How can I use the Unity Connection 10.5 Greetings Administrator with e.164 CallHandler extensions

We recently upgraded to CUCM 10.5 and CUC 10.5 using an e.164 dial plan throughout. One snafu that has surfaced is how do people access a CallHandler via the Greetings Administrator TUI if the CallHandler extension begins with a '+' character? Pressing and holding * does not seem to work. Any ideas?

Similar Messages

How can i use the NI USB-6501 digital I/O with matlab?

I want to use the NI USB-6501 digital I/O with data acquisition toolbox in matlab?

The USB-6501 is supported by Data Acquisition Toolbox in MATLAB releases R14SP3+ and later.
The full list of National Instruments devices supported by Data Acquisition Toolbox is here:
http://www.mathworks.com/products/daq/supportedio14005.html
Begin to learn how to use digital input and output here:
http://www.mathworks.com/access/helpdesk/help/toolbox/daq/f11-17944.html
Inside MATLAB you can view demos in the documentation.
To see two digital demos you can type these commands at the MATLAB command line:
>> showdemo('demodio_intro')
>> showdemo('demodio_line')
Best regards,
Sherryl
Sherryl Radbil
Data Acquisition Engineer
The MathWorks

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

How can I use the gps without internet in my Ipad3 - 4G

How can I use the gps without internet in my Ipad3 - 4G. Do I need to download any additional app than the one that already came with it?

The Maps app included in iOS, at least as of the current version, requires an Internet connection, so you'll need to get an app that allows you to download maps to be kept on the iPad. MotionX GPS Drive is one such app, but there are others available.
Regards.

How can I use the battery and let it be perfectly healthy?

Hello everybody!
I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
(Right now I'm performing the battery calibration)
I'd like to know how can I use the battery and let it be perfectly healthy.
For instance,
1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
2) I usually use to calibrate the battery once a month... Is it a good thing?
Thanks!
Andrea

Everything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
http://discussions.apple.com/thread.jspa?threadID=1764220

How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac? There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac? Thanks ...

Thanks again!
Hmmm ... I wonder. The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it). When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones. I will certainly try your solution - what do I have to lose? If they don't work, then I get new ones - or try something else.
Many thanks for your time!

HT4847 i have 5gb of icloud storage, used 2.5gb but it wont let me unlock the other 2.5gb of storage. How can i use the remainig 2.5gb of storage?

i have 5gb of icloud storage, used 2.5gb but it wont let me unlock the other 2.5gb of storage. How can i use the remainig 2.5gb of storage?

I got rid of AMDS, ASU ,QuickTime and iTunes from control ones I also found folder in Vista with D:\Users\Rick\Music\iTunes\Previous iTunes Library and there is one dated 2009-03012.itl. I moved this file up one folder and delted existing iTunes Library.itl. iTune still failed to identify my iPhone. There are other files iTunes Library Extras.itdb, iTunes Library Geniyes,itdn and iTunes Music Library,xml date dtd 06/18/2009 after upgrade except the latter which is date 06/23/2009. So something is not allowing me to pull or put everything back to when it worked.
YES this is my only iPhone and only PC I have access to with iTunes.
Here is what Apple gave to someone Sunday 28 June:
http://discussions.apple.com/thread.jspa?threadID=2035950&start=75&tstart=0
I checked these out too and they appear the same printed out nearly a week prior. I agree with Coach TO, if I had bad drivers or Vista errors it would not have shown up only when I updated to latest Version of 8.2.023. My Phone was identified on a PC with iTunes at the local AT&T store. He suggested I get phone into Recovery made while connected to iTunes and that resolves the problem 9 out of 10 time. Weak spot was he tried to get phone into Recovery without iTunes connection and thought I may have iPhone problem, then changed his mind when it worked while connected. He also stated it could take an hour. I have not tried to put my iPhone in Recovery lately, I think I did a while back and it failed to go into Recovery as error "iPhone detected by, not identified..."Has anyone tried forcing phone into Recovery? I understand you may lose all that is on phone. If iTunes still fails to identify would we not be in worse shape even if iTunes holds a recent backup which it does not for many of us? Will Apple take back or exchange phone if yours is not identitifed, AT&T today told me I had to go to Apple Store for this or anything to happen.

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How can I use the QR codes with my iPad 2. do I need to download first an app ?

How can I use the/read the QR codes with my iPad 2 ? Do I need to download an app ?

Yes. There are quite a few available for free in the app store

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

HT4314 I have a game under one account, now I have an Itunes card under a different account, how can I use the $$$ in the card for the game I'm playing, I need to purchase different items for my game.

I have been playing a game for a while under an account, now I have an Itunes card under a different account and would like to use that $$$ to purchase items for my game, but it doesn't let me because the game was downloaded under the original account. How can I use the $$$ in my new account?

same here but i cant purchase a movie or anything

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

I have two iphones, different telcos, i am using the same apple id for both - how can i use the 10GB icloud free memory of my new iphone 5?

Thank you KiltedTim!
YES, that is the free 5GB icloud memory for each apple ID. Can I not add the free 5Gb of my second Iphone to my original apple ID (5GB also) as I want to use one Apple ID name on both 2 Iphones? Is it necessary to have a different apple ID for the second Iphone to avail the free 5GB it carries with it?

How can I use the Unity Connection 10.5 Greetings Administrator with e.164 CallHandler extensions

Similar Messages

Maybe you are looking for