How can I utilize a 2nd Airport Extreme to extend a network but not WIFI, only hardwired?

Hi All. Need your help figuring this out. The location of the cable line in my home causes a bit of an issue for my internet dependant electronics. My computers have no problem connecting over Wifi but certain peripherals require an ethernet connection as Wifi is not an option for them. I have prepared this quick diagram to explain my perfect set up. I have a current gen Airport Extreme and a Previous gen as well. How can I set my 2nd Airport to receive the Wifi from my main airport, but then only serve as a router, not extend the WIRELESS network. Only provide a hardwired network. In other words, I know how to "extend network" with airport utility, but then the 2nd airport also casts its own wifi network and causes problems. I only want the one single Wifi network. The 2nd router should only be providing ethernet connectivity.
Is this even possible? Both Airports are running the most updated firmware. Any advice would be greatly appreciated!!!

With a properly configured extended network both AirPorts will be broadcasting the "same" Wi-Fi network. This shouldn't impact wired clients at all. The other advantage of using an extended network is that your older AirPort Extreme's Ethernet ports will be enabled for wired clients.
At present the only other option would be to connect the older Extreme to the newer one using an Ethernet connection between them. Then disable the older Extreme's Wi-Fi radios.

Similar Messages

Can I use my old AirPort Extreme to extend my network?

I recently replaced my year-old AirPort Extreme with a Time Capsule. The TC setup was the easiest ever, and it actually asked if it was replacing the AirPort and used the old settings, network name, et al. Had it up and running in five minutes and all computers and devices attached to it without any changes necessary.
So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV. I also have an old AirPort Express which isn't the 'n' model. What to do?

So now that I've got this AirPort, I'm wondering if I can use it like an Express and put it into the farthest reaches of my house to extend my network and attach it to my new Apple TV.
Yes, you could use the 802.11n AirPort Extreme Base Station (AEBSn) to extend the wireless range of the new TC. Whether or not, it will be successful, will depend on both at distance you are trying to cover and what form of Wi-Fi obstructions (walls, ceilings, floors, etc.) there are between the two routers.

How do i use a 2nd airport extreme both are newer models

how do i use a 2nd airport extreme both are newer models

I assume that you mean that you want to extend the range using wireless only.
This Apple Support Document will tell you exactly how to do that:
http://support.apple.com/kb/HT4259
The instructions assume that you have AirPort Utility 5.6 for Mac OS X Lion , so if you have not already done so, you will need to download and install this application to track the instructions in the support document.

How can I access HDD on Airport Extreme with iPad

How can I access HDD on Airport Extreme with iPad

Without third-party software I don't think you can. An iPad has no user-accessible interface to a file system. Just what is it you're trying to do?

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
Thanks

No more meseges.
في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
New discussion activity
Bob Timmons has posted in the AirPort community.
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

How do I install a new AirPort Extreme on a Windows network?

How do I install a new AirPort Extreme on a Windows network?

To configure a new 802.11ac Extreme requires AirPort Utility for iOS or AirPort Utility for OS X.
http://www.apple.com/airport-extreme/specs/

HT4260 Can I use a new airport express to extend a network?

If I am using an AirPort Extreme as my main wifi, but it is in bridge mode because I already have another router setup in dhcp on my network, can I use an airport express to extend my network, but use it hard wired?

can I use an airport express to extend my network, but use it hard wired?
Yes, assuming that you are asking about a new Express, or the 802.11n version.
This is very easy to do with the Mountain Lion operating system that you have.
(The "roaming network" link above assumes that you are using the Leopard or Snow Leopard operating system...although the general information there is good).
Connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express.
Power up the AirPort Express and wait a full minute
Click the fan shaped AirPort icon at the top of the Mac's screen and look for the heading of New AirPort Base Station. Just below that, click directly on AirPort Express there
AirPort Setup will open automatically and take a minute to analyze your network and then announce that the Express will be setup to "extend" your AirPort Extreme network
Enter a device name for the Express and click Next
AirPort Setup will take another minute to configure the Express
When you see the message of Setup Complete, click Done
That's it.

How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

They need to be registered under different Apple ID's. The initial Apple ID is set when you first start the phone up. If you've already registered the phone to the iTunes account, back it up to your computer, and then have iTunes do a factory reset. Go to www.icloud.com, log in with your current Apple ID, select "Find My iPhone," choose the iPhone you want to dissociate from your primary Apple ID from the upper left, and then click the little circled X ("remove").
When you start the phone, it will have you go through the setup process again, at which time you need to create a unique Apple ID for the device. You can then restore it from your iTunes backup to get back your apps and other settings.
Whenever you use the iTunes store, use the login information (Apple ID and password) that you were using before. Basically, the second Apple ID that you created is purely used for accessing iCloud services, which includes synchronization of contacts, iCal events, and other such things.

How do I use a 2nd Airport Extreme plugged into an Ethernet Wall Plug to join an existing wireless network to give me a better signal upstairs?

I have a 5th generation Airport Extreme giving me a great wireless signal on the 1st floor of my house. However the signal upstairs is weak. So I purchased another 5th generation Airport Extreme that I would like to plug into an ethernet wall plug upstairs. I would then like to have the upstairs Airport Extreme join the same network thus giving me a good wirelss signal upstairs. I have a MacBook Pro running OS 10.7.4. Can somebody give me step-by-step directions to set up the upstairs Airport Extreme?

