How can I use the "Save As..." feature in Pages or Text Edit again?

After updating both the programs to Lion OS X standards, it has lost the functionality to do so.

Thank you!
Unfortunately, I gave the "Correct Answer" to myself by mistake. I didn't think I could do that. I'll give the "Helpful" anyway.

Similar Messages

How can I use the hardware compare feature of the 6551 card to trigger scripts

I can dynamically and seamlessly generate different waveforms by triggering different scriptTriggers that drive one or more of the 4 PFI lines. However, I need to evaluate a channel at a specific location or locations set by a script marker in real-time and generate a different waveform stored in on-board memory based on the result of the evaluation. I have attempted to use the hardware compare feature without any success. I am trying to dynamically respond to an I2C device based on the ACKs or NACK response of the device under test. Can the 6551 card accomplish this? Has anyone successfully tested an I2C or SMBus communication stream with 6551 card?

Hello,
I can understand why hardware compare did not work out for you application. Hardware compare uses a signal that was generated to make a digital pattern and then waits a few clock cycles before acquiring the signal that needs to be compared to the digital pattern.
I would look into using a script trigger to evaluate the channel value, where the script structure controls when it is evaluated. Please note that script triggers will need to be cleared after they are detected for reasserting. Some script syntax actually clear the script trigger and then use a wait until script trigger structure. Please refer to the HS DIO Help for documentation on Common Scripting Use Cases.
Please provide us with further details about your application. The more information, the better! I was not too clear on what you where wanting to evaluate and where is it coming from.
I would also like to mention that National Instruments has a NI USB 8451 which is capable of I2C communication.
NI USB 8451
Samantha
National Instruments
Applications Engineer

How can I stop the execution on a JSP page and start it again

Hi
I am making a program that simulates how to manage transactions when accessing a database by using locks. I have run into a problem and I hope someone has the time to help me.
When a user does an update the transaction commits and releases its locks when the program executes
<%stmt.executeUpdate("commit!"); %>
I need to put a break in to stop the program executing this statement, to illustrate the lock is set correctly.
I have tried to put in an alert box but this does not prevent the rest of the java code being executed.
I have tried to use prompt boxes, JavaScript functions, but these functions cannot have any java code in them.
I have tried using the java.swing JOptionPane boxes but this didn?t work either
I have tried to get input from the user but I don?t know how to retrieve this data on the same page. (As far as I know you have to use submit and even refresh the page or retrieve it on the next page).
Does anyone know how I can stop the execution on a JSP page and start it again (on same page)
Mette

I already have another client (Tomcat jsp application) running and it throws a SQLException correctly when I don�t put in a commit=true statement and don't close the database connection.
But the problem is how to get the code above to stop to illustrate I have set this lock.
I have tried to use the JOptionPane but because my program is running in a web browser I cannot use the JOptionPane dialog box.
I have tired using an alert box but it executes the commit statement before the alert box is dispayed. So this does not work
While (i < 2)
if( i==1)
%>alert(�The transactions commits when you press Ok�); <% //what it to stop execution here
else
stmt.executeUpdate(�commit�);
I am not using threads so I cannot use the sleep function.
I am using mysql and have already configured it to detect deadlocks and how long to wait for locks.
Thanks for your help
Mette

How can we use the table partitions feature and.........

Hai friends when i tried to use the bitmap indexes and table partitions feature ,
I got a message like this
'table partiotion feature not enabled'
so please tell me how can i enable those features so that i will be able to use those features..........

Partitioning and Bitmap Indexes are features of Oracle Enterprise addition. In fact, I think that Partitioning is an extra option that needs to purchased with Oracle Enterprise - it is not a default feature.
These features do not exist on Oracle Standard Edition (and likely Express Edition too).

How can I use the "create book" feature without having my album photo sequence altered

I have created an album with photos that are in a particular order for a reason. I then process to create a book. The template then rearranges all my photos. Is there a way to keep them in the original order I set up?

All the 5000 photos that reappeared after repair today were from my canada mega event, but for some reason it did not do it for all the other mega events. It is a start but not complete.
Try the rebuild to recover more lost photos.
If "rebuild" with iPhoto does not recover more lost photos, rebuild with iPhoto Library Manager as described by Old Toad in this thread, but rebuilding with iPhoto Library manager will not recover your projects like cards, bilks, slideshows.
Re: iPhoto glitch with retained masters https://discussions.apple.com/message/26354337#26354337
Mostly the way I organize all my photos is that I make a folder for each country I visit. i.e. New Zealand Folder, Canada Folder, India Folder; and at the same time, any photos that I import I delete directly from new imports and just keep the ones i want and then i go up to events and move the latest imported event into a mega event for that country and so they all get joined in a sense.
As a workaround, merge the events right after importing, before you start deleting photos. And empty the trash always before merging projects.
You might consider to use albums instead of events for your country lists. I simply use the events as basic containers. One event for each day of shooting photos. I found, that smart albums and searches are quicker in iPhoto and Aperture, if the events are smaller, also browsing is easier, if the events are not so large.
You can merge albums and remove photos from albums without the problems mentioned above.

