How can I utilize my same sun server?

Hello All,
I have 2 (two) Sun Edge V1280 server with 8 Processor and 32 GB RAM
And I have one Sun StoreEdge 3910 T3
One of this 2 server is not used at all.
For Apps 11.5.10.2 Application stack and Database stack for production instance is installed on the same server.
I want to utilize another server also cause users feeback is system is slow !!!
1) Should I move application stack on another server? If yes then how?
Or just few components?
Regards
Chirag Patel
Kenya

I never liked the T3 arrays devices from Sun. Last time we moved to 3510 FC arrays, 11i performance more than doubled.
I would be willing to bet 98% of your load is coming from the database sessions. The easiest move you could do it move the database and database Oracle Home to the other server. So even if you move all middle tier processes, your load average on the back end (and user perceived performance) might not change much unless you migrate to RAC.
Make sure you have current stats for the SYS schema, and do some performance tuning on long running processes. Tune the top 10 processes you see in statspack or SQL Area report, or manage the concurrent managers so that no more than one or two long running processes run concurrently, and users will see a huge difference. Also check to see if you have indexes that need to be rebuilt, especially in APPLSYS schema.
SQLAREAT.SQL - SQL Area, Plan and Statistics for Top DML (expensive SQL in terms of logical or physical reads)
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=238684.1
Collecting Statistics with Oracle Apps 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=368252.1
bde_rebuild.sql - Validates and rebuilds indexes occupying more space than needed
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=182699.1

Similar Messages

  • How can I utilize the feature "Project Proposal Workflow"?

    Hello,
    I am looking for any reference shows how can I utilize the feature "Project Proposal Workflow" in creating a Demand Managment process in Project Server 2013.
    Thanks

    Hi New_page,
    Basically this feature allows you doing what is called "ideation" in Project Server. From a SharePoint list (either in a dedicated site or directly in PWA), you can create ideas of projects and then initiate a project in Project Server from
    this list, mapping the list's columns with enterprise project custom fields and choosing an enterprise project type.
    See some references below:
    https://azlav.wordpress.com/2013/12/09/bulk-importing-projects-into-2013/
    http://www.alexandervanwynsberghe.be/basic-ideation-with-sharepoint-and-project-online/
    http://blogs.office.com/2012/11/05/demand-management-and-ideation-in-microsoft-project-online/
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • How can I configuration MBean in weblogic server  using the console ?

    How can I configuration MBean in weblogic server using the console ?
    I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
    can some body explain that or a link that explain it, how to do it on the console ?

    Hi,
    Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
    http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
    Thanks
    Jay SenSharma

  • How can we update data in LDAP server using PL/SQL.

    Hi,
    How can we update data in LDAP server using PL/SQL program.
    Is there any sample code for refrence.
    Thanks,
    Tarun

    Hi Justin,
    Thanks for your help. You got my correct requirements.
    Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
    I have the following information:
    the admin user and password,server info , port and ldap_base for admin.
    I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
    Please help me.
    Thanks,
    Edited by: james. on Jan 12, 2009 5:39 PM

  • How can i get the same itunes library on 2 macs

    how can i get the same itunes library on two different macs, without having to pay for icloud please.

    Copy everything from one computer to the other.

  • Hi,how can i transport objects from one server to other like (Dev To Qty)

    Hi Sir/madam,
       Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
    Regards,
    Vishali.

    Hi Vishali,
    Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
    Step 2: Release the subrequests first and then the main request by pressing Truck button
    Step 3: STMS or Customized transactions
    Object Collection In Transports:
    The respective Transports should have the following objects:
    1. Base Objects -
    a. Info Area
    b. Info object catalogs
    c. Info Objects
    2. Info Providers u2013
    a. Info Cubes
    b. Multi Providers
    c. Info Sets
    d. Data Store Objects
    e. Info Cube Aggregates
    3. Transfer Rules u2013
    a. Application Components
    b. Communication Structure
    c. Data Source replica
    d. Info Packages
    e. Transfer Rules
    f. Transformations
    g. Info Source Transaction data
    h. Transfer Structure
    i. Data sources (Active version)
    j. Routines & BW Formulas used in the Transfer routines
    k. Extract Structures
    l. (Note) If the transfer structures and related objects are being transferred without preceding
    Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
    Objects as well.
    4. Update Rules u2013
    a. Update rules
    b. Routines and formulas used in Update rules
    c. DTPs
    5. Process Chains u2013
    a. Process Chains
    b. Process Chain Starter
    c. Process Variants
    d. Event u2013 Administration Chains
    6. Report Objects u2013
    a. Reports
    b. Report Objects
    c. Web Templates
    Regards,
    Suman

