How can I use VPN connection to access my Outlook email?

My company doesn't support iPhone's so I can't get any help from them -- here is my problem:
We run Outlook 2003 and they won't tell me the server name for Outlook. I have been able to connect to our Cisco VPN and access internal webpages, etc. Is there anyway I can use this VPN connection to retrieve my Outlook email?
Or is there anyway I can identify the server name I need to allow the iphone to connect to my Outlook?
Any help would be much appreciated.

Yes, it is possible to connect via VPN. However,if IT hasn't set up ActiveSync on the internal Exchange server, this won't work anyway.
The server name for your Exchange server is in the configuration of Outlook, so you can find it and use that to connect. But that doesn't mean that things are set up correctly to have this work.
To find your server name, (this is for Outlook 2007), Tools->Options and double-click on the account under the Email tab. The server name is next to "Microsoft Exchange server" on that screen.

Similar Messages

  • How can I sync up the calendar from Microsoft Outlook email with my ipad 2?

    How can I sync up my calendar from Microsoft Outlook with my ipad 2? Or do I have to enter in all of the dates individually?

    When the iPad is connected to your computer's iTunes, then on the device's Info tab you should be able to select where to sycn a calendar from - from the iPad manual :
    You can sync calendars from applications such as iCal on a Mac, or from Microsoft Outlook 2003, 2007, or 2010 on a PC. (On a Mac, you can sync calendars with multiple applications. On a PC, you can sync calendars with only one application at a time.)

  • How can I debug VPN connections on a Cisco ASA?

    Hi,
    I have a Cisco ASA and I am trying to get a Cisco 877 DSL router connected to it using the ASDM VPN wizard, but can't.
    I have just had the 877 DSL router connect to my Cisco Concentrator and have simlpy changed the peer address on the router to now point to the ASA's external IP instead of the Concentrator. The Concentrator is good because I like it's real-time event viewer and it can tell me if the Concentrator is even seeing the connection attempt, but how can I dall this on the ASA?
    Thanks

    show isa sa
    - that will show the status of phase 1
    show cry ipsec sa
    - that will show the status of phase 2, as well as number of encrypted/decrypted packets

  • How can I use eprint to print the my Outlook Calendar?

    How can I print my Outlook Calendar using ePrint?  I am running Windows 7, with Office 2007. the printer is a HPOfficeJet 6500A Plus.

    Hi Pestonji,
    Please download the ePrint Mobile driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?cc=us&lc=en&dlc=en&softwareitem=lj-96046-2
    I was an HP employee.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • How do I use the copy function in microsoft outlook email?, How do I use the copy function in microsoft outlook email?

    I can get into my Microsoft Outlook email on my Ipad2.  It will not allow me to copy parts of the email to paste into a program called Papermate that I use for my blog.  Can this be done?

    I've copied and pasted between programs. You hold your finger down in the text window or over the text until a little balloon pops up to copy or select all. You will also see two little blue dots, those are 'handles' that you can use to expand the selection box. Select what you want then choose copy
    I've then gone into another program, held down my finger in the text box to bring up the 'paste' option and the text transfers

  • How can i use the connection pool in JDBC2.0

    Thanks

    Hi,
    You can use DbConnection broker which directly returns connection to DB
    Try http://www.javaexchange.com/
    In that you can specify max and min pool connection pool size
    see example below:
    DbConnectionBroker dbBroker = new DbConnectionBroker(strDBDriver, strDBURL,strDBUser, strDBPassword, iMinPoolSize,     iMaxPoolSize, strLogFile, dblTimeInMillisBetResets);

  • How can I use the Connection Pool with DB2

    Hi All,
    I am facing the problem with the usage for the Connection Pool.
    I want to use DB2 via JNDI lookup.
    But when starting the Weblogic server, Error occured with the following message.
    <Error> <JDBC> <Cannot startup connection pool "MyJDBCPool" Cannot load driver class : com.ibm.db2.jdbc.app.DB2Driver>
    DB2 and Weblogic are on the same machine.
    In case of the use of remote DB2 database, I also encountered the same error.
    Configurations are as follows.
    <JDBCConnectionPool DriverName="com.ibm.db2.jdbc.app.DB2Driver"
    MaxCapacity="10" Name="MyJDBCPool"
    Password="{3DES}gCGsOfD9M6iwOtgL2v/NpA==" Targets="myserver"
    TestConnectionsOnReserve="false" TestTableName="test" URL="jdbc:db2://localhost:6789/yongjoo"/>
    <SNMPAgent Name="mydomain"/>
    <JDBCDataSource JNDIName="acsdb" Name="acsdb" PoolName="MyJDBCPool" Targets="myserver"/>
    Could you please give some information about this problem? I will appreciate your kindness.

