How can I use two differant iphones on one itunes

I can i use two differant iphones on one itunes, and keep the content seperate?

You can sync as many iphones/ipod/ipads as you like to one computer.
Each is different and is recognized as such

Similar Messages

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How can i sync two different ipods to one computer

    How can i sync two different ipods to one computer

    How to use multiple iPods, iPads, or iPhones with one computer

  • Can i use two apple tvs with one itunes account?

    can i use two apple tvs with one itunes account?

    yes and you can use more then 2
    just don't give them the same name

  • How can I use two different Yahoo mail accounts ion Firefox?

    I have two Yahoo mail IDs. How can I use them both simultaneously on Firefox? Right now I am running Firefox and Internet Explorer so I can have the two accounts open at the same time. I would prefer to have both accounts running on Firefox, but I can't figure out how to do it.

    Multifox is an extension that allows Firefox to connect to websites using different user names. Simultaneously! <br />
    http://br.mozdev.org/multifox/

  • How can I use two different ToolTipUIs?

    Hi,
    I want to use two different ToolTipUIs depending (in my case) on the JRadioButton that the Cursor is hovering over. For some JRadioButtons, I want to use the default ToolTipUI, and for others I wish to display a large amount of text over multiple lines. It seems to me that this is not easily possible as ToolTipManager uses the same JTooltip for each component, so setting the UI for JToolTip will affect every tool-tip-text.
    Does anyone know of a simple method to achieve this goal? Or can someone please correct me if my understanding is wrong?!
    And yes, I do realise that I could just use the multi-line ToolTipUI for all tooltips.
    Thanks,
    Muel.

    As a point of interest, does anyone know why JToolTip doesn't have a public setUI(ComponentUI) method? Most other JComponents have such a method. This is really annoying because it means you have to do 1 of 2 things:
    1. Subclass JToolTip and subclass the particular JComponent
    public class WrappableToolTip extends JToolTip {
         public void setUI(ComponentUI ui) {
              super.setUI(ui);
    } //end class
    // and the subclass of the JComponent
    public class WrapToolTipRadioButton extends JRadioButton {
         public WrapToolTipRadioButton(String text) {
              super(text);
         public JToolTip createToolTip() {
              JToolTip toolTip = new WrappableToolTip();
              toolTip.setComponent(this);
              toolTip.setUI(new WrappableToolTipUI());
              return toolTip;
    } //end class
    2. Rank work around in particular JComponent
    public class WrapToolTipRadioButton extends JRadioButton {
         public WrapToolTipRadioButton(String text) {
              super(text);
         public JToolTip createToolTip() {
              JToolTip toolTip = super.createToolTip();
              ComponentUI oldUI = UIManager.getUI(toolTip);
              UIManager.put("ToolTipUI", WrappableToolTipUI.class.getName());
              toolTip.updateUI();
              UIManager.put("ToolTipUI", oldUI.getClass().getName());
              return toolTip;
    } //end classThis problem is really annoying, because I have to write 2 or 3 (depending on above methods) classes for something simple. If it were a different component, I'd just have to write 1 class - the UI class. Irritating!

  • How can I use two single-dimensional arrays-one for the titles and array

    I want to Use two single-dimensional arrays-one for the titles and one for the ID
    Could everyone help me how can i write the code for it?
    Flower
    public class Video
    public static void main(String[] args) throws Exception
    int[][] ID =
    { {145,147,148},
    {146,149, 150} };
    String[][] Titles=
    { {"Barney","True Grit","The night before Christmas"},
    {"Lalla", "Jacke Chan", "Metal"} };
    int x, y;
    int r, c;
    System.out.println("List before Sort");
    for(c =0; c< 3; ++c)
    for(r=0; r< 3; ++ r)
    System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);
    System.out.println("\nAfter Sort:");
    for(c =0; c< 3; ++c)
    for(r=0; r< 3; ++ r)
    System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);

    This is one of the most bizarre questions I have seen here:
    public class Video
    public static void main(String[] args) throws Exception
    int[] ID = {145,147,148, 146,149, 150};
    String[] Titles= {"Barney","True Grit","The night before Christmas", "Lalla", "Jacke Chan", "Metal"};
    System.out.println("List before Sort");
    for(int i = 0; i < Titles.length; i++)
       System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles);
    System.out.println("\nAfter Sort:");
    for(int i = 0; c < Titles.length; i++)
    System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles[i]);
    Generally you don't use prefix (++c) operators in you for loop. Use postfix (c++).
    Prefix means that it will increment the variable before the loop body is executed. Postfix will cause it to increment after.

  • How can portal use two different LDAP Server in UME

    Hi,
    My question is Can UME in portal be configured for multiple LDAP sources.Currently i have a setting in portal
    as follows:
    Server Name : Abcd
    port : 1234
    user : CN=" ",Ou=" ",Ou=" ",Dc=AD,Dc=my company,Dc=com
    password :
    user path : DC=AD,Dc=My company,Dc=Com
    group Path : same as user path
    I want to configure one more LDAP server to my portal UME,how can give values for that in above sttings.I even want these current settings to be enabled.
    Do anyone have idea on this.
    Thanks and Regards
    Rani A

    Hi again ,
    I know it can be done. But how urgent is this for you.
    I can get back to you in couple of days, me lil busy today.
    cheers,
    Anu...

