How can I use Time Machine with my existing network attached storage drives

I am a new mac user switching over from windows and have an extensive amount of existing equipment including 2 network attached storage devices (Buffalo Technologies). I would like to use these with Time Machine, but can not figure out how to do it. When I enter time machine setup it does not show these drives while the Finder does.

As of right now we are all SOL unless you own a Time Capsule. At the very least I wish apple would offer some kind of trade-up if they are not going to release a software update.
It really doesn't make any sense why we can't do this with a standard AEBS. Any fix should just be a matter of software, and while technically apple covered its butt with that little "subject to change" disclaimer on the leopard preview page, pulling it at the last minute and expecting those who believed their advertisement to buy another device that does the exact same thing for more money is just wrong. Give us a break apple, tell us your at least working on a fix, its the right thing to do.

Similar Messages

  • How can i use time machine with a network drive

    I have a Western Digital Net N900 wireless router with a 2TB internal H/D. How can I get Time Machine to reconize it?

    Relying only on TM to me is iffy but I would bet you have clones in addition to TM like I do.  I agree with everything you said but to the OP question, it is possible.  A time capsule or AEBS+HD are pretty similar but one is officially supported while the later is not.
    Since I'm rambling a bit I will add this.  I only use TM for the times I delete something and then wish I had it back.  All my restores or migrations are done from my clones.  One clone is made weekly and is a snap shot of my system.  One clone I keep remotely located and is updated monthly.
    My system:
    Internal 1TB
    Ext HD1 2TB (1TB data, 1TB clone)
    Ext HD2 2TB time machine backup (internal + HD1 data, not the clone)
    Remote 1TB clone
    I'm fully redudant with my method and it has saved me before.

  • Before downloading lion, i want to backup my computer with time machine and a G-DRIVE Slim.  But how can i use time machine to only backup my system once?

    Just wondering, how can i use time machine to only backup my system once? Just this once and not on a weekly basis?

    Upgrade. My three year old Mac Pro and year old MacBook Pro have no problem. Both seem faster.
    And there's your problem reading entirely subjective views on forums, from people that might or might not have decently maintained systems, good operating practices, or whatever.... 
    Strangely, when most companies issue new software, it is because they believe (and believe they have checked) that it is better than the previous version.

  • How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
    Click Time Machine
    Click Options
    Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
    The drive will be backed up on the next Time Machine pass
    Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

  • I am trying to get an answer to whether or not I can successfully use Time Machine with an external HDD connected to an airport extreme?  Some forums say yes, some say no.

    I am trying to get an answer to whether or not I can successfuly use Time Machine with an external HDD connected to an airport extreme.  Some forums say yes, some say no.  I'm also curious about formatting the hard drive to work both on my wife's MacBook Pro and my PC.  Any help would definitely be appreciated.

    You may be going on a recollection, that I share, that at one time Apple stated this would be possible:
    In fact, Apple’s Time Machine Web page touted this very capability as recently as last Tuesday, as you can see from Google’s October 16 cache of the page
    Effortless meets wireless. With a hard disk connected to your AirPort Extreme Base Station, all the Macs in your house can use Time Machine to back up wirelessly. Simply select your AirPort Disk as the backup disk for each computer and the whole family can enjoy the benefits of Time Machine.
    But if you look at the current Time Machine page on Apple’s Web site, that text is nowhere to be found.
    That was a long time ago, it has never been officially implemented, and at present they specifically say it cannot be done.
    In summary, it may work, but probably won't, and even if it does it may not be reliable.
    Reference:
    Disks that can be used with Time Machine
    Time Machine can’t back up to an external disk connected to an AirPort Extreme, or...
    and
    Mac OS X v10.5: Time Machine doesn't back up to AirPort Extreme AirPort Disks

  • Can I use time machine to back up via a hard drive connected by USB to a HomeHub router?

    Can I use time machine to back up via a hard drive connected by USB to a BT HomeHub router? Is there a better way to back up and store files than via the USB port on my new MacBook Pro? I'd like storage to be accessible from my earlier version MacBook too.

