How can I use "undone" after restarting my PC?

I did something stupid in iTunes (no songs are marked anymore). How can I reset it after restarting the Pc?
Thanx

Hi there
Captivate simply records what appears on your computer screen. So the trick is getting the iPad to display on your PC screen. There is an applicaton called Reflector that should allow this.
http://www.airsquirrels.com/reflector/
Cheers... Rick

Similar Messages

How can I use aperture after receiving the full adobe suite? It won't allow me to use it.

How can I use aperture after receiving the full adobe suite? It won't allow me to use it. I receive a dialogue box which states previews are not allowed in aperture and the application is shut down.

Aperture is Apples version of Lightroom. This has nothing to do with Adobe. Ask on a Apple forum. You won't find many people here using this program.
Mylenium

How can I use iMessage after deregistering my device?

I recently switched to WP8 and I realized I wasn't getting my text messages. After some research, I found that I need to deregister my device(s). That's fine and it seems to work. My question now is, how can I continue to use iMessage with my current AppleID without it somehow screwing up my text messages for my new phone?
For some perspective, I had my iPhone on, but the cellular turned off so that I could still use it for wifi. My iPad only has wifi. So I turned off my iPhone and suddenly my texts starting working on my new phone. That's weird, I thought. How come I'm getting messages on my iPhone through imessage? After turning off my iPhone, suddenly my iPad started picking them up. I then deregistered both devices, but I still wnat to use iMessage. Make sense? I hope so

Yes.
Once your iPhone is set up, on your computer add the phone number using Messages/Preferences/Accounts.
Messages Basics
Messages – Set up and sync between Mac and devices

How can i use ipad after erasing it

I cannot access my ipad after I erased it, I don't have access to the old email and the pass word and security questions aren't working, what can I do so that I can set it up again?

If you are trying to activate an iPad or iPhone and it is asking for a previous Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must enter the previous Apple ID and password to use the device. If you cannot remember the old Apple ID and password ou will never be able to activate the device and no one can help you do it.

How can i use "dbloginmodule" after migrating to jdeveloper 11?

Hi,
I have developed a simple system with dbloginmodule on jdevelper 10.132,but jdev11 does not support it ,what can I do ?

hi lixinzhu
See also this forum message by Frank Nimphius:
Re: How use DBTableOraDataSourceLoginModule in ADF Security in JDev 11g (Bo
"+However, WLS does have RDBMLauthentication providers already. You can configure the RDBMS provider through the weblogic console. As a long term strategy we like to bring back the option to configure custom JAAS LoginModules directly, but this will have to wait until the release of the full OracleAs 11 becomes available next year.+"
success
Jan Vervecken

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Hello, i found my lost iPhone and after a while it got automatically erased from find my iPhone. How can i use it again?

Retore the device from your iCloud or iTunes backup.
iOS: How to back up and restore your content - Support - Apple - http://support.apple.com/kb/HT1766

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

How can I use my Apple ID with 2 Apple devices?

I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

Thanks Roger W1,
Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
Thanks,
Jay

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

How can i use index in select query.. facing problem with the select query.

Hi Friends,
I am facing a serious problem in one of the select query. It is taking a lot of time to fetch data in Production Scenario.
Here is the query:
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
    FROM ztftelat LEFT JOIN ztfzberep
     ON ztfzberep~gjahr = st_input-gjahr
     AND ztfzberep~poper = st_input-poper
     AND ztfzberepcntr = ztftelatrprctr
    WHERE rldnr = c_telstra_accounting
      AND rrcty = c_actual
      AND rvers = c_ver_001
      AND rbukrs = st_input-bukrs
      AND racct = st_input-saknr
      AND ryear = st_input-gjahr
      And rzzlstar in r_lstar
      AND rpmax = c_max_period.
There are 5 indices present for Table ZTFTELAT.
Indices of ZTFTELAT:
Name   Description
0        Primary key( RCLNT,RLDNR,RRCTY,RVERS,RYEAR,ROBJNR,SOBJNR,RTCUR,RUNIT,DRCRK,RPMAX)
005    Profit (RCLNT,RPRCTR)
1        Ledger, company code, account (RLDNR,RBUKRS, RACCT)
2        Ledger, company code, cost center (RLDNR, RBUKRS,RCNTR)
3        Account, cost center (RACCT,RCNTR)
4        RCLNT/RLDNR/RRCTY/RVERS/RYEAR/RZZAUFNR
Z01    Activity Type, Account (RZZLSTAR,RACCT)
Z02    RYEAR-RBUKRS- RZZZBER-RLDNR
Can anyone help me out why it is taking so much time and how we can reduce it ? and also tell me if I want to use index number 1 then how can I use?
Thanks in advance.

Hi Shiva,
I am using two more select queries with the same manner ....
here are the other two select query :
***************1************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
    FROM ztftelpt LEFT JOIN ztfzberep
     ON ztfzberep~gjahr = st_input-gjahr
     AND ztfzberep~poper = st_input-poper
     AND ztfzberepcntr = ztftelptrprctr
    WHERE rldnr = c_telstra_projects
      AND rrcty = c_actual
      AND rvers = c_ver_001
      AND rbukrs = st_input-bukrs
      AND racct = st_input-saknr
      AND ryear = st_input-gjahr
      and rzzlstar in r_lstar
      AND rpmax = c_max_period.
and the second one is
*************************2************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
    FROM ztftelnt LEFT JOIN ztfzberep
     ON ztfzberep~gjahr = st_input-gjahr
     AND ztfzberep~poper = st_input-poper
     AND ztfzberepcntr = ztftelntrprctr
    WHERE rldnr = c_telstra_networks
      AND rrcty = c_actual
      AND rvers = c_ver_001
      AND rbukrs = st_input-bukrs
      AND racct = st_input-saknr
      AND ryear = st_input-gjahr
      and rzzlstar in r_lstar
      AND rpmax = c_max_period.
for both the above table program is taking very less time .... although both the table used in above queries have similar amount of data. And i can not remove the APPENDING CORRESPONDING. because i have to append the data after fetching from the tables. if i will not use it will delete all the data fetched earlier.
Thanks on advanced......
Sourabh

How can I use Microsoft Access on my Mac?

How can I use Microsoft Access on my Mac Pro?

Welcome to Apple Support Communities
Microsoft Access isn't available for OS X, so you can't use it. If you need it, you have to install Windows on a virtual machine.
On a virtual machine, you can install the Windows version you most like and the Access version you need, so you won't have any problem using it. You just need a full Windows version with its DVD or ISO image and product key, and an application like Parallels, VMware Fusion or VirtualBox to create the virtual machine. If you want to save money, System Builder versions are cheaper and you can find them at Amazon or NewEgg.
As you have a Mac Pro, I suppose you won't have any problem using a 64-bit version, but it's important you have enough memory. Open  > About this Mac, and check how much memory you have. I recommend 4 or 8 GB of memory at least.
After installing Windows on the virtual machine, you will be able to install Access there.
There are applications for OS X that allow you to run Windows applications without having to install Windows. Those apps often fail, so I don't recommend you to use them

How can i use a second router to replace verizon fios router?

Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How can I use "undone" after restarting my PC?

Similar Messages

Maybe you are looking for