  • How can I use the same "I Tunes" on two different computers

    I’m using two different kinds of Personal Computer: One is Desktop PC And the other one is Notebook .
    In each computer there are the same songs and when I get the new ones to the Desktop I want them to be placed on the Notebook or reverse.
    Where does the I Tunes save the playlist on the hard drive ?
    I have prepared a playlist on my Notebook and want it to be seen on the Desktop but I dont want to fallow the steps File > Library > Export Playlist on the Notebook. Is there any other way to make this issue instead of the mentioned steps.
    How can I see the same Playlists and songs on two different computers ( notebook and desktop) including the updating processes.
    Operating systems of the computers:
    Desktop: XP Pro
    Notebook: Vista Bussiness

    I use SyncToy 2.0 to keep two instances of my library in sync. SyncToy's preview will show which files it is about to update giving you a chance to spot unexpected changes and during the run only the changed files will be copied saving lots of time.
    As long as I sync after making updates at one instance of the library before making any updates at the other then everything works just fine. I periodically run iTunes Folder Watch to check for any orphaned entries or new items that haven't been imported into the active library. If your machines are regularly networked together this process is fairly straightfoward. Mine are in disparate locations so I use one of the (physically) small WD My Passport host powered drives which I take between home & work, synchronising at either end. This gives me three complete copies of my library so I'm covering backup & synchronisation in the same operation.
    When connecting my iPod at either location iTunes recognises itself as the "home" library for the iPod so I'm able to use the sync with selected playlists option without getting warning messages about the iPod being synced with a different library.
    tt2

  • My macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    That indicates a hardware failure. Read here:
    http://support.apple.com/kb/ts1559
    If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm.

  • How can i use the same cursor in a loop fro multipletimes.

    I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
    I am sending the code which i have written in When-Button-Pressed-Trigger...
    declare
         sid number;
         pid number;
    cursor csid is select distinct(site_id) from cyber_ppt;
    cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
         stdt varchar2(10);
         eddt varchar2(10);
         nom number;
         stmonth varchar2(10);
         edmonth varchar2(10);
         cjan number:=0;
         cfeb number:=0;
         cmar number:=0;
         capr number:=0;
         cmay number:=0;
         cjun number:=0;
         cjul number:=0;
         caug number:=0;
         csep number:=0;
         coct number:=0;
         cnov number:=0;
         cdec number:=0;
         i number:=1;
    begin
         open csid ;
         loop
         fetch csid into sid;
              exit when csid %notfound;
              message(sid);
         open cpid;
         loop
         fetch cpid into pid,stdt,eddt ;
         exit when cpid %notfound;
         message(sid||'-'||pid);
         stmonth:=substr(stdt,4,3);
         edmonth:=substr(eddt,4,3);
         nom:= months_between(eddt,stdt);
    while i <= round(nom)
         loop
         stmonth:=substr(stdt,4,3);
    if stmonth='JAN' then
              cjan:=cjan+1;
    elsif stmonth='FEB' then
              cfeb:=cfeb+1;
    elsif stmonth='MAR' then
              cmar:=cmar+1;
    elsif stmonth='APR' then
              capr:=capr+1;
    elsif stmonth='MAY' then
              cmay:=cmay+1;
    elsif stmonth='JUN' then
              cjun:=cjun+1;
    elsif stmonth ='JUL' then
              cjul:=cjul+1;
    elsif stmonth ='AUG' then
              caug:=caug+1;
    elsif stmonth ='SEP' then
              csep:=csep+1;
    elsif stmonth ='OCT' then
              coct:=coct+1;
    elsif stmonth ='NOV' then
              cnov:=cnov+1;
    elsif stmonth ='DEC' then
              cdec:=cdec+1;
    end if;
         stdt:=add_months(stdt,1);
         i:=i+1;
         end loop;
         end loop;
         end loop;
         end;
         

