How can I use web-console and element inspector simultaneously in Firefox 20+ as I could in Firefox 19-?

Yes, new web-developer all-in-one tools are total mess.
I didn't find the answer to this question either https://support.mozilla.org/en-US/questions/955612 but downgrade to Firefox 19.
But nor in Nightly, nor in Aurora, nor in Firefox Beta, nor in Firefox 20.0 I can use simultaneously web-console (where I test some style changing javascript code) and element inspector (where I instantly observe a reaction to my code). The only option I see is to switch every three seconds between them. How can I fix this except downgrading?

You can consider to use the DOM Inspector extension instead of the built-in Inspector.
*DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

Similar Messages

How can I use wget, cron and Automator to periodically pull a dynamic image from a URL to local storage, and then update a Keynote slide with that image, automatically?

How can I use wget, cron and Automator to periodically pull an image from a URL (which is dynamically updated - like a weather map, say - to local storage, and then update a Keynote slide with that image, automatically?

Any particular reason for those specific technologies? wget does not exist on a mac, although you can nstall it I guess. OS X has curl installed which should do pretty much anything you want to do with wget. cron is being replaced by launchd, although cron still exists on mountain lion.
As far as I can tell from automator all the standard 'actions' to access keynote available to it require keynote to be open and running, but does not provide a function to actually open it. So I think you will have to write some applescript, as a minimum to open and quit keynote. I notice that the keynote actions are mostly circa 2005 an wonder if they would even work.
Under utilities in automator 'actions' there is a capability to add applescripts as part of the workflow.
Also, note that cron is being dprecated by Apple and replaced by launchd. that said cron is stil on my mountain lion instalation.
This entry at stackoverflow shows use of cron with curl to get web urls. http://stackoverflow.com/questions/1683620/getting-started-with-cronjobs-on-a-ma c
If I have any time I may try and get this to work as it is quite interesting and new to me. But otherwise, good luck.

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

How can i use this sript and loade another movie?

Hi there, i used the following script to load a movie from the server;
var request:URLRequest = new URLRequest("url string");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
How can i use this sript and loade another movie? Can someone help me please?
[edited by moderator]

Sir, I changed it from:
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Dir.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
to
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Warning.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
When i expord the movie i get the following error.....
Scene 1, Layer 'Layer 3', Frame 1, Line 6 1151: A conflict exists with definition request in namespace internal.

How can I use the battery and let it be perfectly healthy?

Hello everybody!
I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
(Right now I'm performing the battery calibration)
I'd like to know how can I use the battery and let it be perfectly healthy.
For instance,
1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
2) I usually use to calibrate the battery once a month... Is it a good thing?
Thanks!
Andrea

Everything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
http://discussions.apple.com/thread.jspa?threadID=1764220

I am going overseas to Singapore how can I use my ipad2 and my iPhone without it costing me a fortune. I am in Australia

I am going overseas to Singapore how can I use my ipad2 and my iPhone without it costing me a fortune. I am in Australia

iPhone - Locating wireless carriers
The above will provide carriers in Singapore that you can use. You would get the SIM card from the carrier. Of course if you are somewhere that has WiFi service then you won't need the cellular connection.

How can i use PCIe 1433 and basler line camera to construct image and pocess it?

hello! every one ,I am new to machine vision.i have two problems to ask.First,how can i use line camera and 1433 to acquire 2-D image?second,if i want to pocess the 1-D signal ,how can i do it ?i expect for your answer ,thank you!

What you are trying to do is not something you can easily do in a forum, but I can give you the basics.
You have a CameraLink frame Grabber (PCIe 1433) and a LineScan Camera
The framegrabber needs to be configured to understand how to communicate with the camera. You need a file from the camera vendor. This file might already be installed. You can use MAX to check if it is, under Devices/IMAQ.
Assuming you can get to the point where you can communicate with the camera, you need to configure your acquisition.
Since the camera is a line scan camera, it captures image data one pixel ine at a time. You will need to configure the frame grabber to determine how many lines per image you want. The low limit is usually 1, and the high limit is either based on the framegrabber's internal memory, or that of the computer.
If you are using labview, you will need to open a sessing to the camera, acquire the image(s), and then close the session when you are done.
Once the image(s) are captured, you can performa analysis using the NI Vision Toolkit.
Sorry, but there is no way to condense years into one post.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

How can I use web fonts I purchased?

I purchased Avalon from Font Spring (http://www.fontspring.com/fonts/fontsite/avalon) and it came with web fonts.
How can I use the web fonts I bought with Adobe Muse?

Hi,
An update: Adobe Muse CC 2014.1 (released earlier today) includes support for self-hosted web fonts. To use a specific font in your Muse site (such as the Avalon that you purchased from FontSpring), you will need to install the system font (properly licensed for desktop use) and provide the corresponding web font files (properly licensed for use on a website).
Give it a try and let us know if you need help or run into issues.
Thanks,
Abhishek

How can i use the boolean AND here?

Hi,
how can i use the boolean expression AND in order to include it in the expression below so as that 2 condition must be true in order to get the respective data from the database?
java.sql.ResultSet res = statement.executeQuery("SELECT * FROM station9 " + "WHERE P =" + power);
regards

java.sql.ResultSet res = statement.executeQuery("SELECT * FROM station9 " + "WHERE P =" + power + " AND FLAVOUR = " + raspberry);

I have paired 2 seperate HMDX Jam wireless speakers. how can I use both speakers and listen to my ipod at same time?

I have paired 2 seperate HMDX Jam wireless speakers. how can I use both and ipod at the same time?

No, the iPod does not support that.

How can I use my iPad and iPhone in Europe without incurring high costs?

How can I use the iPad to communicate in the Netherlands without incurring huge charges?

Depends on how you are planning on communicating. If you use Wif, then no. If you are using cellular data, you would need to discuss this with your carrier. We wouldn't know here.
Cheers,
GB

The computer I use for Itunes only has XP so I can't use ICloud. My desktop has Vista so I can use it. But I don't want to lose all of what I have on my Iphone 4S and my two Ipads. How can I use the desktop and retain the apps, music, podcasts etc. I have

The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
I have a desktop that operates using with Vista.
I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
Isn't there a way to do this? Shift my library FROM my devices to the desktop?
Thanks

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

How can you use one image and edit it three different ways to export later?

I am a new Lightroom 3 user. How can use the same image and edit it multiple ways to produce mulitple images to later export? For example, I have a picture of a bride and groom. I want to use that image and create a color image, a black and white image, and a close up of their hands.

Do I need to do either of those options before I start editing the image at all? For example, what if I am working on the image and doing some creative edits. Then I think of another option that I could do. Is it too late at that time or can I still get the original image to begin with?

How can I use web-console and element inspector simultaneously in Firefox 20+ as I could in Firefox 19-?

Similar Messages

Maybe you are looking for