How can I use the scroll wheel to move page by page

I have Adobe Acrobat 8 and I would like to be able to use the scroll wheel in my mouse to move page by page instead of the page icons in the tool bar. I recently had my computer updated from Windows XP to Windows 7 and I used to be able to do that in XP. I do a lot of moving around in documents and it's easier to move page by page if I don't have to be moving the cursor all the time.
Any help would be greatly appreciated as I don't want to everything else (like Office 2007 Word) to move whole pages with the scroll wheel, just Acrobat.

Make sure that View - Page Display - Single Page View is selected in
Acrobat.

How can it be the Mobile Hotspot feature worked, failed, and then worked again?

I am having a love hate relationship with my Galaxy S3. The latest experience happened when I arrived at the beach expecting to connect to the Internet through a mobile hotspot established on my Galaxy S III; but that was not to be. When I turned on my Macbook it could not find the mobile hotspot named Cavanaugh established a half hour earlier with help from a Verizon Wireless Sales Consultant, and all devices were allowed to connect. What could cause this inconsistency!
I went home and as I customarily do I plugged my cell phone into its charger. The battery had 44% capacity left, I like to recharge to 100% at the end-of-day, so I recharged the cell phone to 100%. Guess what? With the cell phone battery fully charged the mobile hot appeared on my notebook, and I connected the notebook to the Internet through the cell phone.
Has anyone else had a similar experience? How much battery juice is needed to run mobile hotspot?

While I am unsure how much battery is "needed" to run the hotspot, the battery WILL drain faster when the hotspot is active. Quite possibly, the phone will deactivate the hotspot when the battery falls below a certain level.
This is the reason I ONLY have my hotspot turned on when I want to use it. I don't see a reason to have it active when not using it, along with the "possibility" of someone hijacking my signal in order to use my data stream without having to pay for it.

How can I disable the "faces" recognition feature in iPhoto. I don't use it and find it very annoying. Thank you.

how can I disable the "faces" recognition feature in iPhoto. I don't use it and find it very annoying. Thank you.

I am afraid you will just have to ignore it.

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

How can I use the iPhone 4s as a usb drive?

How can I use the iPhone 4s as a usb drive?

I'm not sure about the original iPhone, I didn't have one, but the iPhone 3G did not have a disk mode feature.

I am running a laptop with windows 7 on it and trying to use the save as feature in Photoshop CS6 and won't let me save as anything. Please help?

I am running a laptop with windows 7 and am trying to use the save as feature in Photoshop CS6 and it wont let me save as anything. Can someone please help me with this?

A screenshot of your Photoshop work area showing the open file you want to save as, the Layers panel open, and the Save as... dialog open might give us a clue as to what is going on.
To take a screenshot and save it as a file
For Windows 7, Printscreen, open a New File in Photoshop, Ctrl v to paste, then save as jpeg (the other trick was for windows 8)
Use the Camera icon on your reply to upload it.
Also File > Save for Web is a good workaround if you just need a jpeg, png, or gif.
Gene

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4?

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4 ?
It appears that I can not link the templates which I have been using in Bridge for some time to Lightroom 4.4.
Is this done on purpose?
Thanks in advance
Doppy

I assume these are metadata templates?
in Bridge, apply a template to an image which has no other metadata (eg a dummy image ) and then import the image into Lightroom, ensuring no metadata applied in the Import dialog. Now in Lightroom's Metadata panel, save the metadata as a new Metadata Preset.
Repeat for each template.

How can I use the mousewheel to scroll forward and back in Safari?

I really like Safari. As I see it, the only short coming is a feature that is present in Internet Explorer and Firefox. In both of these applications I can hold down a modifier key (CTRL) and roll the mouse wheel to go back 1 page in history. I would be really glad to know how to do this in Safari, as just about everything else I can do in IE and Firefox is in Safari. This roll back feature is one of the things I use more often than almost anything else.
Question: How can I use the mousewheel to move backward in the browser history?

Yes, I could move my hand from the mouse to keyboard to use a key combo... I could even use the delete key... but it's not really as effient as using the mouse's scrollwheel. Not that it's really all that bad, since Firefox is a great browser, but am I stuck with it if I want that one solitary additional feature?

Why are menus grayed-out in trial version? how can I use the effects then?

why are menus grayed-out in trial version? how can I use the effects then?

Every piece of software has a learning curve, and its own terminology. After Effects is a complex professional tool, used by home enthusiasts right through to feature film makers.
There's plenty of very user friendly video editing software that will do the tasks you've mentioned easily. Might I suggest Adobe Premiere Elements.
For the record, you can't apply an effect to anything in After Effects until you have selected a target layer in the timeline. This functionality is true of any video editing or compositing software I can think of,

How can I use the "Save As..." feature in Pages or Text Edit again?

Similar Messages

Maybe you are looking for