  • How do I use three different Iphones on one computer?

    I have three different iphones being used in one house. So far only one has ever been uploaded and saved to iTunes on the computer itself. I've been scared to do the other two devices in fear that somehow all of our apps will combine or be lost. None of us have the same apps or music. How do I go about adding the other two phones? PLEASE someone help.

    Have a read Here...
    https://discussions.apple.com/message/18409815?ac_cid=ha

  • HT1386 How do I set up two different iphones on one itunes account without loosing contacts in each phone?

    We have a PC and my husband I want to both use one itunes account. I already have an iphone and itunes account that is set up. He just purchased an iphone and he just wants to use my account. Is this possible to do and how can we do this without overriding eachother's iphone contacts etc.
    Thanks

    How to use multiple iPods with one computer

  • How can I use two screens to display one window

    Before Mavericks, MAC OS allowed you to use two screens (next to each other) in order to display one (big) window of one application.
    That would mean that a window would start on your left screen en would continue on the right screen.
    With Mavericks, however, this not possible any more. The window of the application can only be seen on ONE of the screens (i.e. the left one).
    Can any one tell me whether I've missed certain options or how to adjust my settings in order to get this feature back?

    Hey CGNL,
    First, if you haven't already, set up the displays as an extended desktop:
    Choose Apple menu > System Preferences, click Displays, then click Arrangement.
    Follow the onscreen instructions.
    Then, use Mission Control preferences to uncheck/turn off the option for "Displays have separate Spaces":
    Choose Apple menu > System Preferences, click Mission Control
    Uncheck "Displays have separate Spaces"
    That should enable you to stretch whatever window you want across multiple displays.
    via: OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    and
    OS X Mavericks: Mission Control preferences
    http://support.apple.com/kb/PH13925
    Welcome to Apple Support Communities!
    Have a good one,
    Delgadoh

  • How to sync two different iPhones on one iTunes?

    My wife and I are using iPhones. We have an iMac at home.
    How can I sync both iPhones on the same iMac-iTunes without merging our contacts and data on the iMac?

    http://support.apple.com/kb/HT1495

  • How can I use two different PC's with Lr5.5 to manage and process my photos stored on external disk, and exchange the analysis between these two computers?

    I operate on two computers and would like to be able download  Lr jobs done on my laptop,  to my stationary PC, also used to process other images, all stored on the same external disk.
    In other words I want to process may photos on two PCs and to to have access to all analyses from one or even better from both computers independently.
    Samek.

    You need to put your photos AND LR catalog file (.lrcat) on the external drive, and make sure the external drive has the same device name or drive letter on both computers.
    I have been using LR this way for several years and it works fine as long as you MAKE A BACKUP of the external disk somewhere, in case you lose or drop/damage the external drive which is easy to do.  Nightly, or sometimes more than once a day, I copy all changes from my working external disk to another similar-sized external disk.  I have lost a disk, once, and dropped/destroyed a disk, once, but recovery is as easy as using what used to be the backup disk as the primary one, and buying a new disk for the backup device.  It does take some hours to copy the 1TB of photos to the new backup disk, but once that is done, it usually only takes a few 10s of minutes or less to copy what is new or changed each night.

  • How can I use two different page orientations in the same document?

    I am trying to have both portrait and landscape page orientations in the same document.  Pages doesn't seem to like this.  Is there a way?

    I tried to comment on another thread about this same issue, but the thread was closed.
    In the other thread; however, some asked why rotating one pages was necessary, and if they knew then maybe there would be reason to create the function.
    Well, I don't know about why anyone else needs it, but for me it's for the papers I have to write for my masters program. The professors like to have the rubric attached to the bottome of the document so they easily grade and keep things organized. They of course give directions on how to easily change the orientation of the last page in Word, but not all of use Word, or even want to use Word. Maybe I need to ditch Pages and go to Word? I'd really hate to do that!
    So, come on Apple, let's get this feature added, stat!

  • How can I use two different wireless home phone terminals, different locations, one at a time same phone number

    I have two locations and want to have a wireless home phone at each location with the same home phone number. Only one terminal will be used at a time.

    That's not what a cell phone is.
    You are talking about some kind of a separate communication system.  Like a walkie talkie or something that works over broadcast.  IP phones may be able to do something like that but you would somehow have to register the system to a single cell phone number, which wont work without a SIM card.

Maybe you are looking for

  • Calling results of a method from another class

    Very very new to Java, so apologies for the lack of basic knowledge. I am making a programme with 3 classes. One class gathers details about a module. Another about the results of this module (which requires some of the information inputted for the f

  • Problem when printing icons of an ALV grid

    I made an Alv grid report that has some icons.When i printed i don't see the icons but isee some characters ... What can i do ? Thanks a lot ....

  • Audiobook won't appear on tunes

    My audiobook wont appear in itunes. Even looked in the audiobook section, and it wasnt there. I tryed converting it to aac or mp3 or anything that itunes can format to it, and it didnt work. So is there anyway to fix these?

  • Photo Booth picture appearing in Email

    Hi there We bought a new IMac. My wife was playing around with it and somehow imported a picture from the Photo booth into my email. Now...every email I send or receive has this picture in it. How would I go about removing it? Any help would be appre

  • HT1277 I am able to get my mail but I cannot send.

    I have a gmail account and I am able to get my mail on my macbook air but I cannot send mail.