How can I use two OID realms in an application in Jdev 10.1.2

hello,
We have an application in jdeveloper 10.1.2. We are using OID with jazn
The users of the application are in two different realms. Right now, the application can se the users on the default realm of the OID to authenticate them, but cannot se the other realm (and the users of that realm).
How can we do, to let the application be able to authenticate the users of the two realms.
thanks

Hi,
The basics for using the two databases is simple.
For database configuration you have to provide the driver class name, url, schema name and password during the creation of the connection pools. So u can create a as many no. of connection pools as the no. of the databases.
Hope it will work..

Similar Messages

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use two accounts ?

How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

How can I use two monitors to increase workspace?

how can I use two monitors to increase workspace?

Drag the tabs of any After Effects windows you want to the second monitor.

How can we use two BOM

Dear all,
my scenario is in this way way-
how can we use two BOM for same material.first BOM for inhouse production. Second one for Subcontracting.(means i have to create Purchase order for partial qty.

Dear
1.Goto MM02-MRP4 view -Maintain two Production Version based on two BOM ( Alternative1 with Routing will be PV1 will be used for production in house where as Alt2 with routing having PP03 as control key for external operation -PV2 )
2.Assign the relavant production Version-PV2 in Subcontracting Info Record in ME11
Now, based on the production version assigned in Info Record system suggests the BOM while BOM explosion in Subcon Purchase Order
REFER : Subcontracting & BOM alternative
Hope this will solve your issue
Regards
JH
Edited by: Jiaul Haque on Sep 29, 2010 1:27 PM

How can WLS use JSP pages in a Web Application witth just a JRE [Web Application, WAR, JSP, weblogic.jsp.pageCheckSeconds and JRE]

 How can WLS use JSP pages in a Web Application (either a .war file or a war directory structure) without a java compiler?
 I suspect either the JSP specification is flawed (i.e. it doesn't take account of servers using just a JRE), or BEA's implementation is broken.
 Production servers do not have a JDK installed. They only have a JRE. Therfore a java compiler is not present on the machine that the Web Application is deployed onto.
 On the development machine, when the server is requested to load the JSP it creates a tmpwar directory within the Web Application directory structure. This is then included in the resultant .war file thus:
 D:\war>jar -tf gmi.war
 META-INF/
 META-INF/MANIFEST.MF
 gmiService.jsp
 WEB-INF/
 WEB-INF/classes/
 WEB-INF/classes/com/
 WEB-INF/classes/com/bt/
 WEB-INF/classes/com/bt/gmi/
 WEB-INF/classes/com/bt/gmi/gmiService.class
 WEB-INF/getList.xsl
 WEB-INF/getListByConnection.xsl
 WEB-INF/getListByDistrict.xsl
 WEB-INF/getListByDistrictConnection.xsl
 WEB-INF/lib/
 WEB-INF/source/
 WEB-INF/source/build.bat
 WEB-INF/source/gmiService.java
 WEB-INF/web.xml
 WEB-INF/weblogic.xml
 tmpwar/
 tmpwar/jsp_servlet/
 tmpwar/jsp_servlet/_gmiservice.class
 tmpwar/jsp_servlet/_gmiservice.java
 When deployed on the production server with the web.xml file set to use the following values (note XML stripped):
 weblogic.jsp.pageCheckSeconds
 -1
 weblogic.jsp.precompile
 false
 weblogic.jsp.compileCommand
 javac
 weblogic.jsp.verbose
 true
 weblogic.jsp.packagePrefix
 jsp_servlet
 weblogic.jsp.keepgenerated
