How can I video conference using a MacPro and a Apple Cinema Display ?

Is there any way to video conference using iChat with a MacPro and an Apple Cinema Display? There is no built in iSight in these displays.

Logitech is releasing a camera just for macs. That should do the trick.
http://www.logitech.com/index.cfm/webcam_communications/webcams/devices/4528&cl= us,en

Similar Messages

How can I deploy EFS using Group Policy and automatically encrypt computers for ALL users who login?

How can I deploy EFS using Group Policy and Active Directory with a goal to automatically encrypt computers for ALL users who login? (NOT an option for me to use BitLocker)
I was asked to deploy EFS to encrypt the user my documents folder and profile on all of the users laptops. The laptops are in common areas (board meeting rooms, etc) and security of files is a must.
I successfully created a recovery certificate in AD. I created an OU and setup an EFS policy and users can now login and select to encrypt their own files. The issue is that management would like to have automaticy Encrypt ALL users my documents AUTOMATICALLY
when a user login.
Can this be done?
Please help

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Using the MacPro with the LED cinema display

When using the MacPro with a LED cinema display (or any other external monitor in fact), is it possible to make it so that the main display (the screen showing the dock and menu at the top) is assigned to the external monitor?

Hello.
Yes, you should be able to do this through +System Preferences>Displays+.
Just click and drag the menu/dock (from within System Preferences) to the display you require.
Best
John

Where can I purchase a Logic Board for a 24" Apple Cinema Display?

My 24" Cinema Display started to flicker and black out shortly after I purchased my most recent MacBook Pro. Apple felt that the issue was the MacBook Pro so they replaced it. The problem continued so they suggested I take the Cinema Display to the Genius Bar. The display was out of warranty and the Apple Genius felt the issue was a bad display even after I told him I smelt silicon burning just before it went out completely. He said that he could "depot" the unit and have it repaired for ~$600. Due to the high cost of repair, I chose to purchase a new Thunderbolt Display instead. Recently, I opened the old Cinema Display and found that the Logic Board is fried. I have ordered a new board from 2 different Web retailers. Both accepted the purchase as "in stock" but then stated they could not get the board from Apple. Where can I purchase the Logic Board for a 24" Apple Cinema Display?
Many thanks!

I was very interested to read this document. I think there is a problem with the Cinema Display and that it is frying the computer.
My husband bought each of us a macbook pro. His was hooked up to the cinema display. After about a year, his MBP started to suffer intermittent failures where it would suddenly shut off and have to be hard rebooted. After 2 years, the power or logic board on his MBP completely failed. He bought a new MBP and a Thunderbolt display, and I inherited his Cinema Display for use with my original MBP.
After one month of use with the cinema display, my MBP started to have the same problems. It has to be hard rebooted almost every time I disconnect or reconnect with the cinema display. I went to the Genius bar, and they confirmed that my MBP logic board needs to be replaced; I'm just holding out until spring break to take it back in, as they say it may take a week. Fortunately, I have AppleCare for my MBP.
Our cinema display is 3-4 years old, but it looks like, even though it appears to be working, I should probably get rid of it. I can't keep frying computers!
I'm posting this because I'm wondering how many others are experiencing this problem.

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

How do i connect my Fujitsu Tablet + mac Pro to Apple Cinema Display 23'?

Dear Mac users
thanks in advance for your help.
I currently own:
• Fujitsu T 4220 (tablet) – Mobile Intel 965 Express – 60 Hertz – goes up to 1680*1050 (guess SXGA) – (it has the following other supported resolutions: 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600)
• Mac Pro
• Apple Cinema Display 23’
What I would like to do is, please refer to the jpeg posted on http://www.flickr.com/photos/34831802@N06/3234336204/, connect – at the same time – my tablet pc and my Mac Pro to the 23' Apple Cinema Display and switch (when I need) from tablet to MacPro using the same 23’ ACD. Top would be to be able to switch for one to the other while they’re both switched on. Usually on 2 pc’s with vga I’d use a switch A → B (in the jpeg it would be I → E) with a selector.
Have been reading different posts such as: http://discussions.apple.com/thread.jspa?messageID=8000641&#8000641 or http://discussions.apple.com/thread.jspa?messageID=6530475&#6530475 or
http://discussions.apple.com/thread.jspa?messageID=7417258&#7417258
+ others on the net and have (hopefully) understood that:
a) from Vga to Dvi I need a converter such as Geffen’s or similar
b) the problem with ACD 23’ is that it has only 3 resolutions: 1024*640, 1280*800 or 1920*1200
In the attached image I guessed a connection in order to connect – at the same time – both the machines to the 23’ ACD:
1) my fujitsu tablet (i in the image) has to be connected, with a Vga cable (h), to the Vga → Dvi converter (g).
2) from the Vga → Dvi converter (g) I need to connecto to the Dvi switch (c)
3) easier is connecting the Mac Pro (e), since I only need a Dvi cable (d) to connecto to the Dvi switch (c)
4) the Dvi switch (c) will then be connected to the 23’ ACD with a Dvi cable
Now, my questions are:
a) is the solution described above (Vga cable (h) to the Vga → Dvi converter (g)) a good solution or should I use, instead, a docking statione that comes with a Fujitsu Port Replicator (FPCPR65) which has a 1 x DVI-D port?
b) Given the 3 resolution accepted by the 23’ ACD (1024*640, 1280*800 or 1920*1200), I do not understand if I can use my tablet through a Vga to Dvi Converter and at which resolution (my tablet has the following other supported resolutions: 1680*1050, 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600).
c) Is there a way, also using an external video card or converter, to bring my resolution from 1680*1050 to 1920*1200? (the 16:10 ratio is in fact the same = WXGA (1280x800), WXGA+ (1440x900), WSXGA+ (1680x1050), WUXGA (1920x1200)
d) Talking about Vga → Dvi converter (g), am aware of the gefen product. Can you please list some others that might be good as well?
e) And how about the DVI switch? Any will work? Any particular suggestion?
Thank you very much for your help.
If you have any other suggestion, please let me know.
Regards,
Emil

