How can i use two monitors in my application?

Hello,
Background
I have a dual monitor card and two monitors which I want to use in my LabView application. The application gathers data from a complex sensor and calculates a number of results which need to be displayed graphically, this happens every 10 seconds or so. There is an awful lot of graphs which may be needed to be seen at some time but not routinely. The idea is that one monitor will display all the standard routinely displayed things and will not have any user input whilst the second monitor will display a tab control which has all the other graphs pickable.
Question
What I want to know is how I can programmatically tell labVIEW to put one vi up in one monitor and another vi in the other. I would then have them both maximised (which I know how to do). I would rather have the monitors set up as individual and that way I could keep the windows control bar on one monitor only. Thus one monitor would be a true user interface and the other simply a display.
Basically how do I tell LabVIEW to use one monitor for a specific vi and not the other.
The card I have is a matrox p650. Any comments would be appreciated.
Regards
Kevin

Hallo,
with new version of LV its more easy, but it also hasn't any troubles with LabVIEW 6.x or 7.x.
Especially with Matrox P650 you will get no any problems (we using
exactly this card together with G550 and our application supported
three monitors at the same time.).
I recommend to you following sequence:
- After installing driver turn on option for supporting different
resoluton on different monitors. As result you will get two absolutely
separate monitors.
- In Windows define which one is primary and which one is secondary.
(On primary monitor located taskbar and all messages dialog boxes will
appear.).
- Arrange secondary monitor in display properties - where he located (left from primary, or right)
- In your VI (which must appear on second monitor) use
FrontPanel.PanelBounds Property Node for positioning. You must set four
values for two corners. Easiest way to found right values is following:
read this property node in while loop and put indicator on front panel.
Then run VI, drag front panel onto second monitor and resize if
necessary, and then you will see right values for PanelBounds. You can
write this property node programmatically in run-time too.
hope it help,
good luck.

Similar Messages

How can I use two monitors to increase workspace?

how can I use two monitors to increase workspace?

Drag the tabs of any After Effects windows you want to the second monitor.

How can I use two database in an application?

When I use two database like CloudscapeDB and TestDB in J2EE1.3.1, I always get some exceptions, which is unknow source about one of them.I am doing a CMP entity bean application. Can someone tell how to set up the environment and what is problem about the exceptions I met?
Thanks.

Hi,
The basics for using the two databases is simple.
For database configuration you have to provide the driver class name, url, schema name and password during the creation of the connection pools. So u can create a as many no. of connection pools as the no. of the databases.
Hope it will work..

NX6600GT-VTD128 (AGP) How can I use two monitors simultaneously?

I tried to do so but didn't manage it?
What should I do?
Is it a matter of VGA drivers?

theodore80,
Use the latest nVidia ForceWare Drivers and you will be able to extand your desktop in the Display Properties.
Take Care,
Richard

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use two accounts ?

How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

How can we use two BOM

Dear all,
my scenario is in this way way-
how can we use two BOM for same material.first BOM for inhouse production. Second one for Subcontracting.(means i have to create Purchase order for partial qty.

Dear
1.Goto MM02-MRP4 view -Maintain two Production Version based on two BOM ( Alternative1 with Routing will be PV1 will be used for production in house where as Alt2 with routing having PP03 as control key for external operation -PV2 )
2.Assign the relavant production Version-PV2 in Subcontracting Info Record in ME11
Now, based on the production version assigned in Info Record system suggests the BOM while BOM explosion in Subcon Purchase Order
REFER : Subcontracting & BOM alternative
Hope this will solve your issue
Regards
JH
Edited by: Jiaul Haque on Sep 29, 2010 1:27 PM

How can I use the open in " My application" option to open image attachments.?

How can I use the open in " My application" option to open image attachments.?
I am trying to use the uti's given in the apple docs but just unable to do it however its working perfect for pdf and rtf files.
please help needed urgent.

