How can i use wallpaper as background behind icons

Hi just wondering How can i use wallpaper as background behind icons. As a different background to the themed one?

Hi clarkkent26,
You can't do it yet, without jailbreaking the iPhone. I would recommend you to wait until June and you'll probably see some new application that will actually allow you to do so.
Hope this helps!
!http://signatures.mylivesignature.com/54486/122/A57996D55BE7ABB4A67DE686D381A27 4.png!

Similar Messages

How can I use a refrence background image ?

HI,
I need to register align horizontally and vertically) about 100 images to the first. I don't want to stack or merge them. An ideal way to accomplish this would be to be able to set the first image as a background reference image for all images in the group. There would be left/right buttons so I could advance through the stack, a slider to adjust the visibility of the foreground image, and up/down & right/left arrows so I could move the upper image a pixel at a time in any direction. In this case I don't need to rotate the image, but this would also be something a person might want to control. Then I would move through the group of images, stopping on each one to align the image to the first. One at a time, or after I am done, it would save all the aligned images to a new filename and folder, without changing the transparency of the image or in any way using the background reference image. Without rotating the images, every pixel in the new image would be the same as in the original, except moved. I would start by resizing the canvas of all the images so they have a border area. This way I can move the image around and not lose any of it.
Of course I could put the reference image in the background layer and the image to be adjusted above it on another layer. Then i can use the background as a reference by making the upper image somewhat transparent. Finially I could delete the background layer and save the image with just the adjusted layer. But this would be tedius with 100 images, even worse if there were 1000..
Is there a reference background image capability in Photoshop CC ? Is there a better or different way to do this ? Or can Bridge do it ?

Perhaps I need to explain my specific application. I have 120 images that are part of a time lapse sequence. The camera is photographing a meteor shower. I was able to capture a meteor which left a persistent trail that lasted about 5 minutes. Because the camera is on a tripod, the stars are constantly moving and in fact moved quite a bit during the 5 minutes the trail was visible. These images are of much higher resulution than the 1080 video I am producing. I have used premier to track the spot in the images and show the meteor and trail as a video close up that runs at about 15% speed. because the exposures were 30 seconds ;long, every 33 seconds, the sky has visibly moved from image to image. because I use only a few keyframes Premier tracks the spot smoothly. But since the pictures are each moved, not moving, the stars in the final video move back and forth with each image. they never go anywhere, but this movement is distracting and annoying. Theoretically I could eliminate this movement by having a different key for each frame. But the better way is to prepare the images so they are all aligned. Then there will be no movement at all.
You have seen this effect in documentaries. Here's a hypothetical situation. Someone has handheld video of an important event happening. because of the situation and the handheld camera, the picture moves around like crazy. To be able to view the event clearly as part of an investigation, each frame is aligned to the first so the subject doesn't move at all, while the image frame moves all around. I have seen this many times. Now I need to do it.
I have 120 pictures which all must be aligned so the stars in the picture do not move. i need to see a refrence image through the image to be adjusted, so I can move the image to be adjusted until its stars are perfectly aligned with stars in the refrence image. Of course this is like stacking, which is used to reduce noise and increase detail. but I don't want to stack the images, just adjust them horizontally and vertically, and then save them in their adjusted state.

How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

How can I use a pic from iPhoto as a background for a page, How can I use a pic as a background for a page

cd,
Insert the picture and position it as you desire
Make sure the picture is set to Floating in the Wrap Inspector
Arrange > Send Objects to Background
Regards,

How can i use panaroma wallpaper in iphone4 in ios7.1

how can i use panaroma wallpaper in iphone4 in ios7.1

Sorry, removed from the public release of iOS 7.0. Was only in the Beta version.

How can we use cl_gui_html_viewer      in a background process.

Hello,
Refering to this thread: Pie chart using Class cl_igs_chart ??
How can we use cl_gui_html_viewer     in a background process.
I want to execute a html code in bakground process in abap program.
but using cl_gui_html_viewer   I have an error with CNTL_ERROR in the method CONSTRUCTOR;
Thanks

Marie,
I don't know about HTML viewer specifically, but whenever a GUI object is needed to be used in background, there is a standard method to avoid CNTL_ERROR.
When a program runs in background, there is no "screen" and hence no GUI, and hence a custom control can not be displayed. That is why the program generates an error.
The trick is to avoid creating the custom control in background.
if sy-batch = 'X'. "background mode
*   We don't want to create the custom control
else. "dialog mode
    create object l_container exporting ...
endif.
* We really don't need a container for using CL_GUI_ objects
* Proceed with the normal coding
create object l_html_viewer
exporting
    parent = l_container

How can I use a vector image to stretch with the backgrounds in Muse master pages?