Noone to help me?
No ideas?
Thanks,
Emil

Cannot make video conference using Cisco TelePresence and Conductor, registered to CUCM

Hello,
We've got CUCM 9.1.2, Conductor XC3.0.2 and TP 4.1(1.79).
The conductor is configured as ad hoc and as rendezvous on the CUCM, Using secure SIP trunk (TLS)
When we try to make a video conference as rendezvous the call is been initiated as audio only.
When we try to merge 2 p2p video calls with third call for ad hoc conference, we get an error that the merging is failed
Our end points are SX10 and SX20.
On the SIP logs it seems like the CUCM is replying with ACK message without Video capabilities even though the conductor is suggesting those capabilities.
Any suggestions?
Thanks!!!

I will try to.
The region and location are configured for video capabilities.
What else can cause the CUCM to reject video?

How can a video editor use an NTSC studio monitor on the new iMac without a Firewire 400 port?

Looking at the new iMacs (hungrily) and wondering how I will be able to continue using my Sony DSR-11 and NTSC monitor in the absence of any Firewire 400 port. I suppose there may be cables that will allow me to use the Firewire 800 port and am thinking they may be difficult to locate.

No they're not - they're available from many sources; i.e. I bought a FW 400 > 800 cable when I bought my iMac last August (at an authorized local reseller). Just google Firewire 400 > 800 and you'll get plenty of results. You can also opt for an adapter if you prefer. Both are also available at the Apple store online.

How can I play mpeg on my iMac and other apple devices

I received a movie clip to my email(apple) from a cell phone. It is labeled video0131.mpeg. I can not play it. Would like to be able to play. I have installed on my iMac flip4mac. Still does not play. When I click on the link that says video0131.mpeg I get an error message error: no associated application could be found. Please help. Greatly appreciated.

Hello
I am sorry I am not able to understand the link you sent me about quicktime. I am operating Mac OS X version 10.6.7. I sent myself from my cell phone a video to my mailbox. When i go to mail and open it up it shows the logo pic of movie clip then right next to it the link video0131.mpeg when i highlight the link it also shows this right after video0131/cid:422, I go to click on link or movie clip pic and i get an error message no associated application can be found. I have installed on my computer quicktime player 7 also flip4mac.Not sure hat has happened or am I doing something wrong. Thanks for your help

Where can I buy a Brand New Apple Cinema Display 30"?

Hi,
I Already posted my question in the older Display topic, but I'm not sure it was the good place, so I post it here. If it's not the good place, you can move my thread to the good topic. Thanks.
I'm looking for mounths to buy a brand new 30" Apple Cinema Display. I went to some Apple reseller/Apple Stores and each of them didn't really knew where I could buy it since it's discontinued. I can't believe there is no brand new 30" Apple Cinema Display lying around in some Apple Stores/Apple general center at Toronto or anywhere in USA.
I really want one of them, and I'm ready to make anything to get one (phone call etc). I would like to get some help of where I can call or where I can go to get what I want. The price doesn't really matter now.
Thanks!

Have you done google searches for it ("Apple 30" cinema display")? That's all I can recommend.
A quick google search turned up this page which apparently lists some new 30"s.
Note, I did not follow those links to see if "new" really meant "new".

I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for that.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?

G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?

The slightly bigger question is whether you want to move all movie content to the external drive (essentially meaning that drive will always need to be attached when you're working with your videos), or whether you just want to archive older videos off to the external drive.
If you want to move all videos, then just move the 'Movies' folder in your home directory to the external drive, then create an alias of the external 'Movies' back in to your home directory. Now the 'Movies' icon in your home directory will point to the external drive and everything will just work (as long as the external drive is attached when you launch iMovie)
If you want to archive older movies then each Movie should have its own subdirectory within your Movies folder. These can easily be moved off to the external drive, and moved back should you ever need to work on those movies again.

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT5517 How can have full picture using mirrored image from iPad

How can have full picture using mirrored image from iPad on my Apple TV airplay

Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

How can I video conference using a MacPro and a Apple Cinema Display ?

Similar Messages

Maybe you are looking for