELSIF stmonth='MAY' THEN
          cmay:=cmay+1;
ELSIF stmonth='JUN' THEN
          cjun:=cjun+1;
ELSIF stmonth ='JUL' THEN
          cjul:=cjul+1;
ELSIF stmonth ='AUG' THEN
          caug:=caug+1;
ELSIF stmonth ='SEP' THEN
          csep:=csep+1;
ELSIF stmonth ='OCT' THEN
          coct:=coct+1;
ELSIF stmonth ='NOV' THEN
          cnov:=cnov+1;
ELSIF stmonth ='DEC' THEN
          cdec:=cdec+1;
END IF;
         stdt:=add_months(stdt,1);
         i:=i+1;
END LOOP;
END LOOP;
END LOOP;
END;

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How can we use the same package in our report used by some other report

how can we use the same package in our report used by some other report

Hi,
You just need to assign package while saving your report.
No extra is required providing you are aware of package to be used.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Can I use the same iTunes account for 2 iPads without having the same apps on both?

Can I use the same iTunes account for 2 iPads without having the same apps on both? Everytime I try to sync my new iPad, it syncs all the apps that are on my account. If I can do this, can someone tell me how please???

Yes you can, easily. When you plug the first pad in to sync, note the name of the pad on the last pane. Set up for that device whatever you want to sync. When you are done, plug the second pad in. Make sure it has a different name on the left pane. Then sync to that pad whatever you want. I tunes will remember what you did on each pad, and will start from there the next time you plug in.

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

How can I use the same Sound variable for multiple sounds?

Similar Messages

Maybe you are looking for