I assume that the new AirPort Extreme is still in its original factory default settings.
Before you connect the AirPort Extreme, please connect a laptop to the Ethernet cable that will be used for the connection and turn off the wireless on the laptop. Make sure that you can can connect to the Internet before you begin to configure the AirPort Extreme.
Disconnect the Ethernet cable from the laptop and connect it to the WAN "O" port on the upstairs AirPort Extreme and power it up.
Open Macintosh HD > Applications > Utilities > AirPort Utility 6.1
Look in the upper left hand corner of the screen for a tab or box that reads "Other AirPort Base Stations (1)"
Click on that box,then click on the name AirPort Extreme xxxxxx
Wait a moment while AirPort Utility analyzes the network and then displays a message that the AirPort Extreme will be configured to extend your existing wireless network.
Enter a Base Station (device) name for the AirPort Extreme (and a device password if prompted), then click Next.
Wait another minute or two until AirPort Utility notifies you that the AirPort Extreme has been Set Up.
That's it.

Can I use a 2nd Airport Express to extend signal?

I have the AirPort Express 2nd gen. I play music via my iPhone & iPad when I am "in range" with the AirPort Express thru my home music system.
If I go outside, my iPhone drops the signal and music stops. My iPad on the other hand has a stronger signal and the music plays on in the same location.
Can I purchase a 2nd AirPort Express and use it as a wifi extender or range extender to increase the distance of my wifi signal?
Or, can I use any wifi router to accomplish this?
I'd like to stay all Apple, if possible, as mixing Apples and Oranges is not good.
If so, can someone please tell me how to set this up?
Thank you all for your valuable assistance.
SmokinTulip

The AirPort Express 2008 "extender" is about 80 feet away from the AirPort Express 2012 (new) model. Is this too far to get a good signal?
Wireless performance is affected by "interference". If you have a clear, line-of-sight path between the AirPort devices, then 80 feet may not be too great of a distance.
But, if there are walls or ceilings or other obstructions in the signal path that "interfere" with the wireless signal, the distance that the signal can travel and maintain decent signal strength and speed is dramatically affected.
On average, a typical wall (sheetrock and 2 by 4s) in a home will absorb anywhere from 10-20% of the signal. As you might imagine, a ceiling will absorb even more of the signal since it is thicker and more dense than a wall.
Heavy furniture, large mirrors (a mirror has a metal backing) will really slow down and absorb the wireless signal as well.
If the wireless signal must pass through multiple walls, or a ceiling and a few walls, not much of the signal will get through.....even if the distance might be only 20-30 feet between the AirPort devices.

I am trying to hook up a second airport extreme to extend my network. Can I do this without having another ethernet connection?

I am trying to hook up a second airport extreme to extend my wireless network. Can I do this without having a second ethernet connection?

Yes. Apple's instructions to do this are here:
http://support.apple.com/kb/HT4259

Adding a 2nd Airport Express to extend the network using WDS

I am a bit of a novice, but after I installed an airport express with my d-link wireless router to play itunes on my home stero, the music kept breaking up and stopping. I tried to change the channel, but it said mine was set on automatic and I cannot figure out how to change manually.
So reading apple's suggestions, they said to get another aiport express and extend the network with WDS. I purchased my 2nd express today and have been trying to install it using the airport express assistant. I have had to reset the 2nd express and the original several times. However, what i keep running into is after it gets through all the steps, it asks me for a password for "this basestation". I have read several help topics and it looks like i need to use "public" for this new airport express. I get through that step and then it gives me an unknown error (-6753). Does anyone know what this is? Or is there a way to set-up the 2nd airport express manually? Do I even need a 2nd one? Should I just get an airport extreme? Will that extend the range of my wireless network? Any help is greatly appreciated. I have been at this for about 6 hours now. My wife is going to kill me.

Will the manual for D-Link describe how to set up the
first airport express as a roaming network
No
do that via the apple settings once its connected via
ethernet cable?
Yes
Different channel.
Same network name, same security.
Ensure that distribute IP addresses (under Network) is unchecked.
When this is done, will I still be able to play
itunes through the first airport express?
Yes
Also, then once I do that with the first, then do I
just do the regular set-up for the second as a
network extender via the airport express assistant?
Yes
iFelix

HELP! Problem with setting up Airport Extreme in "extend wireless network mode"!

So I am trying to put my AirPort extreme in extend a wireless network mode. So I factory reset it, plugged it in, and went into Airport Utility to set it up. So it finds the device, and I set it up to extend the network. It does everything, and it gets set up. But there is an error message that says it was unable to extend the wireless network. Then 1 minute later, the Airport Extreme drops out, and the Airport Utility says device not found. I tried this multiple times, and it keeps happening. What should I do?

Unfortunately, the AirPort Extreme will not be able to wirelessly extend a Netgear product. That feature will only work if you are connecting the AirPort Extreme to another Apple router.
If you want the AirPort Exteme to provide more wireless coverage, you will need to plan to connect it to the Netgear router using a permanent, wired Ethernet cable connection.

How can I strenghten a weak Airport Extreme (2nd Generation) signal?

I have been having a weak WiFi signal in my Airport Extreme. Even when I am in a room that is less than 30 ft away.
Here are the details:
AirPort Extreme 802.11n (2nd generation)
     Version: 7.6.1
     Wireless Mode: Participate in a WDS network
     Wireless Security: WPA/WPA2 Personal
     Channel: 6
     Connect Using: Ethernet
My Airport Extreme is on the second floor of the house and is connected to a D-Link DIR 825 router that is on the first floor.
Sometimes when I am on the second floor, I get a better signal from the D-Link router than from the Airpot Extreme.
How can I strenghten the signal?
Thanks in advance

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme
Information about the device will be displayed in the area to the right
The 3rd Generation product was the first Apple simultaneous dual band router, introduced in March 2009. Minor changes were made in the chipsets between the 3rd Generation and 4th Generation versions with some antenna improvements added in the 4th Generation versions as well. The 4th Generation version was introduced in October 2009.

How can I utilize a 2nd Airport Extreme to extend a network but not WIFI, only hardwired?

Similar Messages

Maybe you are looking for