How can I use a vector image to stretch with the backgrounds in Muse master pages?

Maybe there's a bug. I think it's only showing it when it wants to because look:

How can I use an image as a folder background on icon

vista updated firefox - how can I use an image as a folder background for an icon of that folder (for desktop)

This is not a Firefox related issue or Firefox setting etc. This is a windows or OS setting, I provided the link below on how to change this in Windows Vista.
See:
'''[http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/how-do-i-change-the-folder-icon-in-vista-to-one/01261170-4e02-4c4b-8c02-141d1524ad3e?auth=1]'''

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use more lines to show a field of a row in a report?

How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
Thanks for any help.

I was wondering if an answer was found for this one.
I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

How can i use my custom login page in a custom partner application ?

Dear All,
I'm trying to customize a login page displayed other than the default sso login page
by submiting my form to the regular pl/sql procedure : "PORTAL.wwptl_login.login_url"
but i tried to type the requested partner application url in the browser i got the sso
login page other than my custom login page. So, How can i use my custom login page in a custom partner application ?
Regards,
Mohammed Amin
[email protected]

I cannot begin to express my level of frustration. I have been trying to use the composition widget light box display for some time now. I drag the widget to my document. The default widget has three small trigger boxes and a large area made up of a forward and backward button, a background, a text box and a frame for your image.
My steps have been …
I click on the little trigger box.
I click on the frame that holds the main image.
I go to the fill menu and browse my computer for my image and then click OK.
IT shows up on my screen. Yay
I attempt to continue using the next two trigger boxes provided in the widget.
After that, I add more by clicking on the little plus sign.
This is where all heck breaks loose.
Every single time I attempt to add thumbnails, something messes up. When I go to preview, either not all of my main images show up, or it starts with the wrong one, or some are missing. I have looked and looked for help on this and the only thing I can find is how easy it is to create a great portfolio lightbox display. But as we know, that only works when your thumbnails are the same image as the images in your lightbox. If you want something different, you have to use the composition wizard. I am finding it extremely difficult and confusing to customize.
Is there an exact sequence you need to use to add images to the slideshow? I am my wits end.

How can we use this Windows Genuine page ?

How can we use this page after the Firefox developers remove the "Enable Java" option?
Now I've downloaded this tool to check whether the Windows Genuine or not! But kept get the error message while installing the application!

The javascript option is NOT disabled by developers.
*Maybe this helpful explanatory article is worth reading <br />http://kb.mozillazine.org/JavaScript_is_not_Java
Maybe it helps if you give the links to the tool and pages you are talking about, along with a screenshot of any error messages.
* [[How to make screenshots]]
* [[How do I create a screenshot of my problem?]]
Background info on what I understand you may be interested in: WGA.<br /> (WGA is renamed Windows Activation Technologies & I have also heard it mentioned Windows Genuine Article)
* http://en.wikipedia.org/wiki/Windows_Genuine_Advantage
* http://support.microsoft.com/kb/892130 ''" Description of Windows Genuine Advantage (WGA)"''

How can i use perspective warp in trial version. its greyed out

i have downloaded trial version to try handson Perspective warp feature but its greyed out. how can i use it?

Puppet Warp, Transform>Perspective, Transform>Warp etc. can work without GPU acceleration (Test by CS6).
But it is necessary to unlock the background layer (double click in the layer panel converts the background
layer into an unlocked Layer0).
Best regards --Gernot Hoffmann

How can i use JSTL inside custom tag attribute

Hi,
I have one button tag which displays the button with round corner. I will show the button like this:
<ep:button key="buttons.submit" name="submitBtn" styleClass="But"
          onClick='submitPage(''<c:out value='${buttonName}' />)' />
I am getting the problem with the above code. how can i use JSTL inside the custom tags.
Thanks in Advance,
LALITH