 false
 And in the weblogic.properties file:
 weblogic.httpd.webApp.gmi=war/gmi
 I've also tried with the .war file, but that insists on creating another tmpwar directory outside of the .war file.
 Then, although I have set pageCheckSeconds to -1 (don't check and don't recompile) ter production server still attempts to recompile the JSP's:
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: init
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param verbose initialized to: true
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param packagePrefix initialized to: jsp_servlet
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param compileCommand initialized to: javac
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param srcCompiler initialized to weblogic.jspc
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param superclass initialized to null
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param workingDir initialized to: /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param pageCheckSeconds initialized to: -1
 Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: initialization complete
 Mon Sep 25 11:40:12 BST 2000: <WebAppServletContext-gmi> Generated java file: /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.java
 Mon Sep 25 11:40:14 BST 2000:<E> <WebAppServletContext-gmi> Compilation of /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.java failed: Exception in thread "main" java.lang.NoClassDefFoundError: sun/tools/javac/Main
 java.io.IOException: Compiler failed executable.exec([Ljava.lang.String;[javac, -classpath, /opt/Solaris_JRE_1.2.1_04/lib/rt.jar:/opt/Solaris_JRE_1.2.1_04/lib/i18n.jar:/opt/Solaris_JRE_1.2.1_04/classes:/var/wls/5.1/weblogic/lib/weblogic510sp4boot.jar:/var/wls/5.1/weblogic/classes/boot:/var/wls/5.1/weblogic/eval/cloudscape/lib/cloudscape.jar:/var/wls/5.1/weblogic/lib/wleorb.jar:/var/wls/5.1/weblogic/lib/wlepool.jar:/var/wls/5.1/weblogic/lib/weblogic510sp4.jar:/var/wls/5.1/weblogic/license:/var/wls/5.1/weblogic/classes:/var/wls/5.1/weblogic/lib/weblogicaux.jar:/opt/wls-servers/gmiServer/weblogic/gmiServer/serverclasses:/opt/wls-servers/gmiServer/weblogic/lotusxsl.jar:/opt/wls-servers/gmiServer/weblogic/xerces.jar:/opt/wls-servers/gmiServer/weblogic/logging.jar::/opt/wls-servers/gmiServer/weblogic/war/gmi/WEB-INF/classes:/opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war, -d, /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war, /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.java])
 at java.lang.Throwable.fillInStackTrace(Native Method)
 at java.lang.Throwable.fillInStackTrace(Compiled Code)
 at java.lang.Throwable.<init>(Compiled Code)
 at java.lang.Exception.<init>(Compiled Code)
 at java.io.IOException.<init>(Compiled Code)
 at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(Compiled Code)
 at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:200)
 at weblogic.servlet.jsp.JspStub.compilePage(Compiled Code)
 at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
 at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:187)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:118)
 at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:142)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:744)
 at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:692)
 at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:251)
 at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
 at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
 at weblogic.kernel.ExecuteThread.run(Compiled Code)