Perhaps you should Contact the iTunes Store Customer Service:
Apple - Support - iTunes Store - Contact Us

How can I use two different Yahoo mail accounts ion Firefox?

I have two Yahoo mail IDs. How can I use them both simultaneously on Firefox? Right now I am running Firefox and Internet Explorer so I can have the two accounts open at the same time. I would prefer to have both accounts running on Firefox, but I can't figure out how to do it.

Multifox is an extension that allows Firefox to connect to websites using different user names. Simultaneously! <br />
http://br.mozdev.org/multifox/

Remote Desktop windows 7 ultimate can't use two monitors

i have two computers in another office that remote into two other computers here at my site, all 4 computers run windows 7 ultimate, about a week to 10 days ago the two remote computers can still connect to the computers at my site but can only use one monitor
not dual monitors as before the 10 days or so. The use all displays box is checked in the remote desktop client, i have two sonicwall firewalls with a site to site vpn connection between the offices that they use to remote
can't get the dual monitors to work, any help would be appreciated

Hi,
Here is a good blog talking about using multiple monitors in Windows 7 ultimate and Windows Server 2008 R2, please take a look if there are any restrict policy settings regarding the monitor numbers like: "Limit maximum number of monitors per session"
Using Multiple Monitors in Remote Desktop Session
Best regards
Michael Shao
TechNet Community Support

How can I use two displays with my Mac Mini?

How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?

Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

How can I use two database in Dataset in SSRS?

Hi,
I am using one query to generate my SSRS report. In that query I am using subquery. Now I am pulling data from multiple tales.
DB used in sub query is different than the rest of the tables DB.(So total I am using 2 DB(Database))
So I see that in SSRS, I can connect query(In DataSet Properties) to one DATA_SOURCE only, how can I use other database which is I used in sub-query?
I have to move this SSRS into PROD and I can't hard code that sub-query's DB name in my query.
Please give me suggestion. Thanks!!
Vicky

In SSRS 2008 R2 you can use the Lookup function (http://technet.microsoft.com/en-us/library/ee210531.aspx ) and LookupSet function (http://technet.microsoft.com/en-us/library/ee240819.aspx
Depending on your security set up, you can reference a table in a second database on the same server using a three part name: database.schema.table. This is more likely to work for you if you wrap your SQL command in a stored procedure.
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

How can I use two differant iphones on one itunes

I can i use two differant iphones on one itunes, and keep the content seperate?

You can sync as many iphones/ipod/ipads as you like to one computer.
Each is different and is recognized as such

How can I use two Airport Express N's together

I have just purchased the new airport express n and I have the one that I am currently using which is also an n.
How can I use both at the same time as part of the same network?

If your goal is to extend the wireless range of one AirPort with another, check out this Apple Support article.

How can I use two single-dimensional arrays-one for the titles and array

I want to Use two single-dimensional arrays-one for the titles and one for the ID
Could everyone help me how can i write the code for it?
Flower
public class Video
public static void main(String[] args) throws Exception
int[][] ID =
{ {145,147,148},
{146,149, 150} };
String[][] Titles=
{ {"Barney","True Grit","The night before Christmas"},
{"Lalla", "Jacke Chan", "Metal"} };
int x, y;
int r, c;
System.out.println("List before Sort");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);
System.out.println("\nAfter Sort:");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);

This is one of the most bizarre questions I have seen here:
public class Video
public static void main(String[] args) throws Exception
int[] ID = {145,147,148, 146,149, 150};
String[] Titles= {"Barney","True Grit","The night before Christmas", "Lalla", "Jacke Chan", "Metal"};
System.out.println("List before Sort");
for(int i = 0; i < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles);
System.out.println("\nAfter Sort:");
for(int i = 0; c < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles[i]);
Generally you don't use prefix (++c) operators in you for loop. Use postfix (c++).
Prefix means that it will increment the variable before the loop body is executed. Postfix will cause it to increment after.

How can i use two monitors in my application?

Similar Messages

Maybe you are looking for