    try this /* untested */
    DECLARE
    sid           NUMBER;
    pid           NUMBER;
    CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
    CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
    stdt        VARCHAR2(10);
    eddt        VARCHAR2(10);
    nom         NUMBER;
    stmonth     VARCHAR2(10);
    edmonth     VARCHAR2(10);
    cjan         NUMBER:=0;
    cfeb         NUMBER:=0;
    cmar         NUMBER:=0;
    capr         NUMBER:=0;
    cmay         NUMBER:=0;
    cjun         NUMBER:=0;
    cjul         NUMBER:=0;
    caug         NUMBER:=0;
    csep         NUMBER:=0;
    coct         NUMBER:=0;
    cnov         NUMBER:=0;
    cdec         NUMBER:=0;
    i            NUMBER:=1;
    BEGIN
    FOR rec IN csid
    LOOP
                      sid := rec.csid;
    FOR cRec IN cpid(sid)
    LOOP
                     pid := cRec.pc_id;
                     stdt := cRec.st_dt;
                     eddt := cRec.ed_dt;
    stmonth:=  SUBSTR(stdt,4,3);
    edmonth:= SUBSTR(eddt,4,3);
    nom:= months_between(eddt,stdt);
    WHILE i <= round(nom)
    LOOP
              stmonth := SUBSTR(stdt,4,3);
    IF stmonth='JAN'
    THEN
             cjan:=cjan+1;
    ELSIF stmonth='FEB' THEN
             cfeb:=cfeb+1;
    ELSIF stmonth='MAR' THEN
              cmar:=cmar+1;
    ELSIF stmonth='APR' THEN
              capr:=capr+1;
    ELSIF stmonth='MAY' THEN
              cmay:=cmay+1;
    ELSIF stmonth='JUN' THEN
              cjun:=cjun+1;
    ELSIF stmonth ='JUL' THEN
              cjul:=cjul+1;
    ELSIF stmonth ='AUG' THEN
              caug:=caug+1;
    ELSIF stmonth ='SEP' THEN
              csep:=csep+1;
    ELSIF stmonth ='OCT' THEN
              coct:=coct+1;
    ELSIF stmonth ='NOV' THEN
              cnov:=cnov+1;
    ELSIF stmonth ='DEC' THEN
              cdec:=cdec+1;
    END IF;
             stdt:=add_months(stdt,1);
             i:=i+1;
    END LOOP;
    END LOOP;
    END LOOP;
    END;

  • How can I have the same environment on two macs on is a macbook pro and the other a Mac mini

    How can I have the same environment on two macs on is a macbook pro and the other a Mac mini ?

    Forget trying to use iCloud for this - it won't do what you want.  iCloud syncs certain data like contacts and events, but it doesn't sync "environments" on computers.

  • When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library???

    When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library???  All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found"   How can we merge them?? or how can we share all songs.. purchased or not!

    When you have 1 itunes library.. and 2 ipods.. different names.. how can you share the same library???  All of the songs that were put on there from a CD will sync, but the songs that were purchased.. "cannot be found"   How can we merge them?? or how can we share all songs.. purchased or not!

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • How can i use the same front panel graph in more than one events in an event structure?

    i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
    Solved!
    Go to Solution.

    Hi,
    I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
    Regards,
    Nitzz
    (Give kudos to good answers, Mark it as a solution if your problem is Solved) 
    Attachments:
    Graph and shift registers.vi ‏12 KB
    graph and local variables.vi ‏12 KB

  • I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

    Hi
    I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

    On the iPhone tap Settings > iCloud
    Switch Contacts off then back on then reset the device.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • How can I connect to a windows server from a mac book pro

    How can I connect to a windows server from a mac book pre?

    I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
    I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
    Any help is greatly appeciated.

Maybe you are looking for