    Hi Joe,
    Thanks your help.
    Perhaps It's my fault for Weblogic console's setting.
    After I reset the target server in console, Error message disappeared.
    But, when I call the TestCode, I encountered another error message. The error
    is NameNotFoundException.
    When lookingup the JNDI name, NameNotFoundException errer occured. I tried to
    change my setting and JNDI name, but the results are the same.
    Would you please give me some information about this one more time? I will be
    appreciated for your help.
    Follows are Config.xml
    <JDBCConnectionPool DriverName="com.ibm.db2.jdbc.app.DB2Driver" MaxCapacity="10"
    Name="MyJDBCPool" Password="{3DES}gCGsOfD9M6iwOtgL2v/NpA==" Targets="myserver"
    TestConnectionsOnReserve="false" TestTableName="test"
    URL="jdbc:db2://localhost:6789/yongjoo"/> <SNMPAgent Name="mydomain"/>
    <JDBCDataSource JNDIName="acsdb" Name="acsdb" PoolName="MyJDBCPool"
    Targets="myserver"/>
    and follows are TestCode,
    url = "t3://localhost:7001"; //default URL
    datasource = "jdbc/acsdb";
    Context ctx = null;
    Hashtable p = new Hashtable();
    p.put(Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.jndi.WLInitialContextFactory");
    p.put(Context.PROVIDER_URL, url);
    try{
    ctx = new InitialContext(p);
    System.err.println("initialContext(p)"+ctx); <-- success
    ds = (DataSource)ctx.lookup("java:comp/env/jdbc/acsdb");
    }catch(NameNotFoundException ne){
    throw new ConnectionException(); .
    }catch(NamingException ne){
    throw new ConnectionException();

  • How can I use my iPhone'hot spot to send email from my computer ?

    Hi,
    My land line is dead ... so no phone nor internet at home.  But I can use my iPhone'hot spot to get on the web from my iMac.  Great ... it works ! 
    Oups !   I cannot send email from my computer using my iPhone's hot spot with Mail.
    How do I do that ?
    Regards.
    Robert Lespérance

    Hi iCare,
    Thanks for helping ...   All that configuration is already done.  I am able to surf the web from my computer using my iPhone's hotspot.
    When I want to send an email from my computer, I get a message asking me to select the the SMTP server.  Then I select my usual ISP server, but the message comes back telling me it does not work.
    Is there any other configuration to do ?

  • How can I use a distribution list to send an email or an invitation

    I would like to know if I can have a distribution list (several people that belongs to a group) that at the moment that I would like to send them the same email or invitation, I just wnat to recall the name of my distribution list, as I do in Microsoft outlook, and then the mail or invitation goes directly to everyone that belogs to this distribution list

    Apologies. I should have said Ignore. I can't answer the question as it relates to an iPhone.

  • How can I format my Signature on Mac in Outlook emails?

    When I try to insert a Signature into the Outlook it appears with extra lines between each line, even though it is correct looking in the Signature block when I set it up. 
    For example:
    Joe Smith
    National Manager
    562-222-3666
    Appears in the signature as -
    Joe Smith
    National Manager
    562-222-3666

    instead of typing your signature block directly in Outlook, did you try typing on Word and then copy & paste to see if that might work?

  • How can i use connection pool within the sqlj?

    hello
    i am a beginner to sqlj,i find all of the sample code from the oracle DON'T use connectionpool,they only write the database url to "connection.properties" file,but i think in the production environment we should use the connectionpool to optimise the querying,i usually use the weblogic connection pool.
    how can i use the connection pool within the sqlj?
    thank you very much!

    Im not sure if I understand. :)
    English is not my best language...
    Looking up the connection again? Do you mean I have to create new DataSource object and bind it again to ServletContext?

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • How can I use MS Access in Lab View

    how can I use MS Access in Lab View
    Its urgent

    There are a couple of routes you can take to communicate with MS Access in LabVIEW. The preferred method is our Database Connectivity Toolset. This allows you to use VIs to communicate with your database. Here is a link to the product for more information.
    http://sine.ni.com/apps/we/nioc.vp?cid=6429〈=US
    Your other choice would be to use ActiveX. I believe there are a couple of examples on our web site using it. Overall you will probably spend a lot more time taking this route.
    Matt Kisler
    Applications Engineer
    National Instruments

  • I cannot load my google calendar, how can i decrypt the connection in order to have access?

    The information about this website says that the page has been encrypted because there is no authorized owner. I need access to my google calendar from work.
    How can i decrypt the connection? Is there other way to fix the problem?

    Restart holding down the CMD+R keys, launch Disk Utility and erase the HD, quit DU, and restore the OS. On first boot, use the Setup Assistant to do the migration. Details in Pondini's Setup New Mac guide.

  • How can I use voicemail on my iphone 4s? Here it says "Cannot connect to voicemail". What should I do? I'm from philippines. Is there any code or something that I should do first?

    How can I use voicemail on my iphone 4s? Here it says "Cannot connect to voicemail". What should I do? I'm from philippines. Is there any code or something that I should do first?

    I think I worked out a solution given my equipment.  I was looking around on other forums and I found the following post concerning the ability for iPhone 4S to be on 3G and wifi simultaneously.
    "I know this thread is old and op may have discovered the answer already. However, I am posting this just in case someone else might be looking for a solution.
    The solution does not require any additional software nor require a jailbreak.
    All you need to accomplish this is already built into every iPhone and iPad with 3G.
    Connect to your wifi and write down the IP address your router assigned you. Then, select static tab instead of DHCP and fill in the IP address your DHCP server assigned to your iPad. Next, fill in the subnet mask but leave the rest of the fields empty.
    You now have access to your wifi as well as 3G.
    I ran into this issue when I wanted to use live traffic using 3G for my iPad's GPS and still connect to my GoFlex Satellite using wifi. It works extremely well."
    AFter configuring my phone to the router, as mentioned above, I connected my Apple TV to the same router.  Using the mirroring option I was able to airplay Netflix, You Tube and Flixster flawlessly from my phone to the big screen.  Direct TV and HBO GO did not work however. 
    I Then tried to access items directly from Apple TV thinking that it could use the data from my phone.  I was wrong.  So all in all I'm able to stream about half of my movie entertainment applications given my situation.  I'm pleased.

Maybe you are looking for