No. The details are given below:
I have included the follwing line in web.xml file:
<taglib>
    <taglib-uri>/tags/button</taglib-uri>
    <taglib-location>/WEB-INF/button.tld</taglib-location>
</taglib>button.tld file
<taglib>
     <tlibversion>1.0</tlibversion>
     <jspversion>2.0</jspversion>
     <shortname>button</shortname>
     <tag>
          <name>button</name>
          <tagclass>com.ksi.ep.web.taglib.ButtonTag</tagclass>
          <bodycontent>empty</bodycontent>
          <attribute>
               <name>name</name>
               <required>true</required>
               <rtexprvalue>false</rtexprvalue>
          </attribute>
          <attribute>
               <name>key</name>
               <required>true</required>
               <rtexprvalue>true</rtexprvalue>
          </attribute>
          <attribute>
               <name>onClick</name>
               <required>true</required>
               <rtexprvalue>true</rtexprvalue>
          </attribute>
</taglib>ButtonTag.java :
public class ButtonTag extends TagSupport {
   private static final long serialVersionUID = 6837146537426981407L;
     * Initialise the logger for the class
    protected final transient Log log = LogFactory.getLog(ButtonTag.class);
     * holds the Value of the button tag
    protected String onClick = null;
     * holds message resources key
    protected String key = null;
     * The message resources for this package.
    protected static MessageResources messages =
                         MessageResources.getMessageResources
                                   ("ApplicationResources");
      * (non-Javadoc)
      * @see javax.servlet.jsp.tagext.TagSupport#doStartTag()
     public int doStartTag() throws JspException {
        StringBuffer label = new StringBuffer();
        HttpServletRequest request = (HttpServletRequest)pageContext.getRequest();
        try {
               log.debug("in doStartTag()");
               Locale locale = pageContext.getRequest().getLocale();
             if (locale == null) {
                 locale = Locale.getDefault();
             log.info("");
             label.append("<a border=\"0\" style=\"text-decoration:none;color:#FFFFFF\" href=\"JavaScript:");
             label.append(onClick);
             label.append("\" >");
               label.append("<table onClick=\"");
               label.append(onClick);
               label.append("\" ");
               if(onmouseout!=null && !"".equalsIgnoreCase(onmouseout))
                label.append(" onmouseout=\"");
                label.append(onmouseout);
                label.append("\" ");
               if(onmouseover!=null && !"".equalsIgnoreCase(onmouseover)){
                label.append(" onmouseover=\"");
                label.append(onmouseover);
                label.append("\" ");
               if(title!=null && !"".equalsIgnoreCase(title)){
                label.append(" title=\"");
                label.append(title);
                label.append("\" ");
               label.append("style=\"cursor:hand\" tabindex=\"1\" border=\"0\" cellpadding=\"0\" cellspacing=\"0\" background=\"");
               label.append(request.getContextPath());
               label.append(System.getProperty("file.separator"));
               label.append("images");
               label.append(System.getProperty("file.separator"));
               label.append("background1.jpg\" > ");
             label.append("<tr><td width=\"10\"><img border=\"0\" src=\"");
             label.append(request.getContextPath());
               label.append(System.getProperty("file.separator"));
               label.append("images");
               label.append(System.getProperty("file.separator"));
             label.append("leftcorner.jpg\" ></td> ");
             label.append("<td valign=\"middle\" style=\"padding-bottom:2px\"><font color=\"#FFFFFF\" style=\"");
             label.append(styleClass);
             label.append("\">");
             label.append(messages.getMessage(key));
             label.append("</font></td>");
             label.append("<td width=\"10\" align=\"right\"><img src=\"");
             label.append(request.getContextPath());
               label.append(System.getProperty("file.separator"));
               label.append("images");
               label.append(System.getProperty("file.separator"));
             label.append("rightcorner.jpg\" border=\"0\" ></td>");
             label.append("</tr></table></a>");
             pageContext.getOut().print(label.toString());
          } catch (Exception e) {
               log.error("Exception occured while rendering the button", e);
               throw new JspException(e);
        return (SKIP_BODY);
     * Release all allocated resources.
    public void release() {
        this.name=null;
        this.key=null;
        this.onClick=null;
}In my JSP I have mentioned the taglib directive as
<%@ taglib uri="/tags/button" prefix="ep"%>and
<ep:button key="buttons.submit" name="submitBtn" styleClass="But"
     onClick='overwritePreApprovals('<c:out value='${transactionalDetails['inPrepList']}' />')' />Servlet.service() for servlet action threw exception
org.apache.jasper.JasperException: /pages/pms/coordinator/Dashboard.jsp(325,48) Unterminated <ep:button tag
Thanks,
LALITH

How can I erase the residual background text and images from the backside of a scanned page?

How can I erase the residual background text and images from the backside of a scanned page?
Also, I wanted to know what each subscriptions included as far as my question above is concerned?
I am trying to edit a scanned page (pdf file) by changing some words and erasing the background from the page that is showing through it since the paper is so thin and want to know which subscription to buy in order to complete these tasks?

This cannot be done in Reader. I think you will need software like Photoshop. You may be able to get buy with Photoshop Elements, but I haven't used recent versions of that software. Using either software this will not be an automated task.

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

How can i use wallpaper as background behind icons

Similar Messages

Maybe you are looking for