How can I vary the volume within an audio clip, not just the ends, but throughout?

This is what was easily done in FCE by clicking to make points on the volume line, then dragging them up and down to fade music up and down during voice overs. If it's the the manual, I could not decipher it. Thank/s for any help.

How to add audio keyframes: http://www.premiumbeat.com/blog/fcp-x-audio-tutorial-part-3-using-final-cut/
or is you like video: http://www.youtube.com/watch?v=CsrLxqaY_f0

Similar Messages

How can I reinstall my Deskjet F4180 if I do not have the install disk

How can I reinstall my Deskjet F4180 if I do not have the install disk

Jerry, welcome to the forum. Since you didn't mention which OS you are using, I provided the Software and drivers page for Win 8.1. It provides the HP Deskjet F2100/F4100 All-in-One Printer series Full Feature Software and Driver. This will install the printer. If the OS is not correct, you can provide the correct one. Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.

How can I unlock my ipad 4 when I do not know the password

How can I unlock my ipad 4 when I do not kow the password

Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

Im trying to install a new application on my mac but it keeps on coming up with 'The volume of this disk does not meet the requirements for this update' any ideas how to solve this?

I have recently fully updated my mac to 10.8.2 and i am trying to install a small facebook application but every time i come to chose the disk it says ' OS X facebook developer preview can not be installed on this disk. This volume of this disk does not meet the requirements for this update' any ideas on how to get round this?
thanks

That may be the new Mountain Lion "sandbox" protective software kicking in, possibly, because ML "thinks" that App doesn't meet ML's new strict security requirements. A common phenomena. If you feel the 3rd party App is really OK, you can override this feature and install the new App by holding down the Command key when you click to install the new App. That's one possibility for the error message appearing. If not, another possibility is that that Developer Preview software package requires some previous piece of software be installed prior to downloading this Preview. You would have to check the Facebbok websiste's Developer Forums for help if this is the case.
Hope this helps

CAN I ENLARGE THE SIZE OF ALL TRACKS AND NOT JUST THE ONE TRACK AT A TIME

I would like to enlarge the tracks on the top half of the mix screen and not just the one track I'm working on. I find that most times I'm working in 2 or 3 tracks only and it would be great if I could enlarge the size of those to work with rather than the thin tracks they appear as. I realize if I click on one that it will appear larger below to edit but can I have all the tracks recorded appear larger?
[email protected]
Ross

NO

How can I print to a file? Msg: "Could not open the file, access denied"

How can I print to a file? Printing itself works fine, but I get this error message when I select the "print to file" box.

Hi gag5212, the "Print pages to PDF" extension does not use the normal print dialog. Instead, right-click the page and look for its menu there, or you can add its button to one of your toolbars.
I'm surprised by your results with the other sites.
The http://www.primopdf.com/ page layout is completely whacky. The product was acquired by the NitroPDF people, but what is going on here? Probably best to ignore that one for now.
On http://www.pdfforge.org/ you should get something like the attached on the download page. I'm alarmed to hear you got something strange. Do you have any extensions that you don't recognize? You might be infected with something that redirects your downloads in some way. Although Norton is generally a solid product, you should consider some supplemental scans. This article lists tools that other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]]

Please how can get back to my iOS6 ? I do not llike the graphics of iOS7

Please I need to know how I can get back my iOS 6.5. I just upgraded to iOS 7 but its graphics is too poor and it has a lot malfunctions I can not cope with. Please I use my iPad to earn my daily living in the studio and I do get quick help or solution, it will mean that a familly will be starved by upgrading to Apple iOS 7. Please how can I get back the iOS 6.5 back ?

That policy is not going to keep thier users. It will force them to switch to other products. Just get a good graphic artist to compare the iOS 6 graphics with so called new iOS 7.4, they will definitely tell the truth about it. Its unlike Apple products, even the worse android mobile device is far better than it. I strongly advise that they quickly get back the design of the older version into this new iOS 7 before thy begin loose thier admirers. Apple's quality graphis is one the major factor that made them stand out in the market. they should fast about. As at now, I will go tomorrow to buy another brand of mobile device, cause' I have to feed my family. We realy missed JOB.

How can i stream my powerpoint presentation with audio video content to the display devices

i wanted to stream my Power point presentation with audio/video content inserted in between the slides how can i achieve this requirements
is there any harware or software available for this
Please let me know
Thanks

This is not a straightforward procedure. I normally take the exported PPt file onto a windows machine and import the video files into PPt before sending to a client
Once the folder is copied to windows, the video files have to be imported again manually to relink the files as they loose the link in the export
Check that the video files are copied into the same folder as the Powerpoint file
The only file types playable from Powerpoint in widows are: mpeg wmv avi
Use wmv for best quality and compatibility

How can I get into my account that I do not have the password for

A new Photoshop serial number was created for me earlier. It was put in an old account that was still on Adobe's books and I do not have a password for it. My current account has all of my software licenses but does not have the new one that replaced what is listed in my main account.