    I think you want to make backups without connecting a hard disk via USB. In other words, you want to have the data storage be shared in your home wirelessly.
    If this is the case, I recommend using a Time Capsule.
    Time Capsule works great with Time Machine. You can set up all your devices to automatically make backups on the Time Capsule wirelessly and effortlessly.

  • How can I delete time machine back up from my computer hard drive

    How can I delete time machine back up from my computer hard drive?

    How to Delete a Time Machine Backup - YouTube
    If you want to remove an entire Time Machine backup on a backup drive, then the easiest way to do that is to erase the backup drive using Disk Utility. However, this will delete everything on the disk:
    Drive Erase Snow Leopard and Earlier
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
    2. After DU loads select the volume you wish to format from the left side list. Click on the Erase tab in the DU main window.
    3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.

  • How do I use time machine to backup to an external hard drive plugged into my airport extreme

    How do I use time machine to backup to an external hard drive plugged into my airport extreme?  I used to be able to but now time machine will not recognize my hard drive to select as a backup when plugged into my airport extreme.  I'm not sure what happened or changed.  Any help is greatly appreciated.  Thanks

    First thing to do is go to the Pondini tips page, then follow the link to his full TM site for all the details.

  • How can I use time machine to back up and play media?

    I just bought an external hard drive that I wanted to back up some media files onto (music and photos).  I also want to stove videos/movies on the hard drive and play them from there.  A few questions:
    1. Is that the same as backing up with time machine or is it referred to as something else?
    2.  Can I use time machine to add new files, or should I do that manually?
    3. Once the files are on my hard drive, can I remove them from my computer or should I keep them there?
    I know that these questions may seem obvious, but I'm concerned about losing files because I don't understand what time machine actually does.  Please feel free to ask me questions if you need to understand my question better.  Thanks!

    Time Machine makes a backup of your hard drive, which you can restore from, but not use as a repository of data.
    Time Machine automatically makes incremental backups as you change things on the Mac HD.
    Time Machine is not an archive, meaning if you make a backup, and then delete the originals from your Mac, Time Machine will eventually delete the copies it has made.
    However, if you copy the files directly to the external, then you can remove them from the computer. But, those will be your only copies. If that disk dies, they'll be gone. So, that's really not a backup. It's the only source.
    You can back up to Time Machine and also store other files on the same disk.

  • How can I use time machine to recover my iWeb09 files?

    I read that iWeb stores one's website pages in the domain folder which can be located at ~/Library/Application Support/iWeb. Can I use time machine to recover my iWeb09 files? If so, how? -I tried. I entered my Time Machine back up, and went back in time and brought the domain file forward but it opened only my current site pages, not the ones I am trying to recover. And it says the Domain file was last modified in October 2007 which is crazy because I've been using iWeb a lot and have published many pages. It seems like the uncorrupted pages, which I am trying to recover, existed somewhere on my computer at one point in time and space, less than a week ago, becuse I just published my site to a new hosting service since Apple will soon stop web hosting. So why can I not find them using time machine?