The default Java compiler from sun lives in the tools.jar that comes with
 the JDK. Just add that to your set of JARs which are deployed in production
 and you should be fine. No need to install the full JDK - just make the
 tools.jar available to WebLogic.
 Regards
 James
 James Strachan
 =============
 email: [email protected]
 web: http://www.metastuff.com
 "Martin Webb" <[email protected]> wrote in message
 news:[email protected]...
 >
 > How can WLS use JSP pages in a Web Application (either a .war file or a
 war directory structure) without a java compiler?
 >
 > I suspect either the JSP specification is flawed (i.e. it doesn't take
 account of servers using just a JRE), or BEA's implementation is broken.
 >
 > Production servers do not have a JDK installed. They only have a JRE.
 Therfore a java compiler is not present on the machine that the Web
 Application is deployed onto.
 >
 > On the development machine, when the server is requested to load the JSP
 it creates a tmpwar directory within the Web Application directory
 structure. This is then included in the resultant .war file thus:
 >
 > D:\war>jar -tf gmi.war
 > META-INF/
 > META-INF/MANIFEST.MF
 > gmiService.jsp
 > WEB-INF/
 > WEB-INF/classes/
 > WEB-INF/classes/com/
 > WEB-INF/classes/com/bt/
 > WEB-INF/classes/com/bt/gmi/
 > WEB-INF/classes/com/bt/gmi/gmiService.class
 > WEB-INF/getList.xsl
 > WEB-INF/getListByConnection.xsl
 > WEB-INF/getListByDistrict.xsl
 > WEB-INF/getListByDistrictConnection.xsl
 > WEB-INF/lib/
 > WEB-INF/source/
 > WEB-INF/source/build.bat
 > WEB-INF/source/gmiService.java
 > WEB-INF/web.xml
 > WEB-INF/weblogic.xml
 > tmpwar/
 > tmpwar/jsp_servlet/
 > tmpwar/jsp_servlet/_gmiservice.class
 > tmpwar/jsp_servlet/_gmiservice.java
 >
 > When deployed on the production server with the web.xml file set to use
 the following values (note XML stripped):
 >
 > weblogic.jsp.pageCheckSeconds
 > -1
 >
 > weblogic.jsp.precompile
 > false
 >
 > weblogic.jsp.compileCommand
 > javac
 >
 > weblogic.jsp.verbose
 > true
 >
 > weblogic.jsp.packagePrefix
 > jsp_servlet
 >
 > weblogic.jsp.keepgenerated
 > false
 >
 >
 > And in the weblogic.properties file:
 >
 > weblogic.httpd.webApp.gmi=war/gmi
 >
 > I've also tried with the .war file, but that insists on creating another
 tmpwar directory outside of the .war file.
 >
 >
 > Then, although I have set pageCheckSeconds to -1 (don't check and don't
 recompile) ter production server still attempts to recompile the JSP's:
 >
 >
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: init
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 verbose initialized to: true
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 packagePrefix initialized to: jsp_servlet
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 compileCommand initialized to: javac
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 srcCompiler initialized to weblogic.jspc
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 superclass initialized to null
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 workingDir initialized to:
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp: param
 pageCheckSeconds initialized to: -1
 > Mon Sep 25 11:40:11 BST 2000: <WebAppServletContext-gmi> *.jsp:
 initialization complete
 > Mon Sep 25 11:40:12 BST 2000: <WebAppServletContext-gmi> Generated java
 file:
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.
 java
 > Mon Sep 25 11:40:14 BST 2000:<E> <WebAppServletContext-gmi> Compilation of
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.
 java failed: Exception in thread "main" java.lang.NoClassDefFoundError:
 sun/tools/javac/Main
 >
 > java.io.IOException: Compiler failed
 executable.exec([Ljava.lang.String;[javac, -classpath,
 /opt/Solaris_JRE_1.2.1_04/lib/rt.jar:/opt/Solaris_JRE_1.2.1_04/lib/i18n.jar:
 /opt/Solaris_JRE_1.2.1_04/classes:/var/wls/5.1/weblogic/lib/weblogic510sp4bo
 ot.jar:/var/wls/5.1/weblogic/classes/boot:/var/wls/5.1/weblogic/eval/cloudsc
 ape/lib/cloudscape.jar:/var/wls/5.1/weblogic/lib/wleorb.jar:/var/wls/5.1/web
 logic/lib/wlepool.jar:/var/wls/5.1/weblogic/lib/weblogic510sp4.jar:/var/wls/
 5.1/weblogic/license:/var/wls/5.1/weblogic/classes:/var/wls/5.1/weblogic/lib
 /weblogicaux.jar:/opt/wls-servers/gmiServer/weblogic/gmiServer/serverclasses
 :/opt/wls-servers/gmiServer/weblogic/lotusxsl.jar:/opt/wls-servers/gmiServer
 /weblogic/xerces.jar:/opt/wls-servers/gmiServer/weblogic/logging.jar::/opt/w
 ls-servers/gmiServer/weblogic/war/gmi/WEB-INF/classes:/opt/wls-servers/gmiSe
 rver/weblogic/war/gmi/_tmp_war, -d,
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war,
 /opt/wls-servers/gmiServer/weblogic/war/gmi/_tmp_war/jsp_servlet/gmiService.
 java])
 > at java.lang.Throwable.fillInStackTrace(Native Method)
 > at java.lang.Throwable.fillInStackTrace(Compiled Code)
 > at java.lang.Throwable.<init>(Compiled Code)
 > at java.lang.Exception.<init>(Compiled Code)
 > at java.io.IOException.<init>(Compiled Code)
 > at
 weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(Compiled Code)
 > at
 weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:200)
 > at weblogic.servlet.jsp.JspStub.compilePage(Compiled Code)
 > at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:173)
 > at
 weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:18
 7)
 > at
 weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
 :118)
 > at
 weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
 :142)
 > at
 weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
 l.java:744)
 > at
 weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
 l.java:692)
 > at
 weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
 Manager.java:251)
 > at
 weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
 > at
 weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
 > at weblogic.kernel.ExecuteThread.run(Compiled Code)
 >
 >
 >