Customer service can merge both of your accounts into a single one.
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

How can you take our money for gifts cards and not fix the problems or offer support AFTER it's paid for?

I am EXTREAMLY annoyed after a 3 hour run around in trying to use my gift card! I promised some apps to my little kids and mommy is busy trying to figure out why it shows a $25 credit but also says my credit card security code is wrong. It's CORRECT and my credit card shouldn't even be used!! I have been raving about IPAD to my friends and told them the apps were great learning tools for their kids. I even shared mine with my child care provider and she was thinking about getting one for her daycare.... Then showing parents who may like it. I WILL be sharing the lack of support for your gift cards! Perhaps I will just go back to the other learning games for my kids and buy games I can count on. We have Lots of Leap Frog and others and not once have I found such a run around!

Did you try logging into your iTunes account on your computer rather than on the iPad? It may not make any difference but you don't know until you try.
One other thought - why dont you restart your iPad and see if that helps. Hold down on the sleep button until the red slider appears and then slide to shut down. hold the sleep button until the Apple logo appears to power up. Let the iPad fully restart and see if you can go into your account in settings and remove the credit cards - see if None shows up in the settings.
I restarted my iPad yesterday when I was having iTunes store issues and the issues cleared up. It may have been purely coincidental but its worth a try.

I can't not play my games anymore, the curser (shotting balls) hesitates and slow down the game, how can i go back to previous version. it's not in the previous version box in properties

I WANT TO GO BACK TO PREVIOUS VERSION, BUT IT'S NOT IN THE PROPERTIES. THIS VERSION DOES NOT WORK WITH THE GAMES I PLAY, IT'S MESSING AND SLOWING THINGS DOWN

Sorry to hear this. What have you tried in the way of troubleshooting? Have you tried running from a new user account ?
This really isn't the best place to reach out to Apple. It's a user-to-user forum. A very long shot, but you could contact an Apple retail store and possibly they'll be able to help…but that assumes you didn't update your project and events if you need to work on any of those shows.
For some time, contributors here and other FCP forums have reminded people to follow Apple's best updating practices and archive the pre-update version of the app as well as their projects and events. Absent those archives, there is also the possibility of doing a restore from Time Machine (or some other BU utility), if used.
Best of luck.
Russ

How can I set which projects use Proxy Media and not just change every project?

Hi there
I can see how to change ALL projects to use Proxy Media or Original/Optimised Media
in
Preferences>Playback
But I'm switching between projects a lot and I only want to use Proxy Media on one project, so how can I tell FCPX to only use Proxy Media on that ONE project?
Thanks

Perhaps if apple didn't take back prores LT this wouldn't be as much of an issue.
Pores LT was a great compromise between file size and quality. It produced a fine image for most peoples needs and was 30% smaller.
Hopefully it will be returned soon. I can't imagine why it's not already there. Unless they want to charge for it, ... again..
Have you tried capturing as full res, then change prefs back to proxy, open a new project and import the full res files?
In FCP7 the render pref was separate from the capture pref. is that gone too?
If my idea doesn't work, Surely someone will chime in with a creative work around to this.
And hopefully it'll get fixed soon in an update.
Best,
g

How do I set a background picture for my homepage, not just the edges but the entire screen?

When I use other web browsers I have the ability to set a background picture on my homepage. How do I do that on Firefox?

Is this picture to be used in a drop zone or used as the total background of a theme? If the former it's not possible to do that as that's the nature of the drop zone .
For a general background for the menu the image should have a 4:3 size ratio in the landscape orientatikon. For a portrait oriented photo that would mean either cropping to a 4:3 landscape ratio or creating a 4:3 landscape canvas and putting the portrait image in the center, edgo or wherever and using the composite image. There will be some white space but that can be filled with a color that goes with the image.
Of course you will need to use 3rd party image editor that an handle layers or Pages.
Some Image Editors That Support layers:
Photoshop Elements 11 for Mac - $79
Rainbow Painter - $30
Imagerie - $38
Acorn - $50
Pixelmator - $60
Seashore - Free
GIMP for Mac - Free
Xee 2.1 - free
You will get something like this:
One could move the image to the right or left edge for better esthetics and have the buttons in the "white" area.
OT

HT1937 how can i unlock my iphone 4 if i`m not in the country of origin?

i have a iphone 4 blocked on orange switzerland and i`m living in romania ... the cost of unblock are very high in my country so i`m askyng you if you now a cheaper way to do it ...

The only way to unlock your phone is to call the carrier to which it is locked, only they can unlock it if they offer that service.

How can I vary the volume within an audio clip, not just the ends, but throughout?

Similar Messages

Maybe you are looking for