    I continued searching and read another person's advise to down load an app named "Find File," then search for .sites. She said spotlight doesn't always find all files. So I did and sure enough, when I searched for .sites I found another Domain package, which I have no idea how it was created but which, it ends up, was the one actually being used by iWeb. So I went to that package then did the time machine and went back to before my web pages became corrupted. I had to delete corrupt blog pages out of my website menu to get iWeb to upload the other page changes even to a local folder.
    So I went to that newly found Domain, went back in time, then brought that forward and as you pointed out the domain package had the parts of the pages, the files and jpegs, but not the structure/layout of the pages. So, I guess I gave up on finding the old pages.
    Those pages still exist on the Apple hosting server but iWeb doesn't not reverse publication. Cyberduck would bring back the files and bits and peices but again not the pages as a total entity. I'm preparing for the end of Apple website hosting (next month?) and am republishing my old site. I decided to use a new domain name. So my entire original site is still totally intact on the web under the original domain name, on my mobile me site, I guess it will be there till sometime in June?
    My problems started when I tried to publish my website to the new server. It just would not publish the whole website in one session. So I decided to do it a few pages at a time. Some pages went up, but as I added more, for some unknown reason the, blog pages, (about 70 subpages),  which had aleardy uploaded just fine to the new server, became corrupt and locked up iWeb. Of course once I deleted the corrupt pages I didn't want to continue publishing the site to the host until I found and reinserted uncorrupted pages, knowing publishing changes would delete the already published pages.
    At first I thought it was the hosting server's fault, but when I discovered that it wouldn't publish even to a local fold I was able to locate the cause within iWeb, deleted those pages then tested by publishing to a local folder. iWeb worked locally, so I knew I had found the problem pages. Well this is way more than you wanted to know. Thanks for your advise but I'll just start the blogging pages over.

  • How do you use Time Machine with more then one mac

    I just bought a new external hard drive and want to back up my iMac & MacBook Pro using Time Machine. But I do not want to use my airport network.
    I will keep the hard drive connected to the iMac, but want to, as needed, plug my MacBook Pro into the Hard drive to back up.
    Is this possible? Do I have first partition the new backup hard drive?
    Any help is appreciated... Jim

    Ok... I am back again.
    I decided to plug my backup drive into the USB port on the Airport extreme.
    On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time Anyway all is cool with that.
    My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
    Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
    I might mention that the reason I have the iMac connected with an ethernet cable and not wirelessly is because the iMac does not stay connected well to the internet and when it is connected has a very slow connection. My MacBook Pro is all the way across the house and has a great connection.
    I have guessed the slow connection was because the Airport Extreme sits right next to the iMac and maybe there is some kind of interference.
    Thanks.... any help is appreciated.

  • HOW CAN I USE TIME MACHINE TO BACKUP ONLY PART OF MY FILES ON EXTERNAL D?

    Hi, I am using time machine to back up all my files at the moment. but I want to get rid of video and photo material from my laptop and keep it on the external hard drive to which the time machine backs up my stuff.
    how can i do this without losing the video and photo files permamnently?
    thank a lot!

    nefsi wrote:
    doesn't time machine back up my files on the External hard disk?
    By default, Time Machine backs-up almost everything on your internal HD to your External HD. It can also back up things on an external HD, if you want it to.
    What I would like is, to find a way so that I could back up everything, but not have all the videos and photos I do not use often, on my laptop. instead I want to put them on the external hard drive and have time machine update all the other files.
    Yes, you can do that, but there are two considerations:
    You should partition the external HD so the TM backups are in one partition, and the other files are in the other partition. A partition (also called a volume), is treated like a separate disk for most purposes. See #3 in the Frequently Asked Questions *User Tip* at the top of this forum.
    You should find another way to back-up the videos and photos in that other partition, such as archiving them to CDs/DVDs.
    In other words, can Time machine back up only some of my files?
    Yes. You can exclude things from Time Machine. See #10 in the FAQ Tip. If you partition your TM drive, the other partition on it should be excluded automatically; but if it isn't, you can easily add it to the +Do not back up+ list in TM Preferences > Options.
    For detailed instructions on making another partition on your external HD, see #6 in the FAQ Tip. It shows how to add a TM partition to a drive that already has other data on it, but the procedure is the same.

  • Can i use time machine with a airport extreme and a external hard drive

    I have connected a hard drive to my airport extreme.
    Now i would like to use time machine to back up my computers, and would like to do this on the hard drive which is connected to my airport extreme.
    Next step is that i would like to be able to approach my external hard drive via the internet.
    Is this possible or not?

    Both are possible. However, Apple does NOT support Time Machine backups to AirPort Disks attached to the 802.11n AirPort Extreme Base Station (AEBSn). Doing so will potentially lead to data corruption and is highly not recommended. Please check out this excellent Pondini article for more details. This article also provides the Apple Support references that states Apple's position. Bottom line? If your backups are critical to you, then you may want to rethink your backup solution.
    As far as accessing the AirPort Disk from the Internet, the following is the basic steps to do so:
    Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Disks, and then, select File Sharing.
    Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
    Verify that Secure Shared Disks = With a disk password. (Recommended)
    Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
    In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
    Click on Update.
    To connect to the shared AirPort Disk from a remote location using a Mac:
    From the Finder > Go > Connect to Server.
    Enter the Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
    Click Connect.
    You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
    Click Connect.

  • Can I use Time Machine with a Network Storage Drive?

    I just picked up this drive http://eshop.macsales.com/item/Macally/NSA2S350NAS/ and I would like to use Time Machine for backups, and also use a different location on the drive for sharing files on our network. But this article http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html says that network server must use AFP. How do I set that up? I just have a simple network using a 4 port wireless router. I have no idea what protocol the network is. I just use the "Network" option to connect to my new drive at smb://192.168.1.105.
    Is this going to be possible or do I need to buy some other backup software???

    On a Mac G4 I'm running OSX leopard with Time Machine. I have my other Mac (8600)networked. The 8600 was upgraded with a G3 Sonnet and IDE card, so it'll support OSX and large hard drives. I want TM to back up to the 8600, is this possible?
    Thanks

  • I can't use Time Machine with a USB drive plugged into an Airport Extreme.

    I connected an external drive to the USB port of an Airport Extreme, intending to use it with Time Machine and one of the laptops in the Wi-Fi network (call it Laptop). The drive is visible from the Disks tab of each computer’s Airport Utility but from nowhere else, in particular not to Laptop’s Time Machine preference.
    Laptop is relatively new and arrived with Mavericks. Time Machine used to work on Laptop before I upgraded the rest of the network (a desktop Mac Pro and another laptop) from OS X 10.6 to Mavericks.
    The drive is formatted as Mac OS Extended (Journaled). I have tried other external hard drives, with the same behavior. The desktop correctly use Time Machine to back up its internal drive to another internal drive. Another possibly relevant factor is that our DSL connection has recently been upgraded, and now uses a 2Wire modem that provides its own router, so Airport Utility’s Network Router Mode is set to “Off (Bridge Mode)”.
    I would be grateful for suggestions of what to try next.

    Here is one from Pondini, who was the foremost Time Machine expert in the world.
    http://pondini.org/TM/Airport.html
    And another from Apple. Info near the bottom.
    AirPort base stations: About USB disks
    And another miscellaneous from Apple:
    AirPort base stations: Time Machine hard drive compatibility

Maybe you are looking for

  • IPhone 4s won't sync to iMac, isn't recognized as a device in iTunes or iPhoto.

    my iPhone 4s is not recognized as a device in iTunes or on my iMac. Doesn't show up in Wifi cloud sync as a device either. It's charging now via my iMac so the USB cord is good. I am on iTunes v.11.1.1 and Mac OS X v. 10.8.5. All other SW updates com

  • CR VS 2005 - How to change series label text?

    Hi... I got this problem while creating a chart in Crystal Report, hope someone can help me I'm using Crystal Report for Visual Studio 2005 and the type of the chart is 3D Riser. I would like to change the series axis (Y) label but it appears that it

  • General questions in abap programming

    hi i have some questions in abap. They are as follows. 1) What you like in SAP and what you don't like?(Interview question) 2) In LSMW please explain about 6th step, maintain fixed values, translations, user defined subroutines? 3) how to create view

  • Can we edit Text ?

    I - for the life of me - can't find a way to edit text on it's layer once the check box has been clicked and the text layer is made... We can transform, size, skew etc., using the tools under the move tool icon but I can't seem to find a way to actua

  • What to watch for in Lion (migrating settings etc)

    hi all. i have update the desktop and the laptop to Lion and noticed that the screen background did not migrate on the desktop, that i had to fix the scroll wheel direction and the i am was missing my Transmit Application for some reason (I re-downlo