How can I use two different Yahoo mail accounts ion Firefox?

I have two Yahoo mail IDs. How can I use them both simultaneously on Firefox? Right now I am running Firefox and Internet Explorer so I can have the two accounts open at the same time. I would prefer to have both accounts running on Firefox, but I can't figure out how to do it.

Multifox is an extension that allows Firefox to connect to websites using different user names. Simultaneously! 
http://br.mozdev.org/multifox/

How can I use two displays with my Mac Mini?

How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?

Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

How can I use two database in Dataset in SSRS?

Hi,
I am using one query to generate my SSRS report. In that query I am using subquery. Now I am pulling data from multiple tales.
DB used in sub query is different than the rest of the tables DB.(So total I am using 2 DB(Database))
So I see that in SSRS, I can connect query(In DataSet Properties) to one DATA_SOURCE only, how can I use other database which is I used in sub-query?
I have to move this SSRS into PROD and I can't hard code that sub-query's DB name in my query.
Please give me suggestion. Thanks!!
Vicky

In SSRS 2008 R2 you can use the Lookup function (http://technet.microsoft.com/en-us/library/ee210531.aspx ) and LookupSet function (http://technet.microsoft.com/en-us/library/ee240819.aspx
Depending on your security set up, you can reference a table in a second database on the same server using a three part name: database.schema.table. This is more likely to work for you if you wrap your SQL command in a stored procedure.
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

How can I use two differant iphones on one itunes

I can i use two differant iphones on one itunes, and keep the content seperate?

You can sync as many iphones/ipod/ipads as you like to one computer.
Each is different and is recognized as such

How can I use two Airport Express N's together

I have just purchased the new airport express n and I have the one that I am currently using which is also an n.
How can I use both at the same time as part of the same network?

If your goal is to extend the wireless range of one AirPort with another, check out this Apple Support article.

How can I use two single-dimensional arrays-one for the titles and array

I want to Use two single-dimensional arrays-one for the titles and one for the ID
Could everyone help me how can i write the code for it?
Flower
public class Video
public static void main(String[] args) throws Exception
int[][] ID =
{ {145,147,148},
{146,149, 150} };
String[][] Titles=
{ {"Barney","True Grit","The night before Christmas"},
{"Lalla", "Jacke Chan", "Metal"} };
int x, y;
int r, c;
System.out.println("List before Sort");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);
System.out.println("\nAfter Sort:");
for(c =0; c< 3; ++c)
for(r=0; r< 3; ++ r)
System.out.println("ID:" + ID[c][r]+ "\tTitle: " + Titles[c][r]);

This is one of the most bizarre questions I have seen here:
public class Video
public static void main(String[] args) throws Exception
int[] ID = {145,147,148, 146,149, 150};
String[] Titles= {"Barney","True Grit","The night before Christmas", "Lalla", "Jacke Chan", "Metal"};
System.out.println("List before Sort");
for(int i = 0; i < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles);
System.out.println("\nAfter Sort:");
for(int i = 0; c < Titles.length; i++)
System.out.println("ID:" + ID[i]+ "\tTitle: " + Titles[i]);
Generally you don't use prefix (++c) operators in you for loop. Use postfix (c++).
Prefix means that it will increment the variable before the loop body is executed. Postfix will cause it to increment after.

How can I use two screens to display one window

Before Mavericks, MAC OS allowed you to use two screens (next to each other) in order to display one (big) window of one application.
That would mean that a window would start on your left screen en would continue on the right screen.
With Mavericks, however, this not possible any more. The window of the application can only be seen on ONE of the screens (i.e. the left one).
Can any one tell me whether I've missed certain options or how to adjust my settings in order to get this feature back?

Hey CGNL,
First, if you haven't already, set up the displays as an extended desktop:
Choose Apple menu > System Preferences, click Displays, then click Arrangement.
Follow the onscreen instructions.
Then, use Mission Control preferences to uncheck/turn off the option for "Displays have separate Spaces":
Choose Apple menu > System Preferences, click Mission Control
Uncheck "Displays have separate Spaces"
That should enable you to stretch whatever window you want across multiple displays.
via: OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
and
OS X Mavericks: Mission Control preferences
http://support.apple.com/kb/PH13925
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

How can I use two ports in the same time?

My application need one pc use two ports the same time.But when I open one port and my systerm is running the other port can't be opened.
I use the frame API in VC++6.0.
My OS is win2000 server;
The functions I used are ncOpenObject();

Hi DickW
Thank you for your help!
I have tried the example.But the example shows how to connect one CAN network with two ports.
I want each port connect to the net can both read and write;
I want to apply the function like this:
1.config the port1 and port2
2,open port1 and port2
But after I open port1 or port2 the other port can't be opened;
After I open the second port it always returns negative.
In the codes I use CAN0 and CAN1 as the CAN objects.
Attachments:
twoport.zip ‏1184 KB

How can I use two database in an application?

When I use two database like CloudscapeDB and TestDB in J2EE1.3.1, I always get some exceptions, which is unknow source about one of them.I am doing a CMP entity bean application. Can someone tell how to set up the environment and what is problem about the exceptions I met?
Thanks.

Hi,
The basics for using the two databases is simple.
For database configuration you have to provide the driver class name, url, schema name and password during the creation of the connection pools. So u can create a as many no. of connection pools as the no. of the databases.
Hope it will work..

How can I use two OID realms in an application in Jdev 10.1.2

Similar Messages